802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle to Shop For Your Brake Pads

Choose a Year for your Eagle 's Brake Pads

  • 1998
  • 1997
  • 1996
  • 1995
  • 1994
  • 1993
  • 1992
  • 1991
  • 1990

Shop By Brand

The Following brands are available based on your search.

  • Beck Arnley
    Beck Arnley
  • Monroe

Best Selling Genuine Eagle Brake Pads

  • We Stock the following top leading brands, including Beck Arnley, Monroe
  • Constantly Updated Inventory of Eagle Replacement Brake Pads Parts

We stock Brake Pads parts for most Eagle models, including 2000 GTX, Summit, Talon, Vista.

Beck Arnley
1995 Eagle Summit Disc Brake Pad - Front Beck Arnley

P311-3A38076    082-1478  New

Beck Arnley Disc Brake Pad  Front
  • PREMIUM ORGANIC; Original Equipment Type Pad Material
Brand: Beck Arnley
Position: Front
Additional Fitment Information:
Vehicle Body Position
1995 - Eagle Summit Coupe Front
1993 Eagle Talon Disc Brake Pad - Front Monroe - Monroe Brakes Total Solution Semi-Metallic Brake Pads

P311-3F862A5    DX484  New

MR389540 , 5018942AA , 5016228AA , 5093021AA , MR389546 , MR205143 , MB950555 , MR389537 , MR569592 , MR569780 , 4882070 , 5012651AA , MR475244 , MR389580 , 5018945AA , 5019767AA , MR569403 , 5114424AA , 5083071AA , MZ690166 , MR493984 , MR389511 , MR569588 , MZ690001

Monroe Disc Brake Pad  Front
  • Hardware Kit Included
  • Monroe Brakes Total Solution Semi-Metallic Brake Pads
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Monroe
Position: Front
Additional Fitment Information:
Vehicle Drive Type Position
1993 - Eagle Talon FWD Front

Latest Eagle Repair and Brake Pads Installation Advice

CarJunky AutoAdvice

02 Ford Ranger, Right front wheel squeaking

Showing 3 out of 4 Posts | Show 1 Hidden Posts
Question From Shawn09 on 02 Ford Ranger, Right front wheel squeaking

2002 Ford Ranger
Single cab, 2WD, 3.0L
80,000 miles
15' Eagle Alloy Wheels, new in 2005

Hi, one of my right wheels (I think it's the right front) has been squeaking intermittently. It squeaks with the rotations of the wheel, so I hear it better at low speeds. It also makes the same squeak at the top of the travel of the brake pedal. In other words, just as I start to press the pedal it will squeak, but not when I firmly apply the brakes.

A year or so ago I slammed the right front wheel into a curb pretty hard and later the alignment shop told me it was 'out of round'. I since rotated the wheels and did it again with the new right front. Since the second time I hit a curb it has started squeaking.

What do you think could be causing this? The squeaking seems to be getting louder and more frequent. Thanks for your help!

Response From Hammer Time

Sounds like the warning sensors on the brake pads are hitting. You need to have the brakes inspected to determine for sure.

Response From Shawn09 Top Rated Answer

Sounds like the warning sensors on the brake pads are hitting. You need to have the brakes inspected to determine for sure.

Thanks for the reply! I don't think it's the brakes. It squeaks with each rotation of the wheel so something might be wrong with the bearings or something like that, from hitting that right front wheel twice.

Response From Hammer Time

OK great, you let us know what the problem was then.

1990 talon knocking at idle? Pre ignition maybe?

Showing 9 out of 23 Posts | Show 14 Hidden Posts
Question From Talonbooster12323 on 1990 talon knocking at idle? Pre ignition maybe?

after a head gasket replace on my 1990 eagle talon tsi fwd turbo I could only start the car by pumping the gas and it had a really bad idle now I let the car sit for a couple days and now when I start it ( still pumping the gas) I get really bad fast knocking and it get faster and worse if you rev it even just the slightest and even after u stop revving it it continues to knock rapidly for a few seconds then it goes back to the slower knock it has at idle, it idles really low. Here is a list of every aftermarket part on the vehicle:

List of mods: -Fully rebuilt#4G63T engine at 240000 kilometers (Everything in the engine replaced)
-ARP head studs kit
-Titanium valves and valve springs
-Balance shaft deleted
-Evo 3 exhaust manifold and Big 16G turbo, brand new at 240000 kilometers as well
-Exedy Stage 2 clutch kit
-HKS blow-off valve
-Walbro 255LPH fuel pump
-Spearco front mount intercooler with aluminum piping and Vibrant couplers
-Autometer Boost and Air/fuel ratio gauges in pillar pod
-Tanabe adjustable shocks with lowering springs
-Magnaflow muffler/Catalytic converter#deleted
-Polished 16 inch rims
-Powerslot rotors with Hawk brake pads
-Grant steering wheel
Koyo rad
-B&M shifter knob
Aftermarket turbo manifold
-Sony xplod hu
300 watt jl audio speaker amp
-Sony 10 inch sub in ported box
Two 15" mtx thunderpro 750 watt
-Bass inferno 1500Watts amplifier

I also have a video of the engine making the noise just not sure how to post it :s thanks in advance guys hopefully this forum has active users cause I've tried other sites and noone posts at all

Response From Discretesignals

You could post your video up on something like Youtube and post the link in here.

Response From Talonbooster12323

I don't have a YouTube account and I'm on dial up 60% of the time :'(

Response From Discretesignals

Have you checked the base timing on it?
What is the fuel pressure?
Have you tried disabling one cylinder at a time to see if the noise changes or goes away? It's also possible that you have a dead hole that you will find by disabling cylinders.

It's really hard to say what it could be without hearing the noise. You have any friends that have broadband?

Response From Talonbooster12323

thanks for the advice I will try everything you mentioned next time I have a chance to ( stupid work keeping me from my car haha) I will try and get the video up, anymore advice is still appreiecated as I will try it all in the next day or so.

Response From Tom Greenleaf

Just FYI: Links not generally allowed but if your car specific no problem. Try some free sites for pics if needed and just post the link. I'll try to convert it to a real pic for the post and I'm no geek at this crap.

Good luck. Been there with dial up and may again if the cable to house breaks in Winter. Works but slow,


Response From Talonbooster12323

I managed to get the video here's the link:

Response From Discretesignals

Great job posting that video. That will probably give you better results.

That doesn't sound too good at all. I don't believe that is spark knock. Sounds like a connecting rod/bearing. Or maybe a piston is smashing into something. Any damaged spark plugs?

Maybe others will respond to this thread and give their opinion.

Response From Talonbooster12323 Top Rated Answer

spark plugs are good and I tried rotating it by hand via the crankshaft with the valve cover off I couldn't really hear any noises but i was down by the wheel well turning so I'm gunna have to get someone to listen for me.

Response From Discretesignals

You might have to pull the oil pan and check for loose or extreme play in the big end of the rods. You probably won't be able to spin it fast enough by hand to cause the noise to occur. It's the change of direction of the rod/crank and a failed bearing that makes a noise similar to the one in your video.

Sometimes you can disable a cylinder one at a time. Rod noise will change pitch.

Response From Talonbooster12323

Okay I will try that when I can, how do you disable cylinders? I was reading about that earlier but didn't quite understand

Response From Discretesignals

If you can get access to the fuel injector connectors, you can pull a connector off one at a time with the engine running. Disabling an injector will kill that cylinder. If the pitch changes by disabling the injector, that might be the problem cylinder.

Response From Talonbooster12323

Okay so i had a day off so I changed some lifters and redid the timing and it still had the noise so I moved the cam shaft angle sensor thing and I could get it to idle decently with no knock but then when I try to rev it it will bog down and if I just hold the gas on the car dies. when it was knocking I could still rev it.

Response From Discretesignals

That is actually the crank angle sensor. You can adjust the timing with that. There is a connector that you have to ground out so you can adjust base timing using a timing light and a mark on the crank pulley while rotating the crank angle sensor. Pulling the timing back or retarding it will make the engine really sluggish and have low manifold vacuum. Advancing it will increase responsiveness, but can cause it to ping or detonate.

In the video that sounded like rod knock, but if that is detonation at idle I would be surprised. Maybe retarding the timing caused the knock to go away because the cylinder pressures where low enough to take the pounding off the rod bearings. If you have too much cylinder pressure from high compression or over advancement for some odd reason, retarding will also take pressure away if detonation is the source of that noise.

What you could do is connect up your timing light and with the engine running look at the mark and scale at the crank pulley and see what the ignition timing is at. If you have a timing light with an advance dial you can figure how much the ECM is advancing the timing if the mark is off the scale. Base timing is 5 degrees BTDC and when the ECM is controlling timing it will be advanced around 8 degrees BTDC. It will probably fluctuate when the ECM is in control.

If timing looks good and your not running some radical compression ratio or having high cylinder pressures in combustion chambers igniting fuel before the spark occurs, you probably looking at a mechanical problem.

Response From Talonbooster12323

Okay so today I started the car up and I noticed it was smoking from the o2 sensor so I replaced it with a spare when I took the sensor out it was all black on the end so I assumed it was bad I put in my spare but it's still smoking, could a bad o2 sensor be causing my problems? the spare I put in was from a 91 mine is a 90 do I need to buy a brand new specific sensor?

Response From Tom Greenleaf

2 cents worth: Check at any parts site to see if it's the same part #. Smoking?! IDK - any grease or penetrating oil used taking its time to burn off? Threads stripped?


Response From Talonbooster12323

there was no oil or grease or anything on either of them and when I went to take it out it was on there really tight so it couldn't had been just loose or something like that, I'm not sure what to do I don't want to go buy a brand new one and the same thing happen, especially if it has nothing to do with why the car is running like shit

Response From Talonbooster12323

Oh and I'm working on finding a timing light so I can do what you said to earlier

Response From Discretesignals

I don't think an O2 sensor is going to cause a knocking noise.

Response From Talonbooster12323

I've yet to get my hands on a timing light But went to check the ignition timing and noticed I didn't even have the lower timing belt cover with the marks on it so I'm guessing that the ignition is out of time if it doesn't even have the cover for it ( idiot that had it before me) I'm hoping this is my problem! Now to find a damn timing light :P

Response From Talonbooster12323

Okay cool I'll try that out tomorrow

Response From Talonbooster12323

oh sorry I wasn't aware that links Arnt aloud but it is specific to my car I took the video myself and just to keep you all updated I have made a YouTube account and I should have the video up tonight

Response From Tom Greenleaf

I know it's not clear at sign up but spammers and jerks try to advertise and the site runs on pennies from some ads paid for so links to outside interests just can't stand. Mods pay attention and we are doing well so far at keeping a free site and the lights are still on.