Finish Selecting Your Vehicle to Shop For Your Tail Pipe

Choose a Year for your Oldsmobile 's Tail Pipe

  • 1986
  • 1985
  • 1979
  • 1977
  • 1971
  • 1970
  • 1969
  • 1968
  • 1967
  • 1966
  • 1965

Shop By Brand

The Following brands are available based on your search.

  • Flowmaster
    Flowmaster
  • Walker Exhaust
    Walker Exhaust

Shop By Related Exhaust Tail Pipe Parts

Shop below for all Exhaust Tail Pipe related parts for your Oldsmobile


Shop for Top Selling Genuine Oldsmobile 442 Tail Pipes

  • We Stock the following top leading brands, including Flowmaster, Walker Exhaust
  • Constantly Updated Inventory of Oldsmobile 442 Replacement Tail Pipe Parts

Flowmaster
1966 Oldsmobile 442 Exhaust Tail Pipe 8 Cyl 6.6L Flowmaster - Tailpipe Set

P311-2C285B9    15802  New

Qty:
In Stock & Ready to Ship
$230.81
Flowmaster Exhaust Tail Pipe
  • Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required Use Offset Inlet/Offset Outlet Mufflers Only
  • Tailpipe Set; Single Side Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
  • Tailpipe Set
  • Product Attributes:
    • Automotive Item Grade: High Performance
    • Exhaust Pipe Wall Max Gauge: 16
    • Exit Position: Single Side
    • Fitment: Direct Oe Replacement
    • Inlet Diameter: 2.500 In.
    • Outlet Diameter: 2.500 In.
    • System Type: Tailpipe
    • Tubing Diameter: 2.500 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Mandrel Bent 16 Gauge Aluminized Tubing
    • Exits At Rear Of Vehicle
    • Aluminized Steel
    • Premium Flowmaster Quality
    • 3 Year Limited Warranty
  • These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 53058 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Flowmaster
Additional Fitment Information:
Vehicle Block Engine CID CC
1966 - Oldsmobile 442 V 8 Cyl 6.6L 400 6555
Flowmaster
Qty:
In Stock & Ready to Ship
$276.93
Flowmaster Exhaust Tail Pipe
  • Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required Use Offset Inlet/Offset Outlet Mufflers Only
  • Tailpipe Set; Dual Rear Exit; 2.5 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
  • Tailpipe Set
  • Product Attributes:
    • Automotive Item Grade: High Performance
    • Exit Position: Dual Rear
    • Fitment: Direct Oe Replacement
    • Inlet Diameter: 2.500 In.
    • Outlet Diameter: 2.500 In.
    • Overall Length: 65.250 In.
    • System Type: Tailpipe
    • Tubing Diameter: 2.500 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Mandrel Bent 16 Gauge Aluminized Tubing
    • Exits At Rear Of Vehicle
    • 3 Year Limited Warranty
    • Premium Flowmaster Quality
  • These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 942548 (Super 44 Series) or 942553 (50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Flowmaster
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1985 - Oldsmobile Cutlass Salon 442 V 8 Cyl 5.0L 307 -
Flowmaster
1966 Oldsmobile 442 Exhaust Tail Pipe 8 Cyl 6.6L Flowmaster - Tailpipe Set

P311-580B6D0    15819  New

Qty:
In Stock & Ready to Ship
$237.09
Flowmaster Exhaust Tail Pipe
  • Dual Rear Exit; 3.0 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
  • Tailpipe Set; Dual Rear Exit; 3.0 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
  • Tailpipe Set
  • Product Attributes:
    • Automotive Item Grade: High Performance
    • Exit Position: Dual Rear
    • Fitment: Direct Oe Replacement
    • Overall Length: 35.000 In.
    • System Type: Tailpipe
    • WARNING CA Proposition 65: No
  • Features:
    • Mandrel Bent 16 Gauge Aluminized Tubing
    • Exits At Rear Of Vehicle
    • Aluminized Steel
    • Premium Flowmaster Quality
    • 3 Year Limited Warranty
  • These Builder Series tailpipes are constructed from 3.00-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit behind the rear tire, similar to the stock tailpipes. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 943048 (Super 44 Series) or 53058 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper exhaust cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Flowmaster
Additional Fitment Information:
Vehicle Block Engine CID CC
1966 - Oldsmobile 442 V 8 Cyl 6.6L 400 6555
Flowmaster
1968 Oldsmobile 442 Exhaust Tail Pipe 8 Cyl 7.5L Flowmaster - Tailpipe Set

P311-3EA4D1C    15818  New

Qty:
In Stock & Ready to Ship
$281.31
Flowmaster Exhaust Tail Pipe
  • Dual Rear Exit; 3.0 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required
  • Tailpipe Set; Dual Rear Exit; 3.0 in. Diameter Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Offset Outlet Mufflers Required;
  • Tailpipe Set
  • Product Attributes:
    • Automotive Item Grade: High Performance
    • Exit Position: Dual Rear
    • Fitment: Direct Oe Replacement
    • System Type: Tailpipe
    • WARNING CA Proposition 65: No
  • Features:
    • Mandrel Bent 16 Gauge Aluminized Tubing
    • Exits At Rear Of Vehicle
    • Aluminized Steel
    • Premium Flowmaster Quality
    • 3 Year Limited Warranty
  • These Builder Series tailpipes are constructed from 3.00-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Opposite Side Outlet mufflers such as part# 943048 (Super 44 Series) or 53058 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Not designed to fit in factory bumper cutouts. Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Flowmaster
Additional Fitment Information:
Vehicle Block Engine CID CC
1968 - Oldsmobile 442 V 8 Cyl 7.5L 455 -
Walker Exhaust
Exhaust Tail Pipe Walker Exhaust

P311-2158EE9    52018  New

17604 , 548604

Qty:
In Stock & Ready to Ship
$18.97
Walker Exhaust Exhaust Tail Pipe
  • Exhaust Tail Pipe
  • Walker Exhaust 52018 Exhaust Tail Pipe
  • Product Attributes:
    • Grade Type: Regular
    • Inlet Inside Diameter: 2.25
    • Inlet Type: Pipe Connection
    • Outlet Type: Spout
  • Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Walker Exhaust
Additional Fitment Information:
Vehicle
Walker Exhaust
1977 Oldsmobile Cutlass Exhaust Tail Pipe 8 Cyl 5.7L Walker Exhaust - Walker Tail Pipe

P311-10533DB    46477  New

64592

Qty:
In Stock & Ready to Ship
Walker Exhaust Exhaust Tail Pipe
  • Exhaust Tail Pipe
  • Walker Exhaust 46477 Exhaust Tail Pipe
  • Walker Tail Pipe
  • Product Attributes:
    • Grade Type: Regular
    • Inlet Outside Diameter: 2
    • Inlet Type: Pipe Connection
    • Length: 58
    • Outlet Outside Diameter: 2
    • Outlet Type: Spout
  • Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Brand: Walker Exhaust
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1977 - Oldsmobile Cutlass 442 V 8 Cyl 5.7L 350 -