Shop Mercedes Benz Steering Shafts

Choose Vehicle Year

Finish Selecting Your Vehicle to Shop For Your Steering Shaft

Choose a Year for your Mercedes-Benz 's Steering Shaft

  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010
  • 2009
  • 2008
  • 2007
  • 2006
  • 2005
  • 2004
  • 2003
  • 2002
  • 2001
  • 2000

Shop By Brand

The Following brands are available based on your search.

  • Borgeson
    Borgeson
  • Flaming River
    Flaming River
  • Genuine
    Genuine
  • Holley
    Holley
  • Skyward
    Skyward

Best Selling Genuine Mercedes Benz Steering Shafts

  • We Stock the following top leading brands, including Genuine, Skyward , Borgeson, Holley, Flaming River
  • Constantly Updated Inventory of Mercedes Benz Replacement Steering Shaft Parts

We stock Steering Shaft parts for most Mercedes Benz models, including GL450, ML320, ML350, ML430, ML500.


Genuine
2006 Mercedes-Benz ML350 Steering Shaft Genuine

P311-1D9D30C    W0133-2312369  New

Qty:
In Stock & Ready to Ship
$292.88
Genuine Steering Shaft
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • NOTE: Please refer to DTB T-B-46.10/32g
Brand: Genuine
Additional Fitment Information:
Vehicle
2006 - Mercedes-Benz ML350
Skyward
2011 Mercedes-Benz GL350 Steering Shaft 6 Cyl 3.0L Skyward

P311-5106334    SK112013  New

1644600010 , A 164 460 00 10 0010 , A1644600010

Qty:
In Stock & Ready to Ship
$116.79
Skyward Steering Shaft
Brand: Skyward
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Mercedes-Benz GL350 V 6 Cyl 3.0L - 2987
Borgeson
Steering Shaft Borgeson

P311-20169F2    409208  New

FR1870-8

Qty:
In Stock & Ready to Ship
$44.68
Borgeson Steering Shaft
  • 2in. Spline Length
  • splined 2in. on each end.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • Diameter: .750
    • End 1 Type: 3/4 In. 36-spline
    • End 2 Type: 3/4 In. 36-spline
    • Finish: Natural Steel
    • Length: 8.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 409208 - Steel Splined Steering Shaft. 3/4 In. Diameter With 36 Splines. 8 In. Long, Splined 2 In. On Each End.
    • Universal Joints Included: No
  • Features:
    • Splines provide the safest and strongest transmission of rotational force. Available in 2" increments. Steel shafts can be trimmed up to 1" of each end to achieve desired length. Made in the USA.
  • Borgeson steel splined steering shafts have a 3/4"-36 spline. Steel shafts have 2" of spline on each end and are available in 2" increments from 2"-36". These can easily be trimmed up to 1" off each end for a precise fit.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-3C00535    409036  New

Qty:
In Stock & Ready to Ship
$40.59
Borgeson Steering Shaft
  • 1 End Only
  • splined 1 end only.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • Diameter: .750
    • End 1 Type: 3/4 In. 36-spline
    • End 2 Type: 3/4 In. Without Splines
    • Finish: Natural Steel
    • Length: 36.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 409036 - Steel Splined Steering Shaft. 3/4 In. Diameter With 36 Splines. 36 In. Long, Splined 1 End Only.
    • Universal Joints Included: No
  • Features:
    • Splines provide the safest and strongest transmission of rotational force. Splined 1" on one end only. Can be trimmed to needed length. Made in the USA.
  • Borgeson steel splined steering shafts have a 3/4"-36 spline. Steel shafts have 2" of spline on each end and are available in 2" increments from 2"-36". These can easily be trimmed up to 1" off each end for a precise fit.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-107B467    409212  New

FR1870-12

Qty:
In Stock & Ready to Ship
$44.68
Borgeson Steering Shaft
  • 2in. Spline Length
  • splined 2in. on each end.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • Diameter: .750
    • End 1 Type: 3/4 In. 36-spline
    • End 2 Type: 3/4 In. 36-spline
    • Finish: Natural Steel
    • Length: 12.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 409212 - Steel Splined Steering Shaft. 3/4 In. Diameter With 36 Splines. 12 In. Long, Splined 2 In. On Each End.
    • Universal Joints Included: No
  • Features:
    • Splines provide the safest and strongest transmission of rotational force. Available in 2" increments. Steel shafts can be trimmed up to 1" of each end to achieve desired length. Made in the USA.
  • Borgeson steel splined steering shafts have a 3/4"-36 spline. Steel shafts have 2" of spline on each end and are available in 2" increments from 2"-36". These can easily be trimmed up to 1" off each end for a precise fit.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-0E9B491    429436  New

FR1851SSPL

Qty:
In Stock & Ready to Ship
$133.13
Borgeson Steering Shaft
  • 36in. Long
  • 36in. long.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Polished Stainless Steel
    • Diameter: .750
    • End 1 Type: 3/4 In. Dd
    • End 2 Type: 3/4 In. Dd
    • Finish: Polished Stainless Steel
    • Length: 36.00
    • Material: Stainless Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 429436 - Polished Stainless Steel Double-d Steering Shaft. 3/4 In. Double-d Full Length Of Shaft, 36 In. Long.
    • Universal Joints Included: No
  • Features:
    • Shaft is double D for the entire length. Corrosion free polished stainless steel. Easily trimmed to any length. The DD profile provides a safe strong method to transmit the rotational force of a steering system. Made in the USA.
  • Borgeson Double-D steering shafts are available in steel, stainless steel and polished stainless. The advantage to Double-D shaft is the flexibility it offers. With Double-D steering shaft it is not necessary to know your exact shaft lengths. Double-D shaft is sold in 18", 22" or 36" lengths and can be easily trimmed to any length. Universal joint phasing is also fixed with DD shaft and cannot be altered.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-356D718    409536  New

Qty:
In Stock & Ready to Ship
$56.13
Borgeson Steering Shaft
  • 36in. Long
  • 36in. long.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • Diameter: 1.00
    • End 1 Type: 1 In. Dd
    • End 2 Type: 1 In. Dd
    • Finish: Natural Steel
    • Length: 36.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 409536 - Steel Double-d Steering Shaft. 1 In. Double-d Full Length Of Shaft, 36 In. Long.
    • Universal Joints Included: No
  • Features:
    • Shaft is double D for the entire length. Easily trimmed to any length. The DD profile provides a safe strong method to transmit the rotational force of a steering system. Made in the USA.
  • Borgeson 1" Double-D steering shaft tubing is available in steel only. The advantage to Double-D shaft is the flexibility it offers. This is the standard 1"DD tubing used on many General Motors vehicles.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-0E213AE    450036  New

Qty:
In Stock & Ready to Ship
$98.53
Borgeson Steering Shaft
  • 36in. Extended Length
  • Steel telescopic steering shaft. 36in. Extended length with 3/4in. Double-D and 1in. Double-D ends.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • Diameter: 1.00
    • End 1 Type: 1.00 In Double D
    • End 2 Type: .750 In Double D
    • Finish: Natural Steel
    • Length: 39.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 450036 - Steel Telescopic Steering Shaft. 36 In. Extended Length With 3/4 In. Double-d And 1 In. Double-d Ends.
  • Features:
    • Telescopic, can be trimmed up to 10". 1"DD and 3/4"DD construction. Includes protective boot. Internal torsion spring for shaft tension. Made in the USA.
  • Borgeson offers telescoping shaft assemblies in 24" and 36" overall lengths. These shafts can be used in a variety of applications and make installation and removal of steering system components simple and easy. The telescopic action also acts as a collapsible shaft offering an added measure of safety. One end of the assembly is a 3/4"DD shaft and the other end is a 1"DD tube. The assembly can be trimmed to fit shorter applications. Telescoping shafts are available in steel only.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-0900E31    460018  New

Qty:
In Stock & Ready to Ship
$80.90
Borgeson Steering Shaft
  • 18-1/2in. Long
  • Steel collapsible steering shaft. 18-1/2in. Length with 3/4in. Double-D and 1in. Double-D ends.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • Diameter: 1.00
    • End 1 Type: 1.00 Double D
    • End 2 Type: .750 Double D
    • Finish: Natural Steel
    • Length: 18.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 460018 - Steel Collapsible Steering Shaft. 18-1/2 In. Length With 3/4 In. Double-d And 1 In. Double-d Ends.
  • Features:
    • Fixed length collapsible, can be trimmed. 1"DD and 3/4"DD construction. Includes protective boot. Internal torsion spring for shaft tension. Made in the USA.
  • Borgeson collapsible steering shaft assemblies are 18-1/2" in length. The collapsible shaft offers an added measure of safety. One end of the assembly is a 3/4"DD shaft and the other end is a 1"DD tube. The assembly can be trimmed to fit shorter applications. Collapsible shafts are available in steel only.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-593F867    409206  New

FR1870-6

Qty:
In Stock & Ready to Ship
$44.68
Borgeson Steering Shaft
  • 2in. Spline Length
  • splined 2in. on each end.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • Diameter: .750
    • End 1 Type: 3/4 In. 36-spline
    • End 2 Type: 3/4 In. 36-spline
    • Finish: Natural Steel
    • Length: 6.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 409206 - Steel Splined Steering Shaft. 3/4 In. Diameter With 36 Splines. 6 In. Long, Splined 2 In. On Each End.
    • Universal Joints Included: No
  • Features:
    • Splines provide the safest and strongest transmission of rotational force. Available in 2" increments. Steel shafts can be trimmed up to 1" of each end to achieve desired length. Made in the USA.
  • Borgeson steel splined steering shafts have a 3/4"-36 spline. Steel shafts have 2" of spline on each end and are available in 2" increments from 2"-36". These can easily be trimmed up to 1" off each end for a precise fit.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-4C7093C    409436  New

FR1851

Qty:
In Stock & Ready to Ship
$46.39
Borgeson Steering Shaft
  • 36in. Long
  • 36in. long.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • Diameter: .750
    • End 1 Type: 3/4 In. Dd
    • End 2 Type: 3/4 In. Dd
    • Finish: Natural Steel
    • Length: 36.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 409436 - Steel Double-d Steering Shaft. 3/4 In. Double-d Full Length Of Shaft, 36 In. Long.
    • Universal Joints Included: No
  • Features:
    • Shaft is double D for the entire length. Easily trimmed to any length. The DD profile provides a safe strong method to transmit the rotational force of a steering system. Made in the USA.
  • Borgeson Double-D steering shafts are available in steel, stainless steel and polished stainless. The advantage to Double-D shaft is the flexibility it offers. With Double-D steering shaft it is not necessary to know your exact shaft lengths. Double-D shaft is sold in 18", 22" or 36" lengths and can be easily trimmed to any length. Universal joint phasing is also fixed with DD shaft and cannot be altered.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-3E95CB5    409216  New

FR1870-16

Qty:
In Stock & Ready to Ship
$44.68
Borgeson Steering Shaft
  • 2in. Spline Length
  • splined 2in. on each end.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • Diameter: .750
    • End 1 Type: 3/4 In. 36-spline
    • End 2 Type: 3/4 In. 36-spline
    • Finish: Natural Steel
    • Length: 16.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 409216 - Steel Splined Steering Shaft. 3/4 In. Diameter With 36 Splines. 16 In. Long, Splined 2 In. On Each End.
    • Universal Joints Included: No
  • Features:
    • Splines provide the safest and strongest transmission of rotational force. Available in 2" increments. Steel shafts can be trimmed up to 1" of each end to achieve desired length. Made in the USA.
  • Borgeson steel splined steering shafts have a 3/4"-36 spline. Steel shafts have 2" of spline on each end and are available in 2" increments from 2"-36". These can easily be trimmed up to 1" off each end for a precise fit.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-3BE503C    450024  New

Qty:
In Stock & Ready to Ship
$98.53
Borgeson Steering Shaft
  • 24in. Extended Length
  • Steel telescopic steering shaft. 24in. Extended length with 3/4in. Double-D and 1in. Double-D ends.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • End 1 Type: 1.00 In Double D
    • End 2 Type: .750 In Double D
    • Finish: Natural Steel
    • Length: 27.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 450024 - Steel Telescopic Steering Shaft. 24 In. Extended Length With 3/4 In. Double-d And 1 In. Double-d Ends.
  • Features:
    • Telescopic, can be trimmed up to 10". 1"DD and 3/4"DD construction. Includes protective boot. Internal torsion spring for shaft tension. Made in the USA.
  • Borgeson offers telescoping shaft assemblies in 24" and 36" overall lengths. These shafts can be used in a variety of applications and make installation and removal of steering system components simple and easy. The telescopic action also acts as a collapsible shaft offering an added measure of safety. One end of the assembly is a 3/4"DD shaft and the other end is a 1"DD tube. The assembly can be trimmed to fit shorter applications. Telescoping shafts are available in steel only.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-176B242    419436  New

FR1851SS

Qty:
In Stock & Ready to Ship
$81.34
Borgeson Steering Shaft
  • 36in. Long
  • 36in. long.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Stainless Steel
    • Diameter: .750
    • End 1 Type: 3/4 In. Dd
    • End 2 Type: 3/4 In. Dd
    • Finish: Natural Stainless Steel
    • Length: 36.00
    • Material: Stainless Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 419436 - Stainless Steel Double-d Steering Shaft. 3/4 In. Double-d Full Length Of Shaft, 36 In. Long.
    • Universal Joints Included: No
  • Features:
    • Shaft is double D for the entire length. Corrosion free stainless steel. Easily trimmed to any length. The DD profile provides a safe strong method to transmit the rotational force of a steering system. Made in the USA.
  • Borgeson Double-D steering shafts are available in steel, stainless steel and polished stainless. The advantage to Double-D shaft is the flexibility it offers. With Double-D steering shaft it is not necessary to know your exact shaft lengths. Double-D shaft is sold in 18", 22" or 36" lengths and can be easily trimmed to any length. Universal joint phasing is also fixed with DD shaft and cannot be altered.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Holley
Steering Shaft Holley

P311-30ACB93    320-200  New

Qty:
In Stock & Ready to Ship
$59.43
Holley Steering Shaft
  • Universal Steering Shaft
  • Universal Steering Shaft; 1 in.; For Use w/DD Style Steering U Joints/Couplers/Rag Joints; Mild Steel w/Black Zinc Finish;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Universal DD Style Steering Shaft
    • Ideal For Custom Steering Shafts
    • Can Be Used With Round Support Bearings - Where Needed
  • Double D or DD steering shafts are easy to assemble and cut to length where needed. Mild steel construction with black zinc finish to resist corrosion. Choose from 3/4-inch or 1-inch size shafts. Use with DD-style steering U-joints and rag joints.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Steering Shaft Holley

P311-21AE55F    320-201  New

Qty:
In Stock & Ready to Ship
$57.94
Holley Steering Shaft
  • Universal Steering Shaft
  • Universal Steering Shaft; 0.75 in.; For Use w/DD Style Steering U Joints/Couplers/Rag Joints; Mild Steel w/Black Zinc Finish;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Universal DD Style Steering Shaft
    • Ideal For Custom Steering Shafts
    • Can Be Used With Round Support Bearings - Where Needed
  • Double D or DD steering shafts are easy to assemble and cut to length where needed. Mild steel construction with black zinc finish to resist corrosion. Choose from 3/4-inch or 1-inch size shafts. Use with DD-style steering U-joints and rag joints.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Flaming River
Steering Shaft Flaming River

P311-266E8CE    FR1850  New

Qty:
In Stock & Ready to Ship
$104.66
Flaming River Steering Shaft
  • Shaft: 18 3/4 DD
  • Shaft: 18 3/4 DD
  • Product Attributes:
    • Bar CodePart No.: Fr1850
  • 18" steel shaft (3/4" DD both ends).

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-345F63A    409418  New

FR1850

Qty:
In Stock & Ready to Ship
$42.50
Borgeson Steering Shaft
  • 18in. Long
  • 18in. long.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Natural Steel
    • Diameter: .750
    • End 1 Type: 3/4 In. Dd
    • End 2 Type: 3/4 In. Dd
    • Finish: Natural Steel
    • Length: 18.00
    • Material: Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 409418 - Steel Double-d Steering Shaft. 3/4 In. Double-d Full Length Of Shaft, 18 In. Long.
    • Universal Joints Included: No
  • Features:
    • Shaft is double D for the entire length. Easily trimmed to any length. The DD profile provides a safe strong method to transmit the rotational force of a steering system. Made in the USA.
  • Borgeson Double-D steering shafts are available in steel, stainless steel and polished stainless. The advantage to Double-D shaft is the flexibility it offers. With Double-D steering shaft it is not necessary to know your exact shaft lengths. Double-D shaft is sold in 18", 22" or 36" lengths and can be easily trimmed to any length. Universal joint phasing is also fixed with DD shaft and cannot be altered.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle
Borgeson
Steering Shaft Borgeson

P311-31C5FCC    429422  New

FR1850-22SSPL

Qty:
In Stock & Ready to Ship
$106.18
Borgeson Steering Shaft
  • 22in. Long
  • 22in. long.
  • Product Attributes:
    • CA Prop 65 Required: Y
    • Color: Polished Stainless Steel
    • Diameter: .750
    • End 1 Type: 3/4 In. Dd
    • End 2 Type: 3/4 In. Dd
    • Finish: Polished Stainless Steel
    • Length: 22.00
    • Material: Stainless Steel
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chemicals Including Nickel And Chromium (hexavalent Compounds), Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Visit: Www.p65warnings.ca.
    • Title: Borgeson - Steering Shaft - P/n: 429422 - Polished Stainless Steel Double-d Steering Shaft. 3/4 In. Double-d Full Length Of Shaft, 22 In. Long.
    • Universal Joints Included: No
  • Features:
    • Shaft is double D for the entire length. Corrosion free polished stainless steel. Easily trimmed to any length. The DD profile provides a safe strong method to transmit the rotational force of a steering system. Made in the USA.
  • Borgeson Double-D steering shafts are available in steel, stainless steel and polished stainless. The advantage to Double-D shaft is the flexibility it offers. With Double-D steering shaft it is not necessary to know your exact shaft lengths. Double-D shaft is sold in 18", 22" or 36" lengths and can be easily trimmed to any length. Universal joint phasing is also fixed with DD shaft and cannot be altered.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Borgeson
Additional Fitment Information:
Vehicle