Finish Selecting Your Vehicle to Shop For Your Spark Plug Wires

Choose a Year for your Land Rover 's Spark Plug Wires

  • 2008
  • 2007
  • 2006
  • 2005
  • 2004
  • 2003
  • 2002
  • 2001
  • 2000
  • 1999
  • 1998
  • 1997
  • 1996
  • 1995
  • 1994
  • 1993
  • 1992
  • 1991
  • 1990
  • 1989
  • 1988
  • 1987
  • 1974
  • 1973
  • 1972
  • 1971
  • 1970
  • 1969
  • 1968
  • 1967
  • 1966
  • 1965
  • 1964
  • 1963
  • 1962
  • 1961
  • 1960
  • 1959
  • 1958
Show More Years

Shop By Brand

The Following brands are available based on your search.

  • Beck Arnley
    Beck Arnley
  • Eurospare
    Eurospare
  • IMC
    IMC
  • Karlyn
    Karlyn
  • Standard Wires
    Standard Wires

Best Selling Genuine Rover Spark Plug Wires

  • We Stock the following top leading brands, including Eurospare, Karlyn, Standard Wires, Beck Arnley
  • Constantly Updated Inventory of Rover Replacement Spark Plug Wires Parts

We stock Spark Plug Wires parts for most Rover models, including Freelander, LR3, Range Rover.

Eurospare
1997 Land Rover Defender 90 Spark Plug Wire Set Eurospare

P311-12B0CA2    W0133-1621327  New

Qty:
$49.45
Eurospare Spark Plug Wire Set
  • - W/ distributor-less ignition -
Brand: Eurospare
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
1997 - Land Rover Defender 90
Eurospare
1998 Land Rover Range Rover Spark Plug Wire Set Eurospare

P311-12B0CA2    W0133-1621327  New

Qty:
$49.45
Eurospare Spark Plug Wire Set
  • Chas: -WA403777
  • - W/ distributor-less ignition -
Brand: Eurospare
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
1998 - Land Rover Range Rover
Eurospare
1999 Land Rover Discovery Spark Plug Wire Set Eurospare

P311-0AE8144    W0133-1895006  New

Qty:
$88.76
Eurospare Spark Plug Wire Set
  • OE Cables and Boots
Brand: Eurospare
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle
1999 - Land Rover Discovery
Eurospare
1998 Land Rover Range Rover Spark Plug Wire Set Eurospare

P311-0AE8144    W0133-1895006  New

Qty:
$88.76
Eurospare Spark Plug Wire Set
  • Chas: WA403778-
  • OE Cables and Boots
Brand: Eurospare
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle
1998 - Land Rover Range Rover
Karlyn
2002 Land Rover Freelander Spark Plug Wire Set Karlyn

P311-5E6BFA0    W0133-1651825  New

Qty:
$114.32
Karlyn Spark Plug Wire Set
  • 3 Wire Set 3 Wire Set
  • - 3 Wire Set
Brand: Karlyn
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle
2002 - Land Rover Freelander
Eurospare
1994 Land Rover Defender 90 Spark Plug Wire Set Eurospare

P311-0E2CF93    W0133-1624006  New

Qty:
$46.44
Eurospare Spark Plug Wire Set
Brand: Eurospare
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
1994 - Land Rover Defender 90
Eurospare
1994 Land Rover Defender 90 Spark Plug Wire Set Eurospare

P311-0E2CF93    W0133-1624006  New

Qty:
$50.56
Eurospare Spark Plug Wire Set
  • Not as OE Wire length and plug connectors are slighly different than OE This wire set fits models with distributors Will not fit models with "DIS" (distributorless ignition systems)
  • - MFG in UK
Brand: Eurospare
This Product is Eligible for Free Ground Shipping
Additional Fitment Information:
Vehicle
1994 - Land Rover Defender 90
Standard Wires
2001 Land Rover Range Rover Spark Plug Wire Set 8 Cyl 4.6L Standard Wires

P311-5CA95DC    27883  New

Qty:
$24.68
Standard Wires Spark Plug Wire Set
  • Pro Series
  • Spark Plug Wire Set - STD
Brand: Standard Wires
Additional Fitment Information:
Vehicle Block CC CID
2001 - Land Rover Range Rover V 4554 278
Beck Arnley
2002 Land Rover Freelander Spark Plug Wire Set 6 Cyl 2.5L Beck Arnley

P311-5767B5D    175-6197  New

Qty:
$66.05
Beck Arnley Spark Plug Wire Set
  • PREMIUM
Brand: Beck Arnley
Additional Fitment Information:
Vehicle Block CC CID
2002 - Land Rover Freelander V 2500 153
Standard Wires
1997 Land Rover Discovery Spark Plug Wire Set 8 Cyl 4.0L Standard Wires

P311-5E724A6    27879  New

Qty:
$21.83
Standard Wires Spark Plug Wire Set
  • Pro Series
  • Spark Plug Wire Set - STD
Brand: Standard Wires
Additional Fitment Information:
Vehicle Block CC CID
1997 - Land Rover Discovery V 3950 -
Standard Wires
1999 Land Rover Discovery Spark Plug Wire Set 8 Cyl 4.0L Standard Wires

P311-5E724A6    27879  New

Qty:
$21.83
Standard Wires Spark Plug Wire Set
  • Distributorless Ignition Pro Series
  • Spark Plug Wire Set - STD
Brand: Standard Wires
Additional Fitment Information:
Vehicle Block CC CID
1999 - Land Rover Discovery V 3950 -
Beck Arnley
1993 Land Rover Range Rover Spark Plug Wire Set 8 Cyl 4.2L Beck Arnley

P311-2850AB7    175-6008  New

Qty:
$22.78
Beck Arnley Spark Plug Wire Set
  • PREMIUM DIAMETER MM 7mm WIRE COLOR Black CONDUCTOR TYPE Mag Core 500 ohm/ft JACKET MATERIAL Silicone
Brand: Beck Arnley
Additional Fitment Information:
Vehicle Block CC CID
1993 - Land Rover Range Rover V 4200 -
Standard Wires
2001 Land Rover Range Rover Spark Plug Wire Set 8 Cyl 4.6L Standard Wires

P311-055D783    55409  New

Qty:
$42.99
Standard Wires Spark Plug Wire Set
  • Genuine Intermotor Quality
  • Spark Plug Wire Set - STD
Brand: Standard Wires
Additional Fitment Information:
Vehicle Block CC CID
2001 - Land Rover Range Rover V 4554 278
Standard Wires
1960 Land Rover Land Rover Spark Plug Wire Set 4 Cyl 2.1L Standard Wires

P311-0CE7E1D    23400  New

Qty:
$12.26
Standard Wires Spark Plug Wire Set
  • Universal Wire Set Pro Series
  • Spark Plug Wire Set - STD
Brand: Standard Wires
Additional Fitment Information:
Vehicle Block CC CID
1960 - Land Rover Land Rover L 2052 125
Standard Wires
1995 Land Rover Discovery Spark Plug Wire Set 8 Cyl 3.9L Standard Wires

P311-08B7016    27878  New

Qty:
$23.93
Standard Wires Spark Plug Wire Set
  • Pro Series
  • Spark Plug Wire Set - STD
Brand: Standard Wires
Additional Fitment Information:
Vehicle Block CC CID
1995 - Land Rover Discovery V 3950 -
Beck Arnley
1997 Land Rover Range Rover Spark Plug Wire Set 8 Cyl 4.0L Beck Arnley

P311-5F4DBA2    175-6194  New

Qty:
$26.09
Beck Arnley Spark Plug Wire Set
  • PREMIUM DIAMETER MM 7mm WIRE COLOR Black CONDUCTOR TYPE Mag Core 500 ohm/ft JACKET MATERIAL Silicone
Brand: Beck Arnley
Additional Fitment Information:
Vehicle Block CC CID
1997 - Land Rover Range Rover V 3950 -
Beck Arnley
2005 Land Rover LR3 Spark Plug Wire Set 6 Cyl 4.0L Beck Arnley

P311-577C038    175-6231  New

Qty:
$44.18
Beck Arnley Spark Plug Wire Set
  • PREMIUM
Brand: Beck Arnley
Additional Fitment Information:
Vehicle Block CC CID Engine VIN
2005 - Land Rover LR3 V 4009 245 4
Standard Wires
1960 Land Rover Land Rover Spark Plug Wire Set 4 Cyl 2.1L Standard Wires

P311-3B3C612    3400  New

Qty:
$17.13
Standard Wires Spark Plug Wire Set
  • Universal Wire Set OE Performance Plus
  • Spark Plug Wire Set - STD
Brand: Standard Wires
Additional Fitment Information:
Vehicle Block CC CID
1960 - Land Rover Land Rover L 2052 125
Standard Wires
1997 Land Rover Discovery Spark Plug Wire Set 8 Cyl 4.0L Standard Wires

P311-0FC242F    55456  New

Qty:
$36.76
Standard Wires Spark Plug Wire Set
  • Genuine Intermotor Quality
  • Spark Plug Wire Set - STD
Brand: Standard Wires
Additional Fitment Information:
Vehicle Block CC CID
1997 - Land Rover Discovery V 3950 -
Standard Wires
1999 Land Rover Discovery Spark Plug Wire Set 8 Cyl 4.0L Standard Wires

P311-0FC242F    55456  New

Qty:
$36.76
Standard Wires Spark Plug Wire Set
  • Distributorless Ignition Genuine Intermotor Quality
  • Spark Plug Wire Set - STD
Brand: Standard Wires
Additional Fitment Information:
Vehicle Block CC CID
1999 - Land Rover Discovery V 3950 -

Latest Rover Repair and Spark Plug Wires Installation Advice

CarJunky AutoAdvice

99 Neon several misfire codes

Showing 2 out of 19 Posts | Show 17 Hidden Posts
Question From Mike99 on 99 Neon several misfire codes

1999 Neon with 2.0 sohc engine. Has p0300, p0301, p0302, p0303 codes and I have my own scanner so I know they are all misfire codes. I have replaced coil, spark plugs, wires, cam sensor, and knock sensor on this vehicle not that long ago (less than 3000 miles). Every so often the codes come back, like today when I erased them. The engine doesn't hesitate, doesn't smoke, doesn't burn oil, doesn't have a mis at any point of drivng it or letting it idle. It does start up hard (cranks more than usuall) when it's cold. I'm getting ready to pull the plugs out again to see if there's anything going on with them. It still gets 26 mpg, so any thoughts? My daughter drives the car daily and I'm working on another one for her, but I need this one to stay running till I get it done. Yes this one has been a pain since day one of buying it over 2 years ago. The last time it acted like this it ended up stahling, not starting back up and I found the bottom of the coil to be cracked, if this is the case again, what could be causing that to happen? Any idea's of why this is a reoccuring problem would be appreciated.

Response From Loren Champlain Sr

Mike; You've hit on most everything. No other codes? What about injectors? A poor spray pattern or plugged injectors can cause misfires. If you haven't had it done, you may want to have the injectors cleaned. If you have an ohmmeter, you can check each injectors' resistance to ensure that they are okay, electrically. Injector cleaning should be done about every 40K miles, and is done with a machine (MotorVac). Not the snake oil that you put in the gas.
Just a thought.

Response From Mike99

Thanks Steve and Loren. I'm going to check the coil again. The plug wires were replaced in March with everything else I listed. With the coil getting cracked before, it was the molded plastic underneath, not the outer plastic that mounts it. There aren't and haven't ever been anyother codes. 6 months before the last "tune up" in March, I replaced everything while I was replacing the water pump that decided to leak so I did timing belt, tensioner, and everything else (coil, spark plug wires, spark plugs). So basicly there's been a tune up done 2 times with in a year. Haven't checked the injectors yet seeing as I don't have a gas smell, the engine running rough, fuel out the exaughst, or fuel in the oil. Like I said it doesn't run rough now and has excellent pick up when punching it going down the road. Did that 15 minutes before I posted on here. But I'm gonna check the injectors when I get a chance.

If the coil is cracked (again), could there be a ground wire unhooked somewhere that could be causing a problem? Only need this one to last till some snow melts so I can put exaughst on the other neon (which was supposed to be my beater) so it can go get inspected. Lucky me if I need some parts, I have a spare.

Response From Loren Champlain Sr

Mike; Have you cleared the original trouble codes? And, still getting the same codes, even though it doesn't run rough?

Response From Mike99

Yep, cleared them with my scanner. The codes don't come back right away, atleast it seems like that. I cleared them today, took it down the road, drove the car like I was 18 again (lol) and the codes haven't shown themselves again. My daughter has to take it tomarrow to do finals (65 miles round trip) so I'm going to play with it some more when she gets back home. The only way I knew the check engine light was on is because she was complaining about another noise that I've narrowed down and doesn't have anything to do with the engine. So I saw the light and went investigating. I've asked her questions about it several times tonight just because she's complained about it before and I'd take the car for weeks at a time without ever hearing or running into what she said the car was doing. Just like the last time when the coil was cracked, she complained about the car stahling, I had it for a month no problems. Drove it everyday to work or whereever I was going, it didn't have a problem till I went to go get parts for my truck (after I called her and told her that I couldn't find anything wrong), it stahled and wouldn't restart. That's why I'm baffled with what could be setting these codes off. Tomarrow after she gets home and the car cools off, I plan on taking out the plugs and checking them, as I do them I'm going to do a compression test on each cylinder and I'm going to inspect the coil.

Response From steve01832

Mike, if the codes do come back, before you clear them, can you retrieve and post the freeze frame data for all codes for us?

Steve

Response From Mike99

I have a TP-300CAN scanner. It just does the code and allows you to clear them. The only other info it gives is with the monitor which gives mm, fs, cc, cm, hc, es, sa, ac, os, oh, and egr. I don't have any freeze frames or atleast what I believe your trying to ask for would be the freeze frame of how the engine is running like you would get with the more expensive scanners. I'd like one but way outa my price range for what I do anymore.

Response From Loren Champlain Sr

The problem with 'scanners' is that most people think that when the 'scanner' gives them a code for, let's say an oxygen sensor, they believe that it is the sensor that is the problem. All the scanner is telling you is that the PCM has detected a problem with that circuit. Misfire codes are the same. It doesn't tell you if its a primary or secondary, or fuel problem. It is just telling you that that particular cylinder misfired. Even the professional type scanners aren't a crystal ball. Some have troubleshooting capabilities, but none will come up and tell you to "replace the differential pushrod in the carburetor". (that's a joke). I hate seeing people wasting thier hard earned money on these 'toys'. The scanners that we use cost thousands and must be updated each year at a cost of over 1000.00, not to mention the software updates that have the wiring diagrams and flow charts for researching the particular trouble code. That software is over 2500.00 per year. I don't mean to sound negative, but it really is more involving than most people realize.

Response From Mike99

Loren I know what your talkn about with the scanner, we use to use a snapon one that was $10,000 new and the upgrades were several thousand to boot. Those are the nice ones. They let you know how the engine is running and get the important information to quickly diagnois the problem.

Response From Loren Champlain Sr

Well, I don't know about 'quickly', but it definitely helps. Obviously, you know the difference. Wasn't sure. A lot of the folks that post think that it is a quick, easy test. Have a great week.

Response From Mike99

Well by quickly I mean it's faster than the old way of checking everything lol. I do have another computer laying around here for it somewhere. I don't know about a having a great week, I feel a very bad headache coming on, but thanks for the info and you have one too.

Response From Loren Champlain Sr

http://autoforums.carjunky.com/images/toolbar/cut.gifMike; Capt. Morgan's Spiced Rum is very good for headaches.

Response From steve01832

Mike, before you replace the PCM, call your local dealer and see if the reflash update may solve the problem.

Steve

Response From steve01832

Sometimes you can rent them from taylor rental or maybe even Auto Zone may lend one that can read the datastream. I would like to see freeze frame data when these codes set. Let me check TSB's for this vehicle, it could be something simple like a software update for the PCM.

Steve

Response From steve01832

I found the TSB. The # = 18-47-98. It was dated 12/18/1998. I can't upload the document because it is not in the correct format for this site. If you google the number you should be able to get it to read. Basically, if you have invalid misfire codes, the PCM is faulty.

Steve

Response From Hammer Time



Here ya go

Response From steve01832

That's what I wanted to post. You're the man brother!

Steve

Response From Mike99 Top Rated Answer

I use mine (it was relatively cheap) to give me some ideas of what is wrong. Its just like with my sebring jxi. It would shut off when slowing down to stop or going around a corner and it wouldn't do it all the time. I wouldn't get the check engine light on either but I checked it anyways and found that there was a voltage problem with the MAF sensor. I checked the wiring out, replaced the sensor and haven't had a problem since. As far as Advance Auto, half those guys in there have less auto experience than my son. Go there and tell them you want an old ford starter solenoid to use on your snow plow and they'll look at you stupid (I've done it). I've been doing it for 20 years, worked at the little garages and a land rover dealer and left since I didn't feel like dealing with the newer vehicles on a daily basis just because they can become a headache with the same problem being caused by multiple things or even something that would be very rare. I now work on contruction machinery, diesels are so much nicer LOL. But I basicly jusst use the scanner to get me in some type of direction (since it has limited use) and go from there. Just like when the coil went bad in March, the scanner didn't work for me at all, just gave me the misfire codes so then I had to trouble shoot everything else before I just felt like checking the coil. That was a week later with lots of time spent on the car. I was pissed that it was something that stupid.

With the engine at that time not wanting to run, if you go by the book, they have you checking knock, cam and other sensors that allow the ecm to send the juice to the coil. You even check the plug at the coil. So right there is alot of time when it comes down to being the coil.

Response From steve01832

Hi. I would inspect the coil again to see if it is cracked. If it is, overtightening the bolts could cause it. Believe it or not, faulty plug wires can do it too. I have also uploaded additional info. if the coil proves good.

Steve