Shop International Hx620 Shock Absorbers

Choose Vehicle Year

Finish Selecting Your Vehicle to Shop For Your Shock Absorber

Choose a Year for your International HX620 's Shock Absorber

  • 2019
  • 2018
  • 2017

Shop By Brand

The Following brands are available based on your search.

  • Bilstein
    Bilstein
  • Fox Racing Shox
    Fox Racing Shox
  • Monroe
    Monroe
  • PRT
    PRT
  • Qa1
    Qa1

Shop By Related Shock Absorber Parts

Shop below for all Shock Absorber related parts for your International HX620

Shock Absorber
Shock Absorber

Shop for Top Selling Genuine International Hx620 Shock Absorbers

  • We Stock the following top leading brands, including Monroe, Bilstein
  • Constantly Updated Inventory of International Hx620 Replacement Shock Absorber Parts

We also have Shock Absorber parts for other International models, including AB140, C100, C1000, C102, C110, C1100, C112, C120, C1200, C122, C130, C1300, C132, C900, CO190, CO200, CO220, CXT, F1924, F1954, F2275, F2554, F2574, F2575, F2654, F2674, F5070, F5070SF, HV507, HV513, HV607, HV613, HX515, HX520, HX615, HX620, LT625, LoneStar, M1100, M1200, M1400, M1400 Metro II, M1600 Metro II, M700, M800, M800 Navy, M800 Post Office, MA1200, MS1210, MV607, ProStar, S1723, S1823, S1853, Scout, Scout II, TerraStar, TranStar, Travelall, WorkStar 7300, WorkStar 7600, 100, 150, 200, 400, 500, 1000A, 1000B, 1000C, 1000D, 1100A, 1100B, 1100C, 1100D, 1200A, 1200C, 1200D, 1300A, 1300B, 1300C, 1300D, 1452SC, 1652SC, 1924 S, 1925 S, 3000FE, 3000IC, 3000RE, 3900FC, 4200LP, 4300LP, 4400LP, 4600LP, 4700LP, 5600i, 8500 TranStar, 8600 TranStar, 900A, 908B, 908C, 1010, 1110, 1210, 1310, 1654, 1724, 1754, 1824, 1854, 1954, 1955, 2155, 2275, 2554, 2574, 2575, 2654, 2674, 3000, 3200, 3400, 3700, 3800, 4200, 4300, 4400, 4600, 4700, 4800, 4900, 5070, 7100, 8100, 8200, 8300, 8500, 9100 SBA, 9100i SBA, 9200i SBA, 9300, 9400, 9400i SBA, 9600, 9700, 9800 SBA, 9900i, 9900ix.


Monroe
2018 International HX620 Shock Absorber - Rear Monroe - Monroe Magnum Shock Absorber

P311-33A18E7    65484  New

3514952C1 , 3514952C2 , 4C4Z18125CA , 57905001 , 579051 , 60670005 , 60670005L , 60675003 , 60675003L , 83121

Qty:
In Stock & Ready to Ship
$90.46
Monroe Shock Absorber Rear
  • Gas-Magnum 65 Shock Absorber
  • Shocks are 1.75 in Bore Hendrickson HAS 230 Air Suspension Hendrickson HAS 460 Suspension Replaces OE #(s) 3626571C1 For additional OE Part Number cross reference information, please refer to the product interchange
  • Monroe Shocks & Struts Gas-Magnum 65 65484 Shock Absorber
  • Monroe Magnum Shock Absorber
  • The Monroe® Magnum™ shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today's heavy truck suspension systems. Its extra-large piston bore is engineered to handle the demands of high mileage and severe use. When combined, the gas charge and large-bore provide the consistent control necessary for demanding truck suspensions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Monroe
Position: Rear
Additional Fitment Information:
Vehicle Position
2018 - International HX620 Rear
Monroe
2019 International HX620 Shock Absorber - Rear Monroe - Monroe Magnum Shock Absorber

P311-2160720    65507  New

60680004 , 60680004L , 606804

Qty:
In Stock & Ready to Ship
$95.22
Monroe Shock Absorber Rear
  • Gas-Magnum 65 Shock Absorber
  • Shocks are 1.75 in Bore with Hendrickson HMX 400 Haulmaax Suspension System with Hendrickson HMX 460 Haulmaax Suspension System with 16.5 in Saddle Height
  • Monroe Shocks & Struts Gas-Magnum 65 65507 Shock Absorber
  • Monroe Magnum Shock Absorber
  • The Monroe® Magnum™ shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today's heavy truck suspension systems. Its extra-large piston bore is engineered to handle the demands of high mileage and severe use. When combined, the gas charge and large-bore provide the consistent control necessary for demanding truck suspensions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Monroe
Position: Rear
Additional Fitment Information:
Vehicle Position
2019 - International HX620 Rear
Bilstein
Shock Absorber Bilstein

P311-4126088    33-304311  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 384.0
    • Extended Length (MM): 607.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: 9/2 (comp/reb)
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: Digressive
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-4143CFF    AK1195  New

Qty:
In Stock & Ready to Ship
$129.23
Bilstein Shock Absorber
  • AK Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Stock Mount Smooth Body
    • Body Diameter (ID): 46mm
    • Body Inside Diameter: 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length:
      • 236mm
      • 9.290 In.
    • Collapsed Length (MM): 236.0
    • Compression @0.26m/s: 1600
    • Compression @0.52m/s: 2000
    • Extended Length:
      • 13.940 In.
      • 354mm
    • Extended Length (MM): 354.0
    • Internal Design: Monotube
    • Lower Mount Type: Bar Pin
    • PartType: Shocks / Struts
    • Piston Type: Digressive
    • Prop 65 (Y/N): Y
    • Rebound @0.26m/s: 2570
    • Rebound @0.52m/s: 3090
    • Segment: Motorsports
    • Shock Stroke: 4.650 In.
    • Spring Seat Included: No
    • Upper Mount Type: Stem
    • Valving Identifier: 577/359
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Race-winning valvings for optimum weight transfer, feel, and grip in various track conditions
    • Monotube design ensures consistent, fade-free performance in all conditions
    • Direct fit (OE) mounting design
  • Bilstein AK Series shock absorbers are designed for motorsports applications that require the use of the OE mounting components. Each shock absorber features a monotube design with steel spring valve discs for consistent, fade free performance and superior durability. AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-5242050    33-304205  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 384.0
    • Extended Length (MM): 607.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: 4(comp/reb)
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: Linear
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-569DF58    AK1198  New

Qty:
In Stock & Ready to Ship
$148.96
Bilstein Shock Absorber
  • AK Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Stock Mount Smooth Body
    • Body Diameter (ID): 46mm
    • Body Inside Diameter: 46mm
    • Body Material: Steel
    • Boot Included: Blue Straight
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length:
      • 12.640 In.
      • 321mm
    • Collapsed Length (MM): 321.0
    • Compression @0.26m/s: 330
    • Compression @0.52m/s: 520
    • Extended Length:
      • 20.160 In.
      • 512mm
    • Extended Length (MM): 512.0
    • Internal Design: Monotube
    • Lower Mount Type: Eye 12mm
    • PartType: Shocks / Struts
    • Piston Type: Linear
    • Prop 65 (Y/N): Y
    • Rebound @0.26m/s: 905
    • Rebound @0.52m/s: 1275
    • Segment: Motorsports
    • Shock Stroke: 7.520 In.
    • Spring Seat Included: No
    • Upper Mount Type: Stem
    • Valving Identifier: 152/103
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Race-winning valvings for optimum weight transfer, feel, and grip in various track conditions
    • Monotube design ensures consistent, fade-free performance in all conditions
    • Direct fit (OE) mounting design
  • Bilstein AK Series shock absorbers are designed for motorsports applications that require the use of the OE mounting components. Each shock absorber features a monotube design with steel spring valve discs for consistent, fade free performance and superior durability. AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-291FFDF    33-304281  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 384.0
    • Extended Length (MM): 607.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: 8/2 (comp/reb)
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: Digressive
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-025645F    33-304328  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 384.0
    • Extended Length (MM): 607.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: 10/2 (comp/reb)
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: Digressive
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-3AA6554    AK1053  New

Qty:
In Stock & Ready to Ship
$117.88
Bilstein Shock Absorber
  • AK Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Stock Mount Smooth Body
    • Body Diameter (ID): 46mm
    • Body Inside Diameter: 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length:
      • 234mm
      • 9.210 In.
    • Collapsed Length (MM): 234.0
    • Compression @0.26m/s: 730
    • Compression @0.52m/s: 1200
    • Extended Length:
      • 14.110 In.
      • 358.5mm
    • Extended Length (MM): 358.5
    • Internal Design: Monotube
    • Lower Mount Type: Bar Pin
    • PartType: Shocks / Struts
    • Piston Type: Linear
    • Prop 65 (Y/N): Y
    • Rebound @0.26m/s: 2515
    • Rebound @0.52m/s: 4275
    • Segment: Motorsports
    • Shock Stroke: 4.900 In.
    • Spring Seat Included: No
    • Upper Mount Type: Stem
    • Valving Identifier: 565/164
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Race-winning valvings for optimum weight transfer, feel, and grip in various track conditions
    • Monotube design ensures consistent, fade-free performance in all conditions
    • Direct fit (OE) mounting design
  • Bilstein AK Series shock absorbers are designed for motorsports applications that require the use of the OE mounting components. Each shock absorber features a monotube design with steel spring valve discs for consistent, fade free performance and superior durability. AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-3C48548    33-304007  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 330.0
    • Extended Length (MM): 503.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: Digressive
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: 2/10 (comp/reb)
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-2138FFC    33-298191  New

Qty:
In Stock & Ready to Ship
$449.39
Bilstein Shock Absorber
  • SNS2 Series (BV) - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 403.2
    • Extended Length (MM): 604.4
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: Digressive
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: 8/2 (comp/reb)
  • Features:
    • Comes with IMCA-legal plug assembly installed (SNS2 Series)
    • Modular steel body design allows racer rebuildability
    • Base Valve design delivers ultra low rod pressures and elminates gas preload
  • Bilstein SNS2 Series (BV) shock absorbers feature an all-steel smooth body construction with 46mm internal bore (piston and piston band sold separately, base valve assembly and premium Teflon heims.  These shock absorbers include a steel body with external nitrogen fill valve and can be converted to a coilover application (kit sold separately).  SNS2 Series (BV) shock absorbers are ideal for racers competing within sanctioning rules require all-steel body construction who are looking for rebuildable dampers with extra tuning options through base valve technology. 

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-19CFFE8    33-304113  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 330.0
    • Extended Length (MM): 503.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: Digressive
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: 4/12 (comp/reb)
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-19B9445    33-304304  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 384.0
    • Extended Length (MM): 607.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: 9/1 (comp/reb)
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: Digressive
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-05D1951    33-304052  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 330.0
    • Extended Length (MM): 503.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: Digressive
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: 3/8 (comp/reb)
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-16568C6    33-304083  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 330.0
    • Extended Length (MM): 503.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: Linear
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: 4/6 (comp/reb)
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-58FC288    33-304182  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 384.0
    • Extended Length (MM): 607.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: 3/5 (comp/reb)
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: Linear
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-492FB99    AK7110SB06  New

Qty:
In Stock & Ready to Ship
$309.98
Bilstein Shock Absorber
  • M 7100 - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Length: Yes
    • Body Design: Smooth Body (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Inside Diameter: 46mm
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length:
      • 14.210 In.
      • 360.9mm
    • Collapsed Length (IN) Rounded: 14
    • Collapsed Length (MM): 360.9
    • Collapsed Length Rounded: 14 In.
    • Compression @0.52m/s: 800
    • Extended Length:
      • 24.310 In.
      • 617.5mm
    • Extended Length (IN) Rounded: 24
    • Extended Length (MM): 617.5
    • Extended Length Rounded: 24 In.
    • Internal Design: Monotube
    • Lower Mount Type:
      • 0.500 In. Heim
      • 1/2in Heim
    • Mount Type: Eye-to-eye
    • Optional Reservoir Clamp: N/a
    • PartType: Shocks / Struts
    • Prop 65 (Y/N): Y
    • Rebound @0.26m/s: 3600
    • Rebound @0.52m/s: 3600
    • Reservoir: Yes
    • Reservoir Included: Yes
    • Segment: Motorsports
    • Shock Stroke: 10.100 In.
    • Spring Seat Included: No
    • Upper Mount Type:
      • 0.500 In. Heim
      • 1/2in Heim
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • High-flow piston reduces harshness
    • 46mm monotube design ensures consistent, fade-free performance in all conditions
    • Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
  • Bilstein M 7100 shock absorbers are designed for custom off-road motorsports and recreational applications. These shock absorbers are owner rebuildable and are available in remote reservoir or non-reservoir configurations. Each shock absorber is supplied with ½ inch heims and misalignment spacers for maximum durability in off-road conditions. M 7100 shock absorbers are available in a wide array of lengths and valve settings. Service components for M 7100 shock absorbers are readily available and sold separately. M 7100 shock absorbers will offer reliable performance that is customizable to meet specific demands.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-2466F45    33-298016  New

Qty:
In Stock & Ready to Ship
$449.39
Bilstein Shock Absorber
  • SNS2 Series (BV) - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 339.0
    • Extended Length (MM): 486.8
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: Digressive
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: 4/10 (comp/reb)
  • Features:
    • Comes with IMCA-legal plug assembly installed (SNS2 Series)
    • Modular steel body design allows racer rebuildability
    • Base Valve design delivers ultra low rod pressures and elminates gas preload
  • Bilstein SNS2 Series (BV) shock absorbers feature an all-steel smooth body construction with 46mm internal bore (piston and piston band sold separately, base valve assembly and premium Teflon heims.  These shock absorbers include a steel body with external nitrogen fill valve and can be converted to a coilover application (kit sold separately).  SNS2 Series (BV) shock absorbers are ideal for racers competing within sanctioning rules require all-steel body construction who are looking for rebuildable dampers with extra tuning options through base valve technology. 

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-3F21FAE    33-304014  New

Qty:
In Stock & Ready to Ship
$255.13
Bilstein Shock Absorber
  • SNS2 Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Smooth Body Screw Top (non-coilover)
    • Body Diameter (ID): 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length (MM): 330.0
    • Extended Length (MM): 503.0
    • Internal Design: Monotube
    • Lower Mount Type: 1/2in Heim
    • PartType: Shocks / Struts
    • Piston Type: Digressive
    • Prop 65 (Y/N): Y
    • Segment: Motorsports
    • Spring Hardware: B4-boa-0000117
    • Spring Seat Included: No
    • Upper Mount Type: 1/2in Heim
    • Valving Identifier: 2/12 (comp/reb)
  • Features:
    • Standard 1/2” graphite heims
    • 46mm piston design for maximum damping control
    • Plated steel body for durability and superior heat dissipation
  • Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-0915552    24-296830  New

SMX-GM-F-5

Qty:
In Stock & Ready to Ship
$179.15
Bilstein Shock Absorber
  • SMX Series - Suspension Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Stock Mount Smooth Body
    • Body Diameter (ID): 46mm
    • Body Inside Diameter: 46mm
    • Body Material: Steel
    • Boot Included: No
    • California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
    • Collapsed Length:
      • 210mm
      • 8.270 In.
    • Collapsed Length (MM): 210.0
    • Compression @ 10"/sec: 275
    • Compression @ 5"/sec: 117
    • Compression @5in/s: 117
    • Extended Length:
      • 12.010 In.
      • 305mm
    • Extended Length (MM): 305.0
    • Internal Design: Monotube
    • Lower Mount Type: Bar Pin
    • PartType: Shocks / Struts
    • Piston Type: Linear
    • Prop 65 (Y/N): Y
    • Rebound @ 10"/sec: 275
    • Rebound @ 5"/sec: 149
    • Rebound @5in/s: 149
    • Segment: Motorsports
    • Spring Hardware: N/a
    • Spring Seat Included: No
    • Upper Mount Type: Stem
    • Valving Identifier: 5 (com/reb)
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • A wide range of valving choices available for endless tuning combinations
    • 46mm piston design for maximum damping control
    • Stock mount design for GM metric chassis applications
  • Bilstein SMX Series shock absorbers are specifically designed for motorsports applications that mandate the use of stock mount (OE) suspension components. Designed using 46mm monotube technology, the shocks are available in a variety of damping options including dry kit designed specifically to provide the best options for a variety of race track types and conditions. Built in the USA with precision components and top quality controls, the SMX Series shocks deliver Bilstein’s famous fade-free performance and consistency in a factory-mount package that championship winning racers demand.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle