Shop for Discount Auto Parts, Replacement and Performance Parts and Accessories

2009 International 3200 Shock Absorber - Front Monroe - Monroe Magnum Shock Absorber

Part # P311-21D055F Manu # 66422 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 3533356C1 , 3578105C2 , 83135

Qty:

In Stock & Ready to Ship

Best Price: $53.22

Gas-Magnum 60 Shock Absorber
Shocks are 1.38 in Bore with 8,000 lb Axle(s) Replaces OE #(s) 3533356C1
Monroe Shocks & Struts Gas-Magnum 60 66422 Shock Absorber
Monroe Magnum Shock Absorber
The Monroe® Magnum™ shock absorber for class 3-6 Vehicles is gas-charged for quicker response and a stable, more comfortable ride. Replacing worn-out units with hard-working Magnum™ shocks can help reduce excessive vibration. The result can be better tire life, less downtime and a lower cost per mile.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Brand: Monroe

Position: Front

Vehicle	Body	Position
2009 - International 3200	Bus (Non School) - Cab Forward	Front

2003 International 3200 Shock Absorber - Rear Monroe - Monroe Magnum Shock Absorber

Part # P311-4BAD455 Manu # 65488 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 3578858C1 , 3578858C2 , 4C4Z18125DA , 6127713C1 , 85926

Qty:

In Stock & Ready to Ship

Best Price: $94.62

Gas-Magnum 65 Shock Absorber
Shocks are 1.75 in Bore with International/Navistar IROS Flat Floor with 9.50 Ride Height Replaces OE #(s) 3578858C1
Monroe Shocks & Struts Gas-Magnum 65 65488 Shock Absorber
Monroe Magnum Shock Absorber
The Monroe® Magnum™ shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today's heavy truck suspension systems. Its extra-large piston bore is engineered to handle the demands of high mileage and severe use. When combined, the gas charge and large-bore provide the consistent control necessary for demanding truck suspensions
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Brand: Monroe

Position: Rear

Vehicle	Body	Position
2003 - International 3200	Bus (Non School) - Cab Forward	Rear

2006 International 3200 Shock Absorber - Front Monroe - Monroe Magnum Shock Absorber

Part # P311-12CFA1C Manu # 65143 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 3533356C1 , 3578105C1 , 3578105C2 , 4020884C1 , 6127088C1 , 83135

Qty:

In Stock & Ready to Ship

Best Price: $74.24

Gas-Magnum 65 Shock Absorber
Shocks are 1.75 in Bore with 8,000 lb Axle(s) Replaces OE #(s) 3533356C1
Monroe Shocks & Struts Gas-Magnum 65 65143 Shock Absorber
Monroe Magnum Shock Absorber
The Monroe® Magnum™ shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today's heavy truck suspension systems. Its extra-large piston bore is engineered to handle the demands of high mileage and severe use. When combined, the gas charge and large-bore provide the consistent control necessary for demanding truck suspensions
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Brand: Monroe

Position: Front

Vehicle	Body	Position
2006 - International 3200	Bus (Non School) - Cab Forward	Front

Shock Absorber Bilstein

Part # P311-4126088 Manu # 33-304311 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 384.0
- Extended Length (MM): 607.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: 9/2 (comp/reb)
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: Digressive
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-4143CFF Manu # AK1195 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $129.23

AK Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Stock Mount Smooth Body
- Body Diameter (ID): 46mm
- Body Inside Diameter: 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length:
  - 236mm
  - 9.290 In.
- Collapsed Length (MM): 236.0
- Compression @0.26m/s: 1600
- Compression @0.52m/s: 2000
- Extended Length:
  - 13.940 In.
  - 354mm
- Extended Length (MM): 354.0
- Internal Design: Monotube
- Lower Mount Type: Bar Pin
- PartType: Shocks / Struts
- Piston Type: Digressive
- Prop 65 (Y/N): Y
- Rebound @0.26m/s: 2570
- Rebound @0.52m/s: 3090
- Segment: Motorsports
- Shock Stroke: 4.650 In.
- Spring Seat Included: No
- Upper Mount Type: Stem
- Valving Identifier: 577/359
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Race-winning valvings for optimum weight transfer, feel, and grip in various track conditions
- Monotube design ensures consistent, fade-free performance in all conditions
- Direct fit (OE) mounting design
Bilstein AK Series shock absorbers are designed for motorsports applications that require the use of the OE mounting components. Each shock absorber features a monotube design with steel spring valve discs for consistent, fade free performance and superior durability. AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-5242050 Manu # 33-304205 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 384.0
- Extended Length (MM): 607.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: 4(comp/reb)
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: Linear
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-569DF58 Manu # AK1198 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $148.96

AK Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Stock Mount Smooth Body
- Body Diameter (ID): 46mm
- Body Inside Diameter: 46mm
- Body Material: Steel
- Boot Included: Blue Straight
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length:
  - 12.640 In.
  - 321mm
- Collapsed Length (MM): 321.0
- Compression @0.26m/s: 330
- Compression @0.52m/s: 520
- Extended Length:
  - 20.160 In.
  - 512mm
- Extended Length (MM): 512.0
- Internal Design: Monotube
- Lower Mount Type: Eye 12mm
- PartType: Shocks / Struts
- Piston Type: Linear
- Prop 65 (Y/N): Y
- Rebound @0.26m/s: 905
- Rebound @0.52m/s: 1275
- Segment: Motorsports
- Shock Stroke: 7.520 In.
- Spring Seat Included: No
- Upper Mount Type: Stem
- Valving Identifier: 152/103
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Race-winning valvings for optimum weight transfer, feel, and grip in various track conditions
- Monotube design ensures consistent, fade-free performance in all conditions
- Direct fit (OE) mounting design
Bilstein AK Series shock absorbers are designed for motorsports applications that require the use of the OE mounting components. Each shock absorber features a monotube design with steel spring valve discs for consistent, fade free performance and superior durability. AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-291FFDF Manu # 33-304281 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 384.0
- Extended Length (MM): 607.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: 8/2 (comp/reb)
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: Digressive
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-025645F Manu # 33-304328 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 384.0
- Extended Length (MM): 607.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: 10/2 (comp/reb)
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: Digressive
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-3AA6554 Manu # AK1053 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $117.88

AK Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Stock Mount Smooth Body
- Body Diameter (ID): 46mm
- Body Inside Diameter: 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length:
  - 234mm
  - 9.210 In.
- Collapsed Length (MM): 234.0
- Compression @0.26m/s: 730
- Compression @0.52m/s: 1200
- Extended Length:
  - 14.110 In.
  - 358.5mm
- Extended Length (MM): 358.5
- Internal Design: Monotube
- Lower Mount Type: Bar Pin
- PartType: Shocks / Struts
- Piston Type: Linear
- Prop 65 (Y/N): Y
- Rebound @0.26m/s: 2515
- Rebound @0.52m/s: 4275
- Segment: Motorsports
- Shock Stroke: 4.900 In.
- Spring Seat Included: No
- Upper Mount Type: Stem
- Valving Identifier: 565/164
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Race-winning valvings for optimum weight transfer, feel, and grip in various track conditions
- Monotube design ensures consistent, fade-free performance in all conditions
- Direct fit (OE) mounting design
Bilstein AK Series shock absorbers are designed for motorsports applications that require the use of the OE mounting components. Each shock absorber features a monotube design with steel spring valve discs for consistent, fade free performance and superior durability. AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-3C48548 Manu # 33-304007 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 330.0
- Extended Length (MM): 503.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: Digressive
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: 2/10 (comp/reb)
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-2138FFC Manu # 33-298191 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $449.39

SNS2 Series (BV) - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 403.2
- Extended Length (MM): 604.4
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: Digressive
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: 8/2 (comp/reb)
Features:
- Comes with IMCA-legal plug assembly installed (SNS2 Series)
- Modular steel body design allows racer rebuildability
- Base Valve design delivers ultra low rod pressures and elminates gas preload
Bilstein SNS2 Series (BV) shock absorbers feature an all-steel smooth body construction with 46mm internal bore (piston and piston band sold separately, base valve assembly and premium Teflon heims. These shock absorbers include a steel body with external nitrogen fill valve and can be converted to a coilover application (kit sold separately). SNS2 Series (BV) shock absorbers are ideal for racers competing within sanctioning rules require all-steel body construction who are looking for rebuildable dampers with extra tuning options through base valve technology.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-19CFFE8 Manu # 33-304113 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 330.0
- Extended Length (MM): 503.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: Digressive
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: 4/12 (comp/reb)
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-19B9445 Manu # 33-304304 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 384.0
- Extended Length (MM): 607.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: 9/1 (comp/reb)
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: Digressive
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-05D1951 Manu # 33-304052 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 330.0
- Extended Length (MM): 503.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: Digressive
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: 3/8 (comp/reb)
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-16568C6 Manu # 33-304083 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 330.0
- Extended Length (MM): 503.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: Linear
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: 4/6 (comp/reb)
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-58FC288 Manu # 33-304182 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 384.0
- Extended Length (MM): 607.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: 3/5 (comp/reb)
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: Linear
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-492FB99 Manu # AK7110SB06 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $309.98

M 7100 - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Length: Yes
- Body Design: Smooth Body (non-coilover)
- Body Diameter (ID): 46mm
- Body Inside Diameter: 46mm
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length:
  - 14.210 In.
  - 360.9mm
- Collapsed Length (IN) Rounded: 14
- Collapsed Length (MM): 360.9
- Collapsed Length Rounded: 14 In.
- Compression @0.52m/s: 800
- Extended Length:
  - 24.310 In.
  - 617.5mm
- Extended Length (IN) Rounded: 24
- Extended Length (MM): 617.5
- Extended Length Rounded: 24 In.
- Internal Design: Monotube
- Lower Mount Type:
  - 0.500 In. Heim
  - 1/2in Heim
- Mount Type: Eye-to-eye
- Optional Reservoir Clamp: N/a
- PartType: Shocks / Struts
- Prop 65 (Y/N): Y
- Rebound @0.26m/s: 3600
- Rebound @0.52m/s: 3600
- Reservoir: Yes
- Reservoir Included: Yes
- Segment: Motorsports
- Shock Stroke: 10.100 In.
- Spring Seat Included: No
- Upper Mount Type:
  - 0.500 In. Heim
  - 1/2in Heim
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
Features:
- High-flow piston reduces harshness
- 46mm monotube design ensures consistent, fade-free performance in all conditions
- Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
Bilstein M 7100 shock absorbers are designed for custom off-road motorsports and recreational applications. These shock absorbers are owner rebuildable and are available in remote reservoir or non-reservoir configurations. Each shock absorber is supplied with ½ inch heims and misalignment spacers for maximum durability in off-road conditions. M 7100 shock absorbers are available in a wide array of lengths and valve settings. Service components for M 7100 shock absorbers are readily available and sold separately. M 7100 shock absorbers will offer reliable performance that is customizable to meet specific demands.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-2466F45 Manu # 33-298016 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $449.39

SNS2 Series (BV) - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 339.0
- Extended Length (MM): 486.8
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: Digressive
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: 4/10 (comp/reb)
Features:
- Comes with IMCA-legal plug assembly installed (SNS2 Series)
- Modular steel body design allows racer rebuildability
- Base Valve design delivers ultra low rod pressures and elminates gas preload
Bilstein SNS2 Series (BV) shock absorbers feature an all-steel smooth body construction with 46mm internal bore (piston and piston band sold separately, base valve assembly and premium Teflon heims. These shock absorbers include a steel body with external nitrogen fill valve and can be converted to a coilover application (kit sold separately). SNS2 Series (BV) shock absorbers are ideal for racers competing within sanctioning rules require all-steel body construction who are looking for rebuildable dampers with extra tuning options through base valve technology.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Shock Absorber Bilstein

Part # P311-3F21FAE Manu # 33-304014 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.13

SNS2 Series - Suspension Shock Absorber
46mm Monotube Shock Absorber
Product Attributes:
- Adjustable Damping: Non-adjustable
- Body Design: Smooth Body Screw Top (non-coilover)
- Body Diameter (ID): 46mm
- Body Material: Steel
- Boot Included: No
- California Proposition 65: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
- Collapsed Length (MM): 330.0
- Extended Length (MM): 503.0
- Internal Design: Monotube
- Lower Mount Type: 1/2in Heim
- PartType: Shocks / Struts
- Piston Type: Digressive
- Prop 65 (Y/N): Y
- Segment: Motorsports
- Spring Hardware: B4-boa-0000117
- Spring Seat Included: No
- Upper Mount Type: 1/2in Heim
- Valving Identifier: 2/12 (comp/reb)
Features:
- Standard 1/2” graphite heims
- 46mm piston design for maximum damping control
- Plated steel body for durability and superior heat dissipation
Bilstein SNS2 Series shock absorbers feature a steel, smooth body design utilizing the 46mm monotube technology (piston and piston band sold separately) designed for motorsports applications. These shock absorbers feature a steel body cap and a Schrader valve or fill plug. They are upgradeable to adjustable shafts and can be converted to a coilover (kit sold separately). SNS2 Series shock absorbers are ideal for racers whose sanctioning rules require an all steel construction with rebuild capability.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Bilstein

Vehicle

Finish Selecting Your Vehicle to Shop For Your Shock Absorber

Shop By Brand

Shop By Related Shock Absorber Parts

Shop for Top Selling Genuine International 3200 Shock Absorbers

Shop International 3200 Shock Absorbers

Finish Selecting Your Vehicle to Shop For Your Shock Absorber

Shop By Brand

Shop By Related Shock Absorber Parts

Shop for Top Selling Genuine International 3200 Shock Absorbers