2012 Ram 1500 Rack and Pinion Assembly Cardone - Reman. A-1 CARDONE - Hydraulic Power Steering Rack & Pinon [Complete Unit]
P311-5768D9E 22-382 Remanufactured
55366385AJ , 55366383AF , 55366383AE , 55398505AC , 55366385AD , 5154491AA , 5154492AA , 55366385AE , 55398506AD , 55366385AG , 55398505AE , 55366385AF , 55398506AH , 55398505AD , 55398506AE , 55366383AD , 55398506AC
Qty:
$115.20
$136.73
- Remanufactured Hydraulic Power Rack and Pinion Complete Unit
- Inline filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system.
- Reman. A-1 CARDONE - Hydraulic Power Steering Rack & Pinon [Complete Unit]
- Product Attributes:
-
- Casting Material: Steel/aluminum
- Distance Between Mounting Holes (in): 11.50
- Distance Between Mounting Holes (mm): 292.10
- FAQs:
- For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
- I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
- Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
- The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
- The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
- This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
- Features and Benefits:
- Application Of Specialized Lubricant(s) For Extended Life
- Each Unit Undergoes Cardone’s Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
- Finished In Protective Coating To Prevent Corrosion And/or Rust
- Replacement Of Rubber Sealing Components
- Input Shaft Diameter (in): 0.70
- Input Shaft Diameter (mm): 17.78
- Input Shaft Length (in): 1.88
- Input Shaft Length (mm): 47.63
- Pressure Port Thread Size: M18 X 1.5
- Product Condition: Remanufactured
- Rack Length (in): 56.50
- Rack Length (mm): 1435.10
- Return Port Thread Size: M20 X 1.5
- Steering Rack Color: Black
- Thread Length (mm): 65.63
- Tie Rod Ends Included: Inner
- Total Turns Lock to Lock: 3.16
- A1 CARDONE Remanufactured Rack and Pinion units are built to meet or exceed OEM performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested using state of the art testing equipment, to ensure proper function, providing a reliable, long-lasting, product both you and your vehicle can rely on.
Brand: Cardone
