Finish Selecting Your Vehicle to Shop For Your Rack and Pinion Assembly

Choose a Year for your Pontiac Grand Prix 's Rack and Pinion Assembly

  • 2008
  • 2007
  • 2006
  • 2005
  • 2004
  • 2003
  • 2002
  • 2001
  • 2000
  • 1999
  • 1998
  • 1997
  • 1996
  • 1995
  • 1994
  • 1993
  • 1992
  • 1991
  • 1990
  • 1989
  • 1988

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • Accudrive Racks
    Accudrive Racks
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Flaming River
    Flaming River
  • Ford Racing
    Ford Racing
  • Mapco
    Mapco
  • Maval
    Maval
  • PWR
    PWR

Shop By Related Rack and Pinion Assembly Parts

Shop below for all Rack and Pinion Assembly related parts for your Pontiac Grand Prix


Shop for Top Selling Genuine Pontiac Grand Prix Rack and Pinion Assemblies

  • We Stock the following top leading brands, including Cardone, ACDelco, Accudrive Racks, Maval
  • Constantly Updated Inventory of Pontiac Grand Prix Replacement Rack and Pinion Assembly Parts

We also have Rack and Pinion Assembly parts for other Pontiac models, including Bonneville, Firebird, G6, Grand Am, Grand Prix, Montana, Sunfire, Vibe.


Cardone
2006 Pontiac Grand Prix Rack and Pinion Assembly 6 Cyl 3.8L Cardone - Rack and Pinion Assembly

P311-0956262    22-1003  Remanufactured

19207776 , 19207778 , 19330464 , 26079917 , 26079918 , 26079929 , 88955439 , 88955444 , 88964318 , 88964319 , 88965490 , TR26021769

Qty:
In Stock & Ready to Ship
$49.50 $187.28
Cardone Rack and Pinion Assembly
  • with Non-Variable Effort Steering (N40) Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification Sticker with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.78
    • Input Shaft Diameter (mm): 19.89
    • Input Shaft Length (in): 1.88
    • Input Shaft Length (mm): 47.63
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 49.75
    • Rack Length (mm): 1263.65
    • Return Port ID Size: 0.24
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 59.79
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Pontiac Grand Prix V 6 Cyl 3.8L 231 3800
Cardone
1997 Pontiac Grand Prix Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-455465D    22-162  Remanufactured

26031079 , 26079912

Qty:
In Stock & Ready to Ship
$51.30 $206.21
Cardone Rack and Pinion Assembly
  • with Variable Effort Steering (NV7) Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification Sticker with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: Yes
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.79
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 48.38
    • Rack Length (mm): 1228.73
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 62.89
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
1997 - Pontiac Grand Prix
Cardone
2001 Pontiac Grand Prix Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-455465D    22-162  Remanufactured

Qty:
In Stock & Ready to Ship
$51.30 $206.21
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: Yes
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.79
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 48.38
    • Rack Length (mm): 1228.73
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 62.89
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Submodel
2001 - Pontiac Grand Prix GT
Cardone
2004 Pontiac Grand Prix Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-0D99F91    22-182  Remanufactured

Qty:
In Stock & Ready to Ship
$89.10 $198.62
Cardone Rack and Pinion Assembly
  • with Magnetic Speed Variable Assist Steering (NV8) Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: Yes
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.71
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 49.50
    • Rack Length (mm): 1257.30
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 62.76
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
2004 - Pontiac Grand Prix
Cardone
2005 Pontiac Grand Prix Rack and Pinion Assembly 6 Cyl 3.8L Cardone - Rack and Pinion Assembly

P311-0D99F91    22-182  Remanufactured

Qty:
In Stock & Ready to Ship
$89.10 $198.62
Cardone Rack and Pinion Assembly
  • with Variable Effort Steering (NV7) Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification Sticker with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: Yes
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.71
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 49.50
    • Rack Length (mm): 1257.30
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 62.76
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2005 - Pontiac Grand Prix V 6 Cyl 3.8L 231 3800
Cardone
2006 Pontiac Grand Prix Rack and Pinion Assembly 8 Cyl 5.3L Cardone - Rack and Pinion Assembly

P311-0D99F91    22-182  Remanufactured

26031078 , 26063582 , 26079916 , 88955437 , 88955438 , 88955443 , 88964316 , 88964317

Qty:
In Stock & Ready to Ship
$89.10 $198.62
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: Yes
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.71
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 49.50
    • Rack Length (mm): 1257.30
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 62.76
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2006 - Pontiac Grand Prix V 8 Cyl 5.3L 325 5328
Cardone
1996 Pontiac Grand Prix Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-04CDD7B    22-142  Remanufactured

26035401 , 26035402 , 26042017 , 26042018 , 26044830 , 26046144 , 26047206 , 26047207

Qty:
In Stock & Ready to Ship
$21.60 $115.18
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.71
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 48.63
    • Rack Length (mm): 1235.08
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 63.50
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
1996 - Pontiac Grand Prix
Cardone
1995 Pontiac Grand Prix Rack and Pinion Assembly 6 Cyl 3.4L Cardone - Rack and Pinion Assembly

P311-04CDD7B    22-142  Remanufactured

Qty:
In Stock & Ready to Ship
$21.60 $115.18
Cardone Rack and Pinion Assembly
  • with 16" Wheels with Variable Effort Steering (NV7) Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification Sticker with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.71
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 48.63
    • Rack Length (mm): 1235.08
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 63.50
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1995 - Pontiac Grand Prix V 6 Cyl 3.4L 207 -
Cardone
1994 Pontiac Grand Prix Rack and Pinion Assembly 6 Cyl 3.4L Cardone - Rack and Pinion Assembly

P311-04CDD7B    22-142  Remanufactured

Qty:
In Stock & Ready to Ship
$21.60 $115.18
Cardone Rack and Pinion Assembly
  • with 15" Wheels Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.25
    • Distance Between Mounting Holes (mm): 311.15
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.71
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 48.63
    • Rack Length (mm): 1235.08
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 63.50
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - Pontiac Grand Prix V 6 Cyl 3.4L 207 -
Cardone
1997 Pontiac Grand Prix Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-271B378    22-179  Remanufactured

Qty:
In Stock & Ready to Ship
$44.10 $166.73
Cardone Rack and Pinion Assembly
  • without Variable Effort Steering (NV7) Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Option Codes are on the Service Parts Identification Sticker with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.81
    • Distance Between Mounting Holes (mm): 325.45
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.81
    • Input Shaft Length (in): 1.83
    • Input Shaft Length (mm): 46.56
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 48.75
    • Rack Length (mm): 1238.25
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 62.79
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
1997 - Pontiac Grand Prix
Cardone
2002 Pontiac Grand Prix Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-271B378    22-179  Remanufactured

26049251 , 26079911

Qty:
In Stock & Ready to Ship
$44.10 $166.73
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.81
    • Distance Between Mounting Holes (mm): 325.45
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.81
    • Input Shaft Length (in): 1.83
    • Input Shaft Length (mm): 46.56
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 48.75
    • Rack Length (mm): 1238.25
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 62.79
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Submodel
2002 - Pontiac Grand Prix SE
ACDelco
2006 Pontiac Grand Prix Rack and Pinion Assembly ACDelco - Long Rack

P311-2D73434    W0133-2057440  New

Qty:
In Stock & Ready to Ship
$112.00 $910.97
ACDelco Rack and Pinion Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM Remanufactured
  • Excluding Magnetic Speed Variable Steering
  • Long Rack
Brand: ACDelco
Additional Fitment Information:
Vehicle Submodel
2006 - Pontiac Grand Prix GT
ACDelco
2008 Pontiac Grand Prix Rack and Pinion Assembly ACDelco - Long Rack

P311-2D73434    W0133-2057440  New

Qty:
In Stock & Ready to Ship
$112.00 $910.97
ACDelco Rack and Pinion Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM Remanufactured
  • Long Rack
Brand: ACDelco
Additional Fitment Information:
Vehicle Submodel
2008 - Pontiac Grand Prix Base
Cardone
1989 Pontiac Grand Prix Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-096B27B    22-119  Remanufactured

26003759 , 26006721 , 26006723 , 26012280 , 26012282 , 26019321 , 26019322 , 26019330 , 26020447 , 26021771 , 26024892 , 26024894 , 26024895

Qty:
In Stock & Ready to Ship
$16.20 $105.56
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.50
    • Distance Between Mounting Holes (mm): 317.50
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.71
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 48.75
    • Rack Length (mm): 1238.25
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 61.60
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
1989 - Pontiac Grand Prix
Cardone
1992 Pontiac Grand Prix Rack and Pinion Assembly 6 Cyl 3.1L Cardone - Rack and Pinion Assembly

P311-096B27B    22-119  Remanufactured

Qty:
In Stock & Ready to Ship
$16.20 $105.56
Cardone Rack and Pinion Assembly
  • with 16" Wheels Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Steel; Aluminum
    • Distance Between Mounting Holes (in): 12.50
    • Distance Between Mounting Holes (mm): 317.50
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.66
    • Input Shaft Diameter (mm): 16.71
    • Input Shaft Length (in): 1.13
    • Input Shaft Length (mm): 28.58
    • Package Contents: Rack And Pinion, Mounting Bushing Assembly, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 48.75
    • Rack Length (mm): 1238.25
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 61.60
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1992 - Pontiac Grand Prix V 6 Cyl 3.1L 189 -
Accudrive Racks
2006 Pontiac Grand Prix Rack and Pinion Assembly Accudrive Racks

P311-36217ED    3526  New

Qty:
In Stock & Ready to Ship
$125.00 $226.38
  • Intrigue/LaCrosse/Regal/Grand Prix with Magnasteer
  • with Magnasteer Power Rack
Brand: Accudrive Racks
Additional Fitment Information:
Vehicle
2006 - Pontiac Grand Prix
Cardone
2002 Pontiac Grand Prix Rack and Pinion Assembly Cardone - w/o Outer Tie Rod Ends

P311-58111CF    W0133-2224822  New

Qty:
In Stock & Ready to Ship
$88.00 $348.61
Cardone Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Excluding Magnasteer Variable Assist Steering
  • w/o Outer Tie Rod Ends
Brand: Cardone
Additional Fitment Information:
Vehicle
2002 - Pontiac Grand Prix
Maval
2005 Pontiac Grand Prix Rack and Pinion Assembly Maval - w/o Outer Tie Rod Ends

P311-432F307    W0133-1966021  New

Qty:
In Stock & Ready to Ship
$170.00 $427.11
Maval Rack and Pinion Assembly
  • Reman Complete Long Rack
  • with Magnetic Speed Variable Steering
  • w/o Outer Tie Rod Ends
Brand: Maval
Additional Fitment Information:
Vehicle Submodel
2005 - Pontiac Grand Prix GXP
Cardone
2004 Pontiac Grand Prix Rack and Pinion Assembly Cardone - w/o Outer Tie Rod Ends

P311-06F4368    W0133-2230007  New

Qty:
In Stock & Ready to Ship
$115.00 $383.29
Cardone Rack and Pinion Assembly
  • Reman Complete Long Rack
  • with Variable Power Steering (RPO NV7)
  • w/o Outer Tie Rod Ends
Brand: Cardone
Additional Fitment Information:
Vehicle
2004 - Pontiac Grand Prix
Cardone
2005 Pontiac Grand Prix Rack and Pinion Assembly Cardone - w/o Outer Tie Rod Ends

P311-06F4368    W0133-2230007  New

Qty:
In Stock & Ready to Ship
$115.00 $383.29
Cardone Rack and Pinion Assembly
  • Reman Complete Long Rack
  • with Magnetic Speed Variable Steering
  • w/o Outer Tie Rod Ends
Brand: Cardone
Additional Fitment Information:
Vehicle Submodel
2005 - Pontiac Grand Prix GXP