Finish Selecting Your Vehicle to Shop For Your Rack and Pinion Assembly

Choose a Year for your Ford Escape 's Rack and Pinion Assembly

  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010
  • 2009
  • 2008
  • 2007
  • 2006
  • 2005
  • 2004
  • 2003
  • 2002
  • 2001

Shop By Brand

The Following brands are available based on your search.

  • Accudrive Racks
    Accudrive Racks
  • Atlantic Automotive Eng.
    Atlantic Automotive Eng.
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Flaming River
    Flaming River
  • Ford Racing
    Ford Racing
  • Mapco
    Mapco
  • Maval
    Maval
  • Motorcraft
    Motorcraft

Shop By Related Rack and Pinion Assembly Parts

Shop below for all Rack and Pinion Assembly related parts for your Ford Escape


Shop for Top Selling Genuine Ford Escape Rack and Pinion Assemblies

  • We Stock the following top leading brands, including Cardone, Motorcraft, Maval, BBB Industries, Atlantic Automotive Eng.
  • Constantly Updated Inventory of Ford Escape Replacement Rack and Pinion Assembly Parts

Cardone
2001 Ford Escape Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-3138AF1    22-258  Remanufactured

3L8Z3504DARM , EC0132240 , EC0332110 , YL8Z3280EA , YL8Z3504KBRM

Qty:
In Stock & Ready to Ship
$94.50 $151.96
Cardone Rack and Pinion Assembly
  • with P235/70R16 Tires Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 11.75
    • Distance Between Mounting Holes (mm): 298.45
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.73
    • Input Shaft Diameter (mm): 18.42
    • Input Shaft Length (in): 1.88
    • Input Shaft Length (mm): 47.63
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port ID Size: 0.436
    • Product Condition: Remanufactured
    • Rack Length (in): 50.00
    • Rack Length (mm): 1270.00
    • Return Port ID Size: 0.386
    • Steering Rack Color: Black
    • Thread Length (mm): 63.50
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
2001 - Ford Escape
Cardone
2004 Ford Escape Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-3138AF1    22-258  Remanufactured

Qty:
In Stock & Ready to Ship
$94.50 $151.96
Cardone Rack and Pinion Assembly
  • with P235/70R16 Tires Before 12/22/2003 Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 11.75
    • Distance Between Mounting Holes (mm): 298.45
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.73
    • Input Shaft Diameter (mm): 18.42
    • Input Shaft Length (in): 1.88
    • Input Shaft Length (mm): 47.63
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port ID Size: 0.436
    • Product Condition: Remanufactured
    • Rack Length (in): 50.00
    • Rack Length (mm): 1270.00
    • Return Port ID Size: 0.386
    • Steering Rack Color: Black
    • Thread Length (mm): 63.50
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
2004 - Ford Escape
Cardone
2007 Ford Escape Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-23B0FFD    22-281  Remanufactured

5L8Z3504BA , 6L8Z3504D , 7L8Z3504D , EC0132240 , EF9132110 , EF9132110A , EF9132110B , EF9132110C , EF9132110R0C , YL8Z3280EA

Qty:
In Stock & Ready to Ship
$97.20 $180.65
Cardone Rack and Pinion Assembly
  • with P235/70R16 Tires Before 01/08/2007 Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 17.75
    • Distance Between Mounting Holes (mm): 450.85
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.73
    • Input Shaft Diameter (mm): 18.42
    • Input Shaft Length (in): 1.75
    • Input Shaft Length (mm): 44.45
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port ID Size: 0.436
    • Product Condition: Remanufactured
    • Rack Length (in): 51.00
    • Rack Length (mm): 1295.40
    • Return Port ID Size: 0.386
    • Steering Rack Color: Black
    • Thread Length (mm): 63.50
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Fuel Type
2007 - Ford Escape GAS
Cardone
2005 Ford Escape Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-23B0FFD    22-281  Remanufactured

Qty:
In Stock & Ready to Ship
$97.20 $180.65
Cardone Rack and Pinion Assembly
  • with P235/70R16 Tires Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 17.75
    • Distance Between Mounting Holes (mm): 450.85
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.73
    • Input Shaft Diameter (mm): 18.42
    • Input Shaft Length (in): 1.75
    • Input Shaft Length (mm): 44.45
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port ID Size: 0.436
    • Product Condition: Remanufactured
    • Rack Length (in): 51.00
    • Rack Length (mm): 1295.40
    • Return Port ID Size: 0.386
    • Steering Rack Color: Black
    • Thread Length (mm): 63.50
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Fuel Type
2005 - Ford Escape GAS
Cardone
2004 Ford Escape Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-23B0FFD    22-281  Remanufactured

Qty:
In Stock & Ready to Ship
$97.20 $180.65
Cardone Rack and Pinion Assembly
  • with P235/70R16 Tires From 12/23/2003 Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 17.75
    • Distance Between Mounting Holes (mm): 450.85
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.73
    • Input Shaft Diameter (mm): 18.42
    • Input Shaft Length (in): 1.75
    • Input Shaft Length (mm): 44.45
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port ID Size: 0.436
    • Product Condition: Remanufactured
    • Rack Length (in): 51.00
    • Rack Length (mm): 1295.40
    • Return Port ID Size: 0.386
    • Steering Rack Color: Black
    • Thread Length (mm): 63.50
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
2004 - Ford Escape
Cardone
2002 Ford Escape Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-25F57AD    22-265  Remanufactured

3L8Z3504CARM , EC0132110 , EC0132110A , EC0132240 , YL8Z3280EA , YL8Z3504JBRM

Qty:
In Stock & Ready to Ship
$48.60 $146.66
Cardone Rack and Pinion Assembly
  • without P235/70R16 Tires Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 17.75
    • Distance Between Mounting Holes (mm): 450.85
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.73
    • Input Shaft Diameter (mm): 18.42
    • Input Shaft Length (in): 1.81
    • Input Shaft Length (mm): 46.05
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port ID Size: 0.24
    • Product Condition: Remanufactured
    • Rack Length (in): 50.00
    • Rack Length (mm): 1270.00
    • Return Port ID Size: 0.24
    • Steering Rack Color: Black
    • Thread Length (mm): 63.50
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
2002 - Ford Escape
Cardone
2004 Ford Escape Rack and Pinion Assembly Cardone - Rack and Pinion Assembly

P311-25F57AD    22-265  Remanufactured

Qty:
In Stock & Ready to Ship
$48.60 $146.66
Cardone Rack and Pinion Assembly
  • without P235/70R16 Tires Before 12/22/2003 Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 17.75
    • Distance Between Mounting Holes (mm): 450.85
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.73
    • Input Shaft Diameter (mm): 18.42
    • Input Shaft Length (in): 1.81
    • Input Shaft Length (mm): 46.05
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port ID Size: 0.24
    • Product Condition: Remanufactured
    • Rack Length (in): 50.00
    • Rack Length (mm): 1270.00
    • Return Port ID Size: 0.24
    • Steering Rack Color: Black
    • Thread Length (mm): 63.50
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle
2004 - Ford Escape
Motorcraft
2011 Ford Escape Rack and Pinion Assembly Motorcraft - w/o Outer Tie Rod Ends

P311-0ACC384    W0133-2279517  New

Qty:
In Stock & Ready to Ship
$442.00 $1,063.92
Motorcraft Rack and Pinion Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Reman Complete Long Rack
  • w/o Outer Tie Rod Ends
Brand: Motorcraft
Additional Fitment Information:
Vehicle Fuel Type
2011 - Ford Escape FLEX
Motorcraft
2007 Ford Escape Rack and Pinion Assembly Motorcraft - w/o Outer Tie Rod Ends

P311-0ACC384    W0133-2279517  New

Qty:
In Stock & Ready to Ship
$442.00 $1,063.92
Motorcraft Rack and Pinion Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Reman Complete Long Rack
  • Production: 01/09/2007-
  • w/o Outer Tie Rod Ends
Brand: Motorcraft
Additional Fitment Information:
Vehicle Submodel Prod. Date Range
2007 - Ford Escape Hybrid Fr:01-09-07
Maval
2004 Ford Escape Rack and Pinion Assembly Maval - w/o Outer Tie Rod Ends

P311-320B893    W0133-1917296  New

Qty:
In Stock & Ready to Ship
$120.00 $401.84
Maval Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Production: 12/22/2003-, Complete Assembly, Vendor:MOTORCRAFT, Vendor #STG-225
  • w/o Outer Tie Rod Ends
Brand: Maval
Additional Fitment Information:
Vehicle Prod. Date Range
2004 - Ford Escape Fr:12-22-03
Cardone
2002 Ford Escape Rack and Pinion Assembly Cardone - w/o Outer Tie Rod Ends

P311-1FFDA45    W0133-2226839  New

Qty:
In Stock & Ready to Ship
$123.00 $311.44
Cardone Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Complete Assembly, Reman., Vendor:MOTORCRAFT, Vendor #STG-145-RM, Stamped #SPR-BE
  • w/o Outer Tie Rod Ends
Brand: Cardone
Additional Fitment Information:
Vehicle
2002 - Ford Escape
Cardone
2004 Ford Escape Rack and Pinion Assembly Cardone - w/o Outer Tie Rod Ends

P311-1FFDA45    W0133-2226839  New

Qty:
In Stock & Ready to Ship
$123.00 $311.44
Cardone Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Production: -12/22/2003, Complete Assembly, Reman., Vendor:MOTORCRAFT, Vendor #STG-145-RM, Stamped #SPR-BE
  • w/o Outer Tie Rod Ends
Brand: Cardone
Additional Fitment Information:
Vehicle Prod. Date Range
2004 - Ford Escape To:12-22-03
BBB Industries
2002 Ford Escape Rack and Pinion Assembly BBB Industries - Reman Rack and Pinion

P311-50575AE    101-0170  Remanufactured

19320298

Qty:
In Stock & Ready to Ship
$69.00 $152.20
BBB Industries Rack and Pinion Assembly
  • Power Steering P235 Tires
  • Reman Rack and Pinion
  • Product Attributes:
    • Bushings Included: Yes
    • Distance Between Mounting Holes (mm): 298.45
    • Hydraulic or Electric: Hydraulic
    • Inner Tie Rods Included: Yes
    • Input Shaft Diameter (mm): 19.05
    • Input Shaft Length (mm): 44.45
    • Mounting Hole Quantity: 2
    • Outer Tie Rods Included: No
    • Pressure Port Thread Size: 11mm
    • Rack Length (mm): 1270
    • Return Port Thread Size: 9.5mm
    • Turns Lock To Lock: 2.938
Brand: BBB Industries
Additional Fitment Information:
Vehicle
2002 - Ford Escape
BBB Industries
2004 Ford Escape Rack and Pinion Assembly BBB Industries - Reman Rack and Pinion

P311-50575AE    101-0170  Remanufactured

Qty:
In Stock & Ready to Ship
$69.00 $152.20
BBB Industries Rack and Pinion Assembly
  • Power Steering P235 Tires To 12/22/2003
  • Reman Rack and Pinion
  • Product Attributes:
    • Bushings Included: Yes
    • Distance Between Mounting Holes (mm): 298.45
    • Hydraulic or Electric: Hydraulic
    • Inner Tie Rods Included: Yes
    • Input Shaft Diameter (mm): 19.05
    • Input Shaft Length (mm): 44.45
    • Mounting Hole Quantity: 2
    • Outer Tie Rods Included: No
    • Pressure Port Thread Size: 11mm
    • Rack Length (mm): 1270
    • Return Port Thread Size: 9.5mm
    • Turns Lock To Lock: 2.938
Brand: BBB Industries
Additional Fitment Information:
Vehicle
2004 - Ford Escape
Maval
2006 Ford Escape Rack and Pinion Assembly Maval - w/o Outer Tie Rod Ends

P311-320B893    W0133-1917296  New

Qty:
In Stock & Ready to Ship
$120.00 $401.84
Maval Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Complete Assembly, Vendor:MOTORCRAFT, Vendor #STG-225
  • w/o Outer Tie Rod Ends
Brand: Maval
Additional Fitment Information:
Vehicle Submodel
2006 - Ford Escape Limited
Maval
2007 Ford Escape Rack and Pinion Assembly Maval - w/o Outer Tie Rod Ends

P311-320B893    W0133-1917296  New

Qty:
In Stock & Ready to Ship
$120.00 $401.84
Maval Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Production: -01/08/2007
  • w/o Outer Tie Rod Ends
Brand: Maval
Additional Fitment Information:
Vehicle Submodel Prod. Date Range
2007 - Ford Escape XLT To:01-08-07
Maval
2001 Ford Escape Rack and Pinion Assembly Maval - w/o Outer Tie Rod Ends

P311-4D463FF    W0133-1908876  New

Qty:
In Stock & Ready to Ship
$120.00 $248.54
Maval Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Complete Assembly, Reman., Vendor:MOTORCRAFT, Vendor #STG-145-RM, Stamped #SPR-BE
  • w/o Outer Tie Rod Ends
Brand: Maval
Additional Fitment Information:
Vehicle
2001 - Ford Escape
Maval
2004 Ford Escape Rack and Pinion Assembly Maval - w/o Outer Tie Rod Ends

P311-4D463FF    W0133-1908876  New

Qty:
In Stock & Ready to Ship
$120.00 $248.54
Maval Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Production: -12/22/2003, Complete Assembly, Reman., Vendor:MOTORCRAFT, Vendor #STG-145-RM, Stamped #SPR-BE
  • w/o Outer Tie Rod Ends
Brand: Maval
Additional Fitment Information:
Vehicle Prod. Date Range
2004 - Ford Escape To:12-22-03
Atlantic Automotive Eng.
2016 Ford Escape Rack and Pinion Assembly Atlantic Automotive Eng. - w/o Outer Tie Rod Ends

P311-5617AAB    W0133-3066315  New

Qty:
In Stock & Ready to Ship
$182.00 $1,394.27
Atlantic Automotive Eng. Rack and Pinion Assembly
  • Reman Electric Long Rack
  • No programming required. To finish installation scan and clear DTCs in vehicle.
  • w/o Outer Tie Rod Ends
Brand: Atlantic Automotive Eng.
Additional Fitment Information:
Vehicle
2016 - Ford Escape
Atlantic Automotive Eng.
2015 Ford Escape Rack and Pinion Assembly Atlantic Automotive Eng. - w/o Outer Tie Rod Ends

P311-5617AAB    W0133-3066315  New

Qty:
In Stock & Ready to Ship
$182.00 $1,394.27
Atlantic Automotive Eng. Rack and Pinion Assembly
  • Reman Electric Long Rack
  • Production: 01/15/2015-
  • No programming required. To finish installation scan and clear DTCs in vehicle.
  • w/o Outer Tie Rod Ends
Brand: Atlantic Automotive Eng.
Additional Fitment Information:
Vehicle Prod. Date Range
2015 - Ford Escape Fr:01-15-15