Choose Vehicle Year

Finish Selecting Your Vehicle

Choose a Year for your Volkswagen Rabbit

  • 2009
  • 2008
  • 2007
  • 2006
  • 1984

Shop By Part Type

You searched for "pickup". Below are all part types that match "pickup" below:

Chassis Wiring Harness
Chassis Wiring Harness
Distributor Ignition Pickup
Distributor Ignition Pickup
Distributor Ignition Pickup Magnet
Distributor Ignition Pickup Magnet
Distributor Optic Sensor
Distributor Optic Sensor
Engine Oil Pump Pickup Tube
Engine Oil Pump Pickup Tube
Engine Oil Pump Pickup Tube Adapter
Engine Oil Pump Pickup Tube Adapter
Engine Oil Pump Pickup Tube Gasket
Engine Oil Pump Pickup Tube Gasket
Engine Oil Pump Pickup Tube O-Ring
Engine Oil Pump Pickup Tube O-Ring
Engine Oil Pump Screen Installation Tool
Engine Oil Pump Screen Installation Tool
Fuel Pump
Fuel Pump
Fuel Tank Pickup
Fuel Tank Pickup
Ignition Crank Trigger Sensor
Ignition Crank Trigger Sensor
Ignition Harness
Ignition Harness
Jack Stowage Mount
Jack Stowage Mount
Spark Plug Wire
Spark Plug Wire
Tachometer / Fuel Injection Pickup
Tachometer / Fuel Injection Pickup
Tachometer Sensor
Tachometer Sensor
Tachometer Signal Pickup
Tachometer Signal Pickup

Shop By Brand

The Following brands are available based on your search.

  • Aeromotive Fuel System
    Aeromotive Fuel System
  • AutoMeter
    AutoMeter
  • Canton
    Canton
  • Equus
    Equus
  • FAST
    FAST
  • Facet
    Facet
  • Ford Performance
    Ford Performance
  • Genuine
    Genuine
  • Hi-lift Jack
    Hi-lift Jack
  • Holley
    Holley
  • MSD
    MSD
  • Original Equipment
    Original Equipment
  • Painless Wiring
    Painless Wiring
  • Pertronix
    Pertronix
  • Proform
    Proform

Shop By Product For Your Volkswagen Rabbit Matching "pickup"

The 46 products below are for your Volkswagen Rabbit, filtered by your keywords "pickup"

Showing Products for an Incomplete Vehicle

The products shown below are for a Volkswagen Rabbit, but you are missing a Year for your vehicle. Please pick a Year above to get the best fitment for the products below.

Showing 11 - 20 of 46 Products.

Refine Your Search

Canton
Engine Oil Pump Pickup Tube Canton

P311-4EB7A3B    15-277  New

Qty:
In Stock & Ready to Ship
$90.89
  • Canton 15-277 Oil Pump Pickup for LS Front Sump Oil Pan 15-276
  • 15-277 Oil Pump Pickup for LS Front Sump Oil Pan 15-276
  • Features:
    • Replaces stock GM GTO Pickup #12572654
    • Designed for 5-58/8" Deep 15-276 front sump oil pan
    • Two-sided flange for improved stability
    • Comes with o-ring seal
    • TIG welded for strength and durability
  • The 15-277 LS1-LS6 front sump pickup is designed to replace and improve upon the discontinued GM GTO Pickup #12572654. The pickup comes with an upgraded two sided mounting flange and an o-ring seal to eliminate potential leaks. It is tig welded for strength and durability. Designed to work with our front sump LS1-LS6 oil pan #15-276.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Canton
Additional Fitment Information:
Vehicle
Holley
Fuel Tank Pickup Holley

P311-5CA9541    16-203  New

Qty:
In Stock & Ready to Ship
$48.28
Holley Fuel Tank Pickup
  • HydraMat Install Kit
  • HydraMat Install Kit; Magnet Kit; Includes 4 Magnets w/Integrated 4-40 Mounting Studs/Nuts And Washers;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Magnet With Integrated Mounting Stud
    • Easy Installation
    • Available In 4-40 and 6-32 Stud Configurations
    • 4-40 Kit Provides 15 lbs.. Of Mounting Strength Per Magnet
    • Kit Includes 4 Magnets Nuts and Washers
  • The HydraMat magnet kits are designed as a cost effective solution for mounting the Holley HydraMat in the fuel tank or cell. Ideal for use in fuel tanks with a small sender opening where the Click Bond kits cannot be used. Once installed, the magnets can be positioned so the HydraMat lays flat in the bottom of the fuel tank.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Equus
Tachometer Sensor Equus

P311-4FC7B44    E9995  New

Qty:
In Stock & Ready to Ship
$34.22
Equus Tachometer Sensor
  • SENSOR; TACHOMETER INDUCTIVE PICKUP
  • Replacement Inductive Pickup for Tachometers
  • Product Attributes:
    • Overall Height: 2.400 In.
    • Overall Length: 1.400 In.
    • Overall Width: 1.250 In.
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Dinp; Which Is Known To The State Of California To Cause Cancer.
    • Wiring Harness Included: Yes
  • Features:
    • For All EQUUS® 3-3/8 in. and 5 in. Tachometers
  • Replacement inductive pickup sensor and wiring harness for Equus 3-3/8 in. and 5 in. performance tachometers using indirect ignition signal connections and coil on plug ignition installations where a tachometer signal port is unavailable.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Equus
Additional Fitment Information:
Vehicle
Holley
Fuel Tank Pickup Holley

P311-5BA3465    16-101  New

Qty:
In Stock & Ready to Ship
$330.68
Holley Fuel Tank Pickup
  • HydraMat Fuel Reservoir System
  • HydraMat Fuel Reservoir System; 15 in. Long x 8 in. Wide Cross; 15 Micron; Center Outlet 3/8 in. NPT;
  • Product Attributes:
    • Fitting Size: 0.375 In. Npt
    • Length: 15.000 In.
    • Micron Rating: 15
    • Outlet Position: Center
    • Product Length: 15.000 In.
    • WARNING CA Proposition 65: No
    • Width: 8.000 In.
  • Features:
    • Patent Pending Solves Problems w/Traditional Fuel Pick-Ups
    • Reduces Potential For Air To Enter Fuel System
    • Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
    • Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel
    • Area Of Hydramat Is Uncovered Tiny Pores In Media Seal
    • Internal Reservoir Assists Fuel Available At The Pickup
    • Eliminates Specialty Reservoirs Sumps/Pick Up Pumps
    • No Need For A Separate Filter Before The Fuel Pump
    • Can Be Folded and Compressed For Easy Install
    • Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells
  • The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Tank Pickup Holley

P311-14FAE49    16-102  New

Qty:
In Stock & Ready to Ship
$330.68
Holley Fuel Tank Pickup
  • HydraMat Fuel Reservoir System
  • HydraMat Fuel Reservoir System; 15 in. Long x 8 Wide in. Cross; 15 Micron; Offset Outlet 3/8 in. NPT;
  • Product Attributes:
    • Fitting Size: 0.375 In. Npt
    • Length: 15.000 In.
    • Micron Rating: 15
    • Outlet Position: Offset
    • Product Length: 15.000 In.
    • WARNING CA Proposition 65: No
    • Width: 8.000 In.
  • Features:
    • Patent Pending Solves Problems w/Traditional Fuel Pick-Ups
    • Reduces Potential For Air To Enter Fuel System
    • Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
    • Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel
    • Area Of Hydramat Is Uncovered Tiny Pores In Media Seal
    • Internal Reservoir Assists Fuel Available At The Pickup
    • Eliminates Specialty Reservoirs Sumps/Pick Up Pumps
    • No Need For A Separate Filter Before The Fuel Pump
    • Can Be Folded and Compressed For Easy Install
    • Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells
  • The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Tank Pickup Holley

P311-31118A3    16-107  New

Qty:
In Stock & Ready to Ship
$513.37
Holley Fuel Tank Pickup
  • HydraMat Fuel Reservoir System
  • HydraMat Fuel Reservoir System; 15 in. x 15 in. Square; 15 Micron; Center Outlet 1/2 in. NPT;
  • Product Attributes:
    • Fitting Size: 0.5 In. Npt
    • Length: 15.000 In.
    • Micron Rating: 15
    • Outlet Position: Center
    • Product Length: 15.000 In.
    • WARNING CA Proposition 65: No
    • Width: 15.000 In.
  • Features:
    • Patent Pending Solves Problems w/Traditional Fuel Pick-Ups
    • Reduces Potential For Air To Enter Fuel System
    • Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
    • Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel
    • Area Of Hydramat Is Uncovered Tiny Pores In Media Seal
    • Internal Reservoir Assists Fuel Available At The Pickup
    • Eliminates Specialty Reservoirs Sumps/Pick Up Pumps
    • No Need For A Separate Filter Before The Fuel Pump
    • Can Be Folded and Compressed For Easy Install
    • Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells
  • The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Tank Pickup Holley

P311-20917C8    16-111  New

Qty:
In Stock & Ready to Ship
$259.12
Holley Fuel Tank Pickup
  • HydraMat Fuel Reservoir System
  • HydraMat Fuel Reservoir System; 3 in. x 15 in. Rectangle; 11mm Outlet;
  • Product Attributes:
    • Length: 15.000 In.
    • Micron Rating: 15
    • Product Length: 15.000 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Patent Pending Design
    • Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
    • Unique Internal Reservoir Keeps Fuel Available At Pickup
    • Pin Locking For Removal/Reposition w/o Damage/Loss Of Retention
    • Outlet Has 6 Positions To Orient The Hydramat In The Fuel Cell
    • Greatly Reduces Potential For Air To Enter Into The Fuel System
    • SurfaceTension/Wicking Allow Fuel Draw w/Mat Uncovered
    • Tiny Pores Seal Off w/Surface Tension Fuel From Other Area Of Mat
    • No Specialty Reservoirs/Sumps/PickUp Pumps Saving Cost/Complexity
    • No Need For A Separate Filter Before The Fuel Pump
  • Holleys latest Hydramat design has an 11mm outlet that connects to the TI 450LPH and other pumps that use the same attachment design. The outlet has 6 lock pin positions to allow you to index the Hydramat on the fuel pump for custom applications depending on your fuel tank or cell setup. The multiple pin locking feature on the pump inlet allows for removal and repositioning without damage or loss of retention. This is a huge advantage over the one use only filter socks that are included with most pumps.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
MSD
Distributor Ignition Pickup MSD

P311-1661F84    2346  New

Qty:
In Stock & Ready to Ship
$175.90
MSD Distributor Ignition Pickup
  • Cam Sync Pickup
  • Cam Sync Pickup; Universal; Includes Non Magnetic Pickup/0.250 in. x 0.200 in. Magnet/Connectors;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Supplied w/Non-Magnetic Pickup And Magnet
  • This Universal Cam Sync pickup Kit is supplied with a non-magnetic pickup and a magnet that you install to any part that operates at camshaft speed. When the magnet passes the pickup, a signal is created to alert the ECU of the position and firing order of the engine. Matching connectors are supplied and the magnet measures .250 x .200. You will need to fabricate a bracket assembly and install the magnet

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
Holley
Fuel Tank Pickup Holley

P311-5BDA77B    16-106  New

Qty:
In Stock & Ready to Ship
$398.06
Holley Fuel Tank Pickup
  • HydraMat Fuel Reservoir System
  • HydraMat Fuel Reservoir System; 11 in. x 11 in. Square; 15 Micron; Center Outlet 1/2 in. NPT;
  • Product Attributes:
    • Fitting Size: 0.5 In. Npt
    • Length: 11.000 In.
    • Micron Rating: 15
    • Outlet Position: Center
    • Product Length: 11.000 In.
    • WARNING CA Proposition 65: No
    • Width: 11.000 In.
  • Features:
    • Patent Pending Solves Problems w/Traditional Fuel Pick-Ups
    • Reduces Potential For Air To Enter Fuel System
    • Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
    • Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel
    • Area Of Hydramat Is Uncovered Tiny Pores In Media Seal
    • Internal Reservoir Assists Fuel Available At The Pickup
    • Eliminates Specialty Reservoirs Sumps/Pick Up Pumps
    • No Need For A Separate Filter Before The Fuel Pump
    • Can Be Folded and Compressed For Easy Install
    • Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells
  • The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
MSD
Ignition Crank Trigger Sensor MSD

P311-24CB73B    8278  New

Qty:
In Stock & Ready to Ship
$186.51
MSD Ignition Crank Trigger Sensor
  • Hall Effect Crank Trigger Pickup Sensor
  • Hall Effect Crank Trigger Pickup Sensor; 3/4 x 16 in. Threaded;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Most Accurate Way To Trigger Your Electronic Fuel Injection
    • Effect Sensor That Is Less Susceptible To Noise Interference
    • Supplied With Mating 3 Pin Connector And Pins And Seals
  • PN 8278 is the replacement Hall Effect Sensor for flying magnet crank trigger setups using a 3/4-16 threaded. This sensor is a Hall Effect sensor, meaning it outputs a square wave signal, which is ideal for use with most Electronic Fuel Injection Systems. This sensor is to only be used with a trigger wheel with flying magnets. It does not detect a ferrous steel target.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle

Showing 11 - 20 of 46 Products.