Finish Selecting Your Vehicle

Choose a Year for your Chevrolet Caprice

  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 1996
  • 1995
  • 1994
  • 1993
  • 1992
  • 1991
  • 1990
  • 1989
  • 1988
  • 1987
  • 1986
  • 1985
  • 1984
  • 1983
  • 1982
  • 1981
  • 1980
  • 1979
  • 1978
  • 1977
  • 1976
  • 1975
  • 1974
  • 1973
  • 1972
  • 1971
  • 1970
  • 1969
  • 1968
  • 1967
  • 1966
Show More Years

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • COMP Cams
    COMP Cams
  • Dorman
    Dorman
  • Ford Racing
    Ford Racing
  • MTC
    MTC
  • Proform
    Proform
  • Trans-dapt
    Trans-dapt

Showing Products For Chevrolet Caprice Engine Valve Cover

Below are all the different brands and applications for Chevrolet Caprice Engine Valve Cover

Showing Products for an Incomplete Vehicle

The products shown below are for a Chevrolet Caprice, but you are missing a Year for your vehicle. Please pick a Year above to get the best fitment for the products below.


Showing 1 - 10 of 87 Products for Engine Valve Cover.

Refine Your Search

ACDelco
2013 Chevrolet Caprice Engine Valve Cover - Left 6 Cyl 3.6L ACDelco

P311-4051F31    W0133-2622709  New

Qty:
In Stock & Ready to Ship
$239.93
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
  • Includes Cover, Insulator, Seals, Bolt, PCV Fitting, Insert
Brand: ACDelco
Position: Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2013 - Chevrolet Caprice Left V 6 Cyl 3.6L 217 3564
ACDelco
2012 Chevrolet Caprice Engine Valve Cover - Right 8 Cyl 6.0L ACDelco

P311-5B79B54    W0133-3066104  New

Qty:
In Stock & Ready to Ship
$139.88
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
Brand: ACDelco
Position: Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2012 - Chevrolet Caprice Right V 8 Cyl 6.0L 364 5967
Proform
1976 Chevrolet Caprice Engine Valve Cover 8 Cyl 5.7L Proform

P311-3820E21    141-784  New

Qty:
In Stock & Ready to Ship
$128.73
  • Engine Valve Covers; Stamped Steel; Tall; Orange with Bowtie Logo; Fits SB Chevy
  • Stamped Steel;Orange with Bowtie Logo; Fits SB Chevy; Mounting Bolt(s) Included:No; Valve Cover Bolt Pattern:Perimeter Bolt; Valve Cover Height:Tall
  • Engine Valve Cover; Stamped Steel Tall Style With Baffles; Orange Epoxy Finish With Black Chevy and Bowtie Logos; Fits 1955 to 1986 262-400 Small Block Chevy Engines; Made From Quality Material; Officially Licensed GM Product; Sold As Pair
  • Product Attributes:
    • Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986
    • Baffeled: Yes
    • Breather Grommet Included: Yes
    • Category: Valve Covers
    • Emblem: Chevrolet & Bowtie Emblem
    • Engine: Chevy Sb Gen 1
    • Feature/Benefit: Latest Look!
    • Make: Chevrolet
    • Mounting Bolt(s) Included: No
    • PCV Grommet Included: Yes
    • Valve Cover Bolt Pattern: Perimeter Bolt
    • Valve Cover Height: Tall
  • Latest Look! For Chevrolet small-block engines, V8, 1958-86. These tall stamped steel valve covers are electrostatically painted and baked with a durable high-tech, orange epoxy, and finished with the famous Chevrolet and Bowtie emblems.
Brand: Proform
Additional Fitment Information:
Vehicle Block Engine CID CC
1976 - Chevrolet Caprice V 8 Cyl 5.7L 350 -
Proform
1966 Chevrolet Caprice Engine Valve Cover 8 Cyl 6.5L Proform

P311-3C26ACD    141-787  New

Qty:
In Stock & Ready to Ship
$166.75
  • Engine Valve Covers; Stamped Steel; Tall; Orange; with Bowtie Logo; Fits BB Chevy
  • Stamped Steel;Orange; with Bowtie Logo; Fits BB Chevy; Mounting Bolt(s) Included:No; Valve Cover Bolt Pattern:Perimeter Bolt; Valve Cover Height:Tall
  • Engine Valve Cover; Stamped Steel Tall Style With Baffles; Chevy Orange With Black Chevy and Bowtie Logos; Fits 1965 to 1996 396-454 Big Block Chevys; Made From Quality Material; Officially Licensed GM Product; Sold As One Pair
  • Product Attributes:
    • Applications: Chevy Big Block 396 To 454 Engines 1965 To 1996
    • Baffeled: Yes
    • Breather Grommet Included: Yes
    • Category: Valve Covers
    • Emblem: Chevrolet & Bowtie Emblem
    • Engine: Chevy Big Block
    • Feature/Benefit: Latest Look!
    • Make: Chevrolet
    • Mounting Bolt(s) Included: No
    • PCV Grommet Included: Yes
    • Technical Note: Chev Valve Covers And Valve Covers With Baffles Will Not Clear Most Stud Girdles
    • Valve Cover Bolt Pattern: Perimeter Bolt
    • Valve Cover Height: Tall
  • Latest Look! For Chevrolet big-block engines, V8, 1965-96. These tall stamped steel valve covers are electrostatically painted and baked with a durable high-tech, orange epoxy, and finished with the famous Chevrolet and Bowtie emblems. These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy valve covers and valve covers with baffles will not clear most stud girdle applications.
Brand: Proform
Additional Fitment Information:
Vehicle Block Engine CID CC
1966 - Chevrolet Caprice V 8 Cyl 6.5L 396 6489
Proform
1966 Chevrolet Caprice Engine Valve Cover 8 Cyl 6.5L Proform

P311-5181C34    141-789  New

Qty:
In Stock & Ready to Ship
$151.64
  • Engine Valve Covers; Stamped Steel; Short; Orange; with Bowtie Logo; Fits BB Chevy
  • Stamped Steel; Short; Orange; with Bowtie Logo; Fits BB Chevy; Mounting Bolt(s) Included:No; Valve Cover Bolt Pattern:Perimeter Bolt; Valve Cover Height:Stock
  • Engine Valve Cover; Stamped Steel Short Style With Baffles; Chevy Orange Finish With Black Chevy and Bowtie Logos; Fits 1965 to 1996 396-454 Big Block Chevy's; Made From Quality Material; Officially Licensed GM Product; Sold As One Pair
  • Product Attributes:
    • Applications: Chevy Big Block 396 To 454 Engines 1965 To 1996
    • Baffeled: Yes
    • Breather Grommet Included: Yes
    • Category: Valve Covers
    • Emblem: Chevrolet & Bowtie Emblem
    • Engine: Chevy Big Block
    • Feature/Benefit: Latest Look!
    • Make: Chevrolet
    • Mounting Bolt(s) Included: No
    • PCV Grommet Included: Yes
    • Technical Note: Chev Valve Covers And Valve Covers With Baffles Will Not Clear Most Stud Girdles
    • Valve Cover Bolt Pattern: Perimeter Bolt
    • Valve Cover Height: Stock
  • Latest Look! For Chevrolet big-block engines, V8, 1965-96. These short stamped steel valve covers are electrostatically painted and baked with a durable high-tech, orange epoxy, and finished with the famous Chevrolet and Bowtie emblems. These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy valve covers and valve covers with baffles will not clear most stud girdle applications.
Brand: Proform
Additional Fitment Information:
Vehicle Block Engine CID CC
1966 - Chevrolet Caprice V 8 Cyl 6.5L 396 6489
Proform
1968 Chevrolet Caprice Engine Valve Cover 8 Cyl 7.0L Proform

P311-0AF4D30    141-810  New

Qty:
In Stock & Ready to Ship
$152.04
  • Engine Valve Covers; Stamped Steel; Short; Black; with Bowtie Logo; Fits BB Chevy
  • Stamped Steel; Short; Black; with Bowtie Logo; Fits BB Chevy; Mounting Bolt(s) Included:No; Valve Cover Bolt Pattern:Perimeter Bolt; Valve Cover Height:Stock; Emblem Style:Recessed Red Emblem
  • Engine Valve Cover; Stamped Steel Short Style With Baffles; Black Crinkle Finish With Red Chevy and Bowtie Logo; Fits 1965 to 1996 396-454 Big Block Chevys; Made From Quality Material; Officially Licensed GM Product; Sold As One Pair
  • Product Attributes:
    • Applications: Chevy Big Block 396 To 454 Engines 1965 To 1996
    • Baffeled: Yes
    • Breather Grommet Included: Yes
    • Category: Valve Covers
    • Emblem: Chevrolet & Bowtie Emblem
    • Emblem Style: Recessed Red Emblem
    • Engine: Chevy Big Block
    • Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers, Greatly Reducing The Likelihood Of Leakage Around The Valve Cover Flange Area Caused By Fasteners Being Over-torqued.
    • Make: Chevrolet
    • Mounting Bolt(s) Included: No
    • PCV Grommet Included: Yes
    • Technical Note: Chev Valve Covers And Valve Covers With Baffles Will Not Clear Most Stud Girdles
    • Valve Cover Bolt Pattern: Perimeter Bolt
    • Valve Cover Height: Stock
  • These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height valve covers and valve covers with baffles will not clear most stud girdle applications. Chevy big-block or B/B refers to 1965-1996 engines.
Brand: Proform
Additional Fitment Information:
Vehicle Block Engine CID CC
1968 - Chevrolet Caprice V 8 Cyl 7.0L 427 6998
Proform
1970 Chevrolet Caprice Engine Valve Cover 8 Cyl 6.6L Proform

P311-4375239    141-811  New

Qty:
In Stock & Ready to Ship
$161.29
  • Engine Valve Covers; Stamped Steel; Tall; Black; with Bowtie Logo; Fits BB Chevy
  • Stamped Steel;Black; with Bowtie Logo; Fits BB Chevy; Mounting Bolt(s) Included:No; Valve Cover Bolt Pattern:Perimeter Bolt; Valve Cover Height:Tall; Emblem Style:Recessed Red Emblem
  • Engine Valve Cover; Stamped Steel Tall Style With Baffles; Black Crinkle Finish With Red Chevy and Bowtie Logo; Fits 1965 to 1996 396-454 Big Block Chevys; Made From Quality Material; Officially Licensed GM Product; Sold As One Pair
  • Product Attributes:
    • Applications: Chevy Big Block 396 To 454 Engines 1965 To 1996
    • Baffeled: Yes
    • Breather Grommet Included: Yes
    • Category: Valve Covers
    • Emblem: Chevrolet & Bowtie Emblem
    • Emblem Style: Recessed Red Emblem
    • Engine: Chevy Big Block
    • Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers, Greatly Reducing The Likelihood Of Leakage Around The Valve Cover Flange Area Caused By Fasteners Being Over-torqued.
    • Make: Chevrolet
    • Mounting Bolt(s) Included: No
    • PCV Grommet Included: Yes
    • Technical Note: Will Clear Stud Girdles If The Oem Baffle Is Removed.
    • Valve Cover Bolt Pattern: Perimeter Bolt
    • Valve Cover Height: Tall
  • These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height valve covers and valve covers with baffles will not clear most stud girdle applications. Chevy big-block or B/B refers to 1965-1996 engines.
Brand: Proform
Additional Fitment Information:
Vehicle Block Engine CID CC
1970 - Chevrolet Caprice V 8 Cyl 6.6L 402 6588
Proform
1968 Chevrolet Caprice Engine Valve Cover 8 Cyl 7.0L Proform

P311-3D2F96C    141-813  New

Qty:
In Stock & Ready to Ship
$165.77
  • Engine Valve Covers; Stamped Steel; Tall; Chrome; with Bowtie Logo; Fits BB Chevy
  • Stamped Steel;Chrome; with Bowtie Logo; Fits BB Chevy; Mounting Bolt(s) Included:No; Emblem Style:Recessed Red and Black Emblem; Valve Cover Bolt Pattern:Perimeter Bolt; Valve Cover Height:Tall
  • Engine Valve Cover; Stamped Steel Tall Style With Baffles; Chrome Plated Finish With Black Chevy and Red Bowtie Logos; Fits 1965 to 1996 396-454 Big Block Chevys; Made From Quality Material; Officially Licensed GM Product; Sold As One Pair
  • Product Attributes:
    • Applications: Chevy Big Block 396 To 454 Engines 1965 To 1996
    • Baffeled: Yes
    • Breather Grommet Included: Yes
    • Category: Valve Covers
    • Emblem: Chevrolet & Bowtie Emblem
    • Emblem Style: Recessed Red & Black Emblem
    • Engine: Chevy Big Block
    • Feature/Benefit: These Chevrolet Bowtie Valve Covers Are Made Of Heavy-gauge Steel, 20% Thicker Than Typical Aftermarket Valve Covers, Greatly Reducing The Likelihood Of Leakage Around The Valve Cover Flange Area Caused By Fasteners Being Over-torqued.
    • Make: Chevrolet
    • Mounting Bolt(s) Included: No
    • PCV Grommet Included: Yes
    • Technical Note: Chev Valve Covers And Valve Covers With Baffles Will Not Clear Most Stud Girdles
    • Valve Cover Bolt Pattern: Perimeter Bolt
    • Valve Cover Height: Tall
  • These CHEVROLET Bowtie valve covers are made of heavy-gauge steel, 20% thicker than typical aftermarket valve covers, greatly reducing the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. The chrome plating meets GM quality specifications. All valve covers bear the powerful Bowtie and CHEVROLET Emblems. Stamped valve covers are offered in either tall or production height (short). Oil restricting baffles are offered in many valve covers for those who wish to maintain the PCV hookup. All valve covers are sold in pairs, equipped with air breather and PCV grommets, unless specified otherwise. Technical Note: Production height Chevy valve covers and valve covers with baffles will not clear most stud girdle applications. Chevy big-block or B/B refers to 1965-1996 engines.
Brand: Proform
Additional Fitment Information:
Vehicle Block Engine CID CC
1968 - Chevrolet Caprice V 8 Cyl 7.0L 427 6998
Proform
1989 Chevrolet Caprice Engine Valve Cover 8 Cyl 5.0L Proform

P311-4C35F3E    141-840  New

Qty:
In Stock & Ready to Ship
$337.01
  • Valve Covers; SBC; 87-Pre LS; Ctr Bolt; Tall; Alum; Blk Crinkle; Raised Emblems
  • SBC; Blk Crinkle;Mounting Bolt(s) Included:Yes; Emblem Style:Raised/Milled Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Tall; Material:Die Cast Aluminum
  • Engine Valve Covers; Slant-Edge Tall Style With Baffles; Black Crinkle With Raised Chevy and Bowtie Logos; Fits 1987 to Pre LS Small Block Chevy Engines; Made From Die Cast Aluminum; Officially Licensed GM Product; Sold As Pair
  • Product Attributes:
    • Applications: Chevy Small Block Engines 1987 To Pre Ls
    • Baffeled: Yes
    • Breather Grommet Included: Yes
    • Category: Valve Covers
    • Emblem: Chevrolet & Bowtie Emblem
    • Emblem Style: Raised/milled Emblem
    • Engine: Chevy Sb Gen 2 Vortec
    • Feature/Benefit: Slant-edge Aluminum Design
    • Make: Chevrolet
    • Mounting Bolt(s) Included: Yes
    • Part Type: Valve Cover
    • PCV Grommet Included: Yes
    • Valve Cover Bolt Pattern: Center Bolt
    • Valve Cover Height: Tall
  • The center bolt family of valve covers now can enjoy the wildly popular Slant-Edge look that Gen 1 and LS enthusiasts have been enjoying. Generous internal clearance for larger valve train setups, and raised emblems are the distinctive features of these new valve covers. Tall, with removable baffle. Grommets, and mounting bolts included. Sold in Pairs. U.S. Pat. D727,362.
Brand: Proform
Additional Fitment Information:
Vehicle Block Engine CID CC
1989 - Chevrolet Caprice V 8 Cyl 5.0L 305 -
Proform
1992 Chevrolet Caprice Engine Valve Cover 8 Cyl 5.0L Proform

P311-157475A    141-841  New

Qty:
In Stock & Ready to Ship
$337.01
  • Valve Covers; SBC; 87-Pre LS; Ctr Bolt; Tall; Alum; Orange; Raised Emblems
  • SBC;Orange;Mounting Bolt(s) Included:Yes; Emblem Style:Raised/Milled Emblem; Valve Cover Bolt Pattern:Center Bolt; Valve Cover Height:Tall; Material:Die Cast Aluminum
  • Engine Valve Covers; Slant-Edge Tall Style With Baffles; Chevy Orange With Raised Chevy and Bowtie Logos; Fits 1987 to Pre LS Small Block Chevy Engines; Made From Die Cast aluminum; Officially Licensed GM Product; Sold As Pair
  • Product Attributes:
    • Applications: Chevy Small Block Engines 1987 To Pre Ls
    • Baffeled: Yes
    • Breather Grommet Included: Yes
    • Category: Valve Covers
    • Emblem: Chevrolet & Bowtie Emblem
    • Emblem Style: Raised/milled Emblem
    • Engine: Chevy Sb Gen 2 Vortec
    • Feature/Benefit: Slant-edge Aluminum Design
    • Make: Chevrolet
    • Mounting Bolt(s) Included: Yes
    • Part Type: Valve Cover
    • PCV Grommet Included: Yes
    • Valve Cover Bolt Pattern: Center Bolt
    • Valve Cover Height: Tall
  • The center bolt family of valve covers now can enjoy the wildly popular Slant-Edge look that Gen 1 and LS enthusiasts have been enjoying. Generous internal clearance for larger valve train setups, and raised emblems are the distinctive features of these new valve covers. Tall, with removable baffle. Grommets, and mounting bolts included. Sold in Pairs. U.S. Pat. D727,362.
Brand: Proform
Additional Fitment Information:
Vehicle Block Engine CID CC
1992 - Chevrolet Caprice V 8 Cyl 5.0L 305 -

Showing 1 - 10 of 87 Products for Engine Valve Cover.