Finish Selecting Your Vehicle

Choose a Year for your Sterling Truck Acterra 5500

  • 2007
  • 2006
  • 2005
  • 2004
  • 2003
  • 2002
  • 2001

Shop By Brand

The Following brands are available based on your search.

  • Bilstein
    Bilstein
  • Fox Racing Shox
    Fox Racing Shox
  • Monroe
    Monroe
  • PRT
    PRT
  • Qa1
    Qa1

Showing Products For Sterling Truck Acterra 5500 Shock Absorber

Below are all the different brands and applications for Sterling Truck Acterra 5500 Shock Absorber

Showing Products for an Incomplete Vehicle

The products shown below are for a Sterling Truck Acterra 5500, but you are missing a Year for your vehicle. Please pick a Year above to get the best fitment for the products below.


Showing 1 - 10 of 131 Products for Shock Absorber.

Refine Your Search

PRT
2002 Sterling Truck Acterra 5500 Shock Absorber - Rear 6 Cyl 5.9L PRT - PRT Shock Absorber

P311-533CF32    170132  New

Qty:
In Stock & Ready to Ship
$46.67
PRT Shock Absorber  Rear
  • Replaces OE Part Number(s) 680611, 1615817000, 1618708000; With FAS II Airliner Suspension
  • PRT Shock Absorber
  • Product Attributes:
    • Adjustable: No
    • Body Diameter: 2.38
    • Boot Included: No
    • Coil Over Springs Included: No
    • Compressed Length: 14.84
    • Dust Shield: Yes
    • Dust Shield Material: Metal
    • Extended Length: 22.87
    • Gas Charged: Yes
    • Lower Mount Type: Loop
    • Shock Absorber Body End Measuring Point: Center Of The Loop
    • Shock Absorber Rod End Measuring Point: Center Of The Loop
    • Shock Stroke: 8.03
    • Travel Length: 8.03
    • Upper Mount Type: Loop
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: PRT
Position: Rear
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2002 - Sterling Truck Acterra 5500 Rear L 6 Cyl 5.9L 359 -
Monroe
2002 Sterling Truck Acterra 5500 Shock Absorber - Front Monroe - Monroe Magnum Shock Absorber

P311-1BD5F1C    65162  New

1013592000 , 58913007 , 58913008 , 58913009 , 58913009L , 58913011

Qty:
In Stock & Ready to Ship
$82.26
Monroe Shock Absorber  Front
  • Gas-Magnum 65 Shock Absorber
  • Shocks are 1.75 in Bore with 10,000 lb to 12,000 lb Front Axle with 3 in Taperleaf Suspension Replaces OE #(s) 1013592000
  • Monroe Shocks & Struts Gas-Magnum 65 65162 Shock Absorber
  • Monroe Magnum Shock Absorber
  • The Monroe® Magnum™ shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today's heavy truck suspension systems. Its extra-large piston bore is engineered to handle the demands of high mileage and severe use. When combined, the gas charge and large-bore provide the consistent control necessary for demanding truck suspensions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Monroe
Position: Front
Additional Fitment Information:
Vehicle Position
2002 - Sterling Truck Acterra 5500 Front
Monroe
2005 Sterling Truck Acterra 5500 Shock Absorber - Front Monroe - Monroe Magnum Shock Absorber

P311-2F12BE8    65482  New

341627 , 579052 , 665190 , 6803230300 , 680617 , 85337

Qty:
In Stock & Ready to Ship
$80.28
Monroe Shock Absorber  Front
  • Gas-Magnum 65 Shock Absorber
  • Shocks are 1.75 in Bore with 10,000 lb to 12,000 lb Front Axle Replaces OE #(s) 6803230300
  • Monroe Shocks & Struts Gas-Magnum 65 65482 Shock Absorber
  • Monroe Magnum Shock Absorber
  • The Monroe® Magnum™ shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today's heavy truck suspension systems. Its extra-large piston bore is engineered to handle the demands of high mileage and severe use. When combined, the gas charge and large-bore provide the consistent control necessary for demanding truck suspensions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Monroe
Position: Front
Additional Fitment Information:
Vehicle Position
2005 - Sterling Truck Acterra 5500 Front
Monroe
2005 Sterling Truck Acterra 5500 Shock Absorber - Rear Monroe - Monroe Magnum Shock Absorber

P311-5DFCF31    65490  New

1613957000 , 1615817000 , 1618708000 , 1620716000 , 341628 , 441602 , 471700002809 , 680339 , 680611 , 85724 , 89443

Qty:
In Stock & Ready to Ship
$65.31
Monroe Shock Absorber  Rear
  • Gas-Magnum 65 Shock Absorber
  • Shocks are 1.75 in Bore FAS II Airliner Suspension
  • Monroe Shocks & Struts Gas-Magnum 65 65490 Shock Absorber
  • Monroe Magnum Shock Absorber
  • The Monroe® Magnum™ shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today's heavy truck suspension systems. Its extra-large piston bore is engineered to handle the demands of high mileage and severe use. When combined, the gas charge and large-bore provide the consistent control necessary for demanding truck suspensions
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Monroe
Position: Rear
Additional Fitment Information:
Vehicle Position
2005 - Sterling Truck Acterra 5500 Rear
Qa1
Shock Absorber Qa1

P311-599856E    2694M  New

Qty:
In Stock & Ready to Ship
$189.95
  • Shock, Monotube, Large Steel 15.10 -24.60 Eye-B/Eye-B V4-4M
  • 26 Series monotube shock with hyperscrew. Compressed height of 15.4", extended height of 24.63". Eyelet top and eyelet bottom, with a valving of 4-4M.
  • The 26 Series shock is a one piece monotube shock that is well suited for a variety of track conditions or as a traction shock in various applications. Constructed with a zinc plated body for corrosion resistance, this shock is a popular choice for modifieds, late models, super stocks and various other classes. Works best on rough tracks and as an easy-up shock on many dirt cars, and on bumpy asphalt tracks in all banking types. Made with a 2'' O.D. zinc plated steel monotube body and available with hyperscrew, sealed Hyperscrew (IMCalifornia Legal) or Schrader valve configurations, the 26 Series shocks use deflective disc valving with either linear, digressive or linear/digressive valving. The hyperscrew equipped shocks have a threaded round port near the bearing end of the shock body. This hole is then sealed with a small screw that has an O-ring built into it, sealing the nitrogen gas pressure inside the shock. The gas pressure of the sealed hyperscrew configurations is only adjustable by QA1 and QA1 Authorized Rebuilders per sanctioning body, like IMCA, and track rules. With a Schrader valve you can easily adjust your gas pressure. Much like adding air to your car tires, the Schrader valve allows you to make ''on the fly'' gas pressure adjustments between heat races and features to adjust for varying track conditions. The 46 MM piston allows for maximum car control at all shaft velocities. They are racer rebuildable and revalveable for unparalleled repeatability. Made in the USA and 100% dyno tested and serialized.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Qa1
Shock Absorber Qa1

P311-1CC861F    8252  New

Qty:
In Stock & Ready to Ship
$177.88
  • Shock Sml Alum C-O 10.38 15.75 Eye-B/Eye-B V2-2
  • 82 Series aluminum threaded small body twin tube shock. Compressed height of 10.63", extended height of 15.75". Eyelet top and eyelet bottom, with a valving of 2-2.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Monroe
Shock Absorber Monroe

P311-4DF503D    RS7034  New

Qty:
In Stock & Ready to Ship
$85.25

    This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Monroe
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-124B8C9    AK1051  New

Qty:
In Stock & Ready to Ship
$103.73
Bilstein Shock Absorber
  • AK Series-Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Stock Mount Smooth Body
    • Body Diameter (ID): 46mm
    • Body Inside Diameter: 46mm
    • Body Material: Steel
    • Boot Included: No
    • Collapsed Length:
      • 210mm
      • 8.270 In.
    • Collapsed Length (MM): 210.0
    • Compression @0.26m/s: 1360
    • Extended Length:
      • 11.930 In.
      • 303mm
    • Finish: Yellow Paint
    • Internal Design: Monotube
    • Lower Mount Type: Bar Pin
    • Piston Type: Linear
    • Rebound @0.26m/s: 2800
    • Series: Ak Series
    • Shock Stroke: 3.660 In.
    • Title: Bilstein Shock Absorbers
    • Upper Mount Type: Stem
    • Valving Identifier: 393/172
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Bilstein AK Series
    • Ideal Choice For The Racer
    • Maintains Original Suspension Configuration
    • Sealed Unit
    • Bilstein Famous Consistent Fade Free Performance
  • Bilstein AK Series shock absorbers are designed for motorsports applications that require the use of the OE mounting components. Each shock absorber features a monotube design with steel spring valve discs for consistent, fade free performance and superior durability. AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-3AA6554    AK1053  New

Qty:
In Stock & Ready to Ship
$103.73
Bilstein Shock Absorber
  • AK Series-Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Stock Mount Smooth Body
    • Body Diameter (ID): 46mm
    • Body Inside Diameter: 46mm
    • Body Material: Steel
    • Boot Included: No
    • Collapsed Length:
      • 234mm
      • 9.210 In.
    • Collapsed Length (MM): 234.0
    • Compression @0.26m/s: 730
    • Extended Length:
      • 14.110 In.
      • 358.5mm
    • Finish: Yellow Paint
    • Internal Design: Monotube
    • Lower Mount Type: Bar Pin
    • Piston Type: Linear
    • Rebound @0.26m/s: 2515
    • Series: Ak Series
    • Shock Stroke: 4.900 In.
    • Title: Bilstein Shock Absorbers
    • Upper Mount Type: Stem
    • Valving Identifier: 565/164
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Bilstein AK Series
    • Ideal Choice For The Racer
    • Maintains Original Suspension Configuration
    • Sealed Unit
    • Bilstein Famous Consistent Fade Free Performance
  • Bilstein AK Series shock absorbers are designed for motorsports applications that require the use of the OE mounting components. Each shock absorber features a monotube design with steel spring valve discs for consistent, fade free performance and superior durability. AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle
Bilstein
Shock Absorber Bilstein

P311-4143CFF    AK1195  New

Qty:
In Stock & Ready to Ship
$113.00
Bilstein Shock Absorber
  • AK Series-Shock Absorber
  • 46mm Monotube Shock Absorber
  • Product Attributes:
    • Adjustable Damping: Non-adjustable
    • Body Design: Stock Mount Smooth Body
    • Body Diameter (ID): 46mm
    • Body Inside Diameter: 46mm
    • Body Material: Steel
    • Boot Included: No
    • Collapsed Length:
      • 236mm
      • 9.290 In.
    • Collapsed Length (MM): 236.0
    • Compression @0.26m/s: 1600
    • Extended Length:
      • 13.940 In.
      • 354mm
    • Finish: Yellow Paint
    • Internal Design: Monotube
    • Lower Mount Type: Bar Pin
    • Piston Type: Digressive
    • Rebound @0.26m/s: 2570
    • Series: Ak Series
    • Shock Stroke: 4.650 In.
    • Title: Bilstein Shock Absorbers
    • Upper Mount Type: Stem
    • Valving Identifier: 577/359
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer & Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Bilstein AK Series
    • Ideal Choice For The Racer
    • Maintains Original Suspension Configuration
    • Sealed Unit
    • Bilstein Famous Consistent Fade Free Performance
  • Bilstein AK Series shock absorbers are designed for motorsports applications that require the use of the OE mounting components. Each shock absorber features a monotube design with steel spring valve discs for consistent, fade free performance and superior durability. AK Series shock absorbers are ideal for racers who demand reliable performance that also meets their sanctioning body's mounting requirements.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Bilstein
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 131 Products for Shock Absorber.