Finish Selecting Your Vehicle

Choose a Year for your Chrysler Newport

  • 1981
  • 1980
  • 1979
  • 1978
  • 1977
  • 1976
  • 1975
  • 1974
  • 1973
  • 1972
  • 1971
  • 1970
  • 1969
  • 1968
  • 1967
  • 1966
  • 1965
  • 1964
  • 1963
  • 1962
  • 1961
  • 1960
  • 1959
  • 1956

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Performance
    Ford Performance
  • Holley
    Holley
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Showing Products For Chrysler Newport Engine Intake Manifold

Below are all the different brands and applications for Chrysler Newport Engine Intake Manifold

Showing Products for an Incomplete Vehicle

The products shown below are for a Chrysler Newport, but you are missing a Year for your vehicle. Please pick a Year above to get the best fitment for the products below.


Showing 1 - 10 of 159 Products for Engine Intake Manifold.

Refine Your Search

Weiand
1978 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 5.9L Weiand - Stealth Intake Manifold

P311-29C7E7A    8022WND  New

Qty:
In Stock & Ready to Ship
$456.58
Weiand Engine Intake Manifold  Lower
  • Stealthâ„¢ Intake Manifold
  • Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealthâ„¢ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;
  • Stealth(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6800
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • High Rise/Dual Plane Design
    • Square Bore Carburetor Mounting Flange
    • No EGR Provisions
    • Idle-6800 RPM Power Band
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
  • Stealth Intake Manifold 318 (late style), 340, 360 V8 This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Engine VIN Position Block Engine CID CC
1978 - Chrysler Newport J Lower V 8 Cyl 5.9L 360 -
Weiand
1980 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 5.2L Weiand - Action +Plus Intake Manifold

P311-3DC90FB    8007WND  New

Qty:
In Stock & Ready to Ship
$463.00
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing~Rotary A/C Compressor Will Not Clear On 1978 And Later Applications~Square Bore Carburetors May Require PN[9006] To Seal Properly
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Engine VIN Position Block Engine CID CC
1980 - Chrysler Newport H Lower V 8 Cyl 5.2L 318 5211
Weiand
1956 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 5.8L Weiand - Action +Plus Intake Manifold

P311-3DC90FB    8007WND  New

Qty:
In Stock & Ready to Ship
$463.00
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1956 - Chrysler Newport Lower V 8 Cyl 5.8L 354 5802
Weiand
1966 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 6.3L Weiand - Action +Plus Intake Manifold

P311-141F0F6    8008WND  New

Qty:
In Stock & Ready to Ship
$438.64
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine: Chrysler Big Block V8
    • Engine Make/Size: Chrysler Big Block V8
    • Front Height: 3.620 In.
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Port Size 2.14 in. Height x 1.11 in. Width
    • Height Front 3.62 in.
    • Rear 4.00 in.
    • Medium Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • Action +Plus Intake Manifold 361, 383, 400 V8This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1966 - Chrysler Newport Lower V 8 Cyl 6.3L 383 6286
Weiand
1980 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 5.2L Weiand - Stealthâ„¢ Intake Manifold

P311-29C7E7A    8022WND  New

Qty:
In Stock & Ready to Ship
$456.58
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealthâ„¢ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;
  • Stealthâ„¢ Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6800
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • High Rise/Dual Plane Design
    • Square Bore Carburetor Mounting Flange
    • No EGR Provisions
    • Idle-6800 RPM Power Band
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
  • Stealth Intake Manifold 318 (late style), 340, 360 V8 This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1980 - Chrysler Newport Lower V 8 Cyl 5.2L 318 5211
Weiand
1980 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 5.2L Weiand - Action +Plus Intake Manifold

P311-3DC90FB    8007WND  New

Qty:
In Stock & Ready to Ship
$463.00
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Square Bore Carburetors May Require PN[9006] To Seal Properly~Rotary A/C Compressor Will Not Clear On 1978 And Later Applications~Legal Only For Off-Highway Use Or Racing
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Engine VIN Position Block Engine CID CC
1980 - Chrysler Newport H Lower V 8 Cyl 5.2L 318 5211
Weiand
1979 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 5.9L Weiand - Stealth Intake Manifold

P311-29C7E7A    8022WND  New

Qty:
In Stock & Ready to Ship
$456.58
Weiand Engine Intake Manifold  Lower
  • Stealthâ„¢ Intake Manifold
  • Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Stealthâ„¢ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;
  • Stealth(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6800
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • High Rise/Dual Plane Design
    • Square Bore Carburetor Mounting Flange
    • No EGR Provisions
    • Idle-6800 RPM Power Band
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
  • Stealth Intake Manifold 318 (late style), 340, 360 V8 This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Engine VIN Position Block Engine CID CC
1979 - Chrysler Newport J Lower V 8 Cyl 5.9L 360 -
Weiand
1969 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 6.3L Weiand - Action +Plus Intake Manifold

P311-141F0F6    8008WND  New

Qty:
In Stock & Ready to Ship
$438.64
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; Low Rise; Square Bore Carb. Mounting Flange; 3.62 in. Front H/4.00 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine: Chrysler Big Block V8
    • Engine Make/Size: Chrysler Big Block V8
    • Front Height: 3.620 In.
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Port Size 2.14 in. Height x 1.11 in. Width
    • Height Front 3.62 in.
    • Rear 4.00 in.
    • Medium Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • Action +Plus Intake Manifold 361, 383, 400 V8This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1969 - Chrysler Newport Lower V 8 Cyl 6.3L 383 6286
Weiand
1956 Chrysler Newport Engine Intake Manifold - Lower 8 Cyl 5.8L Weiand - Action +Plus Intake Manifold

P311-3DC90FB    8007WND  New

Qty:
In Stock & Ready to Ship
$463.00
Weiand Engine Intake Manifold  Lower
  • Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
  • Action +Plus Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chrysler Small Block V8
    • Front Height: 4.880 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Rear Height: 5.940 In.
    • RPM Range: Idle-6000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Height Front 4.88 in.
    • Rear 5.94 in.
    • Port Size 1.96 in. Height x 1.00 in. Width
    • High Rise/Dual Plane Design For Maximum Torque
    • Permanent Mold Casting Process
    • Lighter/Smoother/Better Looking/Consistent Casting
    • Dyno Proven To Make 25hp Over Competition
    • Fully CNC Machined For A Perfect Fit
    • Square Bore Carburetor Flange
    • Exhaust Crossover For Improved Street Drivability
  • This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1956 - Chrysler Newport Lower V 8 Cyl 5.8L 354 5802
Edelbrock
1972 Chrysler Newport Engine Intake Manifold 8 Cyl 7.2L Edelbrock - Performer 440 Intake Manifold

P311-35FFE67    2191  New

Qty:
In Stock & Ready to Ship
$407.64
Edelbrock Engine Intake Manifold
  • Performer 440 Intake Manifold for Chrysler, RB Series 413-440 Engines
  • EGR/Non-EGR Idle-5500 rpm For 4 bbl Carbs Recommend Edelbrock Gasket PN[7225] for Manifold Gasket~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
  • Non-EGR. Works with EGR for 1972-79 440 V8s with OEM 4-bbl. carb. Will not fit 1962-64 Max Wedge Heads
  • Performer 440 Intake Manifold
  • Product Attributes:
    • Basic Operating RPM Range: Idle-5500
    • Center Maximum Height: 4.300
    • CNC Ported: No
    • EGR Port: With Or Without
    • Flange Type: 4150
    • Front Maximum Height: 3.800
    • Gasket Or Seal Included: No
    • Grade Type: Performance
    • Rear Maximum Height: 4.800
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Single Or Dual Plane Type: Dual
    • Vehicle Model: Chrysler
  • Edelbrock part #2191 Performer 440 intake manifold is designed for street 413-426-440 c.i.d. Chrysler V8's that measure 8.75" across block. Will not fit 1962-64 Max Wedge heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Engine Version Block Engine CID CC
1972 - Chrysler Newport Custom U/K V 8 Cyl 7.2L 440 7211

Showing 1 - 10 of 159 Products for Engine Intake Manifold.