802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle

Choose a Year for your Infiniti FX35

  • 2012
  • 2011
  • 2010
  • 2009
  • 2008
  • 2007
  • 2006
  • 2005
  • 2004
  • 2003

Shop By Brand

The Following brands are available based on your search.

  • Beck Arnley
    Beck Arnley
  • Cardone
    Cardone
  • Dorman
    Dorman
  • Dynamic Friction
    Dynamic Friction
  • Raybestos
    Raybestos

Showing Products For Infiniti FX35 Brake Master Cylinder

Below are all the different brands and applications for Infiniti FX35 Brake Master Cylinder

Showing Products for an Incomplete Vehicle

The products shown below are for a Infiniti FX35, but you are missing a Year for your vehicle. Please pick a Year above to get the best fitment for the products below.


Showing 11 - 20 of 24 Products for Brake Master Cylinder.

Refine Your Search

Cardone
2009 Infiniti FX35 Brake Master Cylinder Cardone - New Master Cylinder

P311-02FC8FF    13-4182  New

D6010JK51A

Qty:
$134.92
Cardone Brake Master Cylinder
  • with Technology Package; Supplied w/Reservoir
  • New Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 1.000"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Other Port(s) Size: M12 X 1.0
    • Package Contents: Master Cylinder
    • Port Count: 3
    • Primary Port Size: M12 X 1.0
    • Product Condition: New
    • Reservoir Material: Plastic
    • Reservoir Type: Single
    • Secondary Port Size: M12 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
2009 - Infiniti FX35
Cardone
2006 Infiniti FX35 Brake Master Cylinder Cardone - New Master Cylinder

P311-1F2ECE3    13-3116  New

46010CG000 , 46010CG001

Qty:
$138.17
Cardone Brake Master Cylinder
  • Except Adaptive Cruise Control Before 11/2005 ; Supplied w/Reservoir
  • New Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 1.000"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 3
    • Primary Port Size: M12 X 1.0
    • Product Condition: New
    • Reservoir Material: Plastic
    • Reservoir Type: Single
    • Secondary Port Size: M12 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
2006 - Infiniti FX35
Cardone
2003 Infiniti FX35 Brake Master Cylinder Cardone - New Master Cylinder

P311-1F2ECE3    13-3116  New

46010CG000 , 46010CG001

Qty:
$138.17
Cardone Brake Master Cylinder
  • Except Adaptive Cruise Control; Supplied w/Reservoir
  • New Master Cylinder
  • Product Attributes:
    • Bore Diameter (N): 1.000"
    • FAQs:
      • As A Rule, Always Use The Brake Fluid Recommended By The O.e. Which Is Stamped On The Master Cylinder Lid. Note: Always Use New Fluid From A Sealed Container.
      • Check Booster For A Defective Push Rod Seal. If This Seal Is Bad, It Could Drain The Brake Fluid Out Of The Master Cylinder.
      • Check The Steering And Suspension. Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Check Brake Lining For Oil/grease Or Uneven Wear. Inspect Brake Hoses For Restriction. Check For Proper Tire Pressure.
      • Does A Step Bore Style Master Cylinder Require A Specific Bleeding Process?
      • Dot 3 And 4 Are Glycol-based Fluids And Dot 5 Is A Silicone-based Fluid.
      • First, Check For Air In The System. Make Sure Master Cylinder Is Level When Bleeding. Air Will Compress In A Hydraulic System Causing A Low Pedal. Then, Check For Brake Hose Swelling Or Expanding Under Pressure. Next, Check Brake Drums/discs For Proper Sp
      • How Can I Test A Master Cylinder To See If It's Bypassing?
      • I Replaced The Master Cylinder And Now The Pedal Is High And Hard. Why?
      • Most Likely, The Fluid In The System Is Contaminated. The Most Common Form Of Contamination Occurs When Petroleum-based Fluid Has Been Accidentally Introduced Into The Brake System. If That Has Happened It Is Almost Certain That All Rubber Components In T
      • My Original Master Cylinder Leaked Out Of The Back Of The Piston Into The Booster Area. Why?
      • One Side Of My Front Brakes Won’t Release, Why?
      • Replace All Brake Fluid. Brake Fluid Is Hygroscopic Which Means It Absorbs Moisture. Too Much Water In Brake Fluid Will Cause Vapor Lock And Apply Pressure To The Wheels. Also Check For Proper Push Rod Adjustments And Stop Light/cruise Control Switch Adju
      • Simply Plug The Master Cylinder Ports And Press The Brake Pedal. If The Master Cylinder Is Bypassing, The Pedal Will Go Down. If The Pedal Stops Hard, The Master Cylinder Is Ok.
      • The Brake Pedal Is Low And Spongy. Is It A Bad Master Cylinder?
      • The First Step To Bench Bleeding A Step Bore Is To Slowly Depress The Master Cylinder Piston, Then Release Slowly And Wait 20 Seconds Before Depressing Again. Never Pump Piston/pedal With A Step Bore Style Master Cylinder. Follow The Same Process On The V
      • The Master Cylinder Is Working Correctly. Check For A Faulty Brake Booster Or Frozen Wheel Cylinder/caliper.
      • This Is Caused By A Problem With The Caliper Or A Brake Hose.
      • What Causes The Brakes To Lock Up After Only A Couple Of Miles?
      • What Causes The Car To Pull To One Side During Braking?
      • What Type Of Fluid Should I Use: Dot 3, Dot 4 Or Dot 5?
      • What’s The Difference Between Dot 3, 4 And 5?
      • Why Is The Piston Stuck Inside The Bore Of My Master Cylinder?
    • Features and Benefits:
      • Bores Meet Critical Micro-finish Specifications To Eliminate Pitting And Corrosion, A Cause Of Premature Failure
      • Castings Feature A Premium Protective Coating To Minimize Corrosion And Extend Unit Life
      • Mounting Hardware And Bleeding Kits Are Supplied With Every Unit To Make The Installation And Bleeding Process Faster And Easier (where Applicable)
      • Only O.e.-quality Seals And Cups Are Used To Ensure O.e. Performance And Reliability. All Rubber Components Meet S.a.e. Specifications
      • Plastic Reservoirs Are Vacuum-tested To Ensure They Are Leak Free
      • Seals Are Temperature-cycled From -30°f To +220°f To Ensure Reliable Performance During Your Daily Commute
    • Master Cylinder Color/Finish: Gray
    • Master Cylinder Material: Aluminum
    • Mounting Hole Quantity: 2
    • Package Contents: Master Cylinder
    • Port Count: 3
    • Primary Port Size: M12 X 1.0
    • Product Condition: New
    • Reservoir Material: Plastic
    • Reservoir Type: Single
    • Secondary Port Size: M12 X 1.0
  • Building on decades of experience using reverse engineering to remanufacture brake products, CARDONE engineers have meticulously designed our CARDONE® New Master Cylinders to match O.E. performance. Supplied with new O.E.-quality seals and cups, each unit is endurance-tested to ensure perfect fit, function and reliable performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
2003 - Infiniti FX35
Dorman
2005 Infiniti FX35 Brake Master Cylinder Dorman

P311-2EE3D99    M630746  New

R134913 , 46010CG010 , MC390794 , 130.42802 , 11-3116 , 46010CG001 , 46010CG000 , 130.42808 , 13-3116

Qty:
$146.64
  • ; wo/Adaptive Cruise Control
  • Product Attributes:
    • Bore Diameter: 1 In.
    • Forward Outlet Size: M12 X 1.0
    • Package Contents: Master Cylinder
    • Rearward Outlet Size: M12 X 1.0
    • Thread Pitch: 1.0
Brand: Dorman
Additional Fitment Information:
Vehicle
2005 - Infiniti FX35
Dorman
2010 Infiniti FX35 Brake Master Cylinder Dorman

P311-54627B3    M630813  New

13-4182 , 11-4182 , R135859 , 130.42813 , MC391382 , D6010JK51A

Qty:
$152.71
Dorman Brake Master Cylinder
  • ; Technology Package
  • Product Attributes:
    • Bore Diameter: 1 In.
    • Forward Outlet Size: M12 X 1.0
    • Package Contents: Master Cylinder
    • Rearward Outlet Size: M12 X 1.0; M12 X 1.5
    • Thread Pitch: 1.0
Brand: Dorman
Additional Fitment Information:
Vehicle
2010 - Infiniti FX35
Dorman
2004 Infiniti FX35 Brake Master Cylinder Dorman

P311-5D10777    M630745  New

46010CG010 , 130.42803 , R134912 , 130.42807 , 13-3115 , 11-3115 , MC390795 , 46010CG001 , 46010CG011

Qty:
$153.24
  • ; w/Adaptive Cruise Control
  • Product Attributes:
    • Bore Diameter: 1 In.
    • Forward Outlet Size: M12 X 1.0
    • Package Contents: Master Cylinder
    • Rearward Outlet Size: M12 X 1.0
    • Thread Pitch: 1.0
Brand: Dorman
Additional Fitment Information:
Vehicle
2004 - Infiniti FX35
Beck Arnley
2010 Infiniti FX35 Brake Master Cylinder Beck Arnley

P311-07A6B73    072-9784  New

Qty:
$165.48
Beck Arnley Brake Master Cylinder
  • BRAKE MASTER CYL
  • ; NEW; Except Technology Package
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle
2010 - Infiniti FX35
Raybestos
2005 Infiniti FX35 Brake Master Cylinder Raybestos - Element3; New

P311-5B2E370    MC390794  New

46010CG000 , 130.42802 , 46010CG001 , N0870 , 130.42803

Qty:
$179.27
Raybestos Brake Master Cylinder
  • ; Except Adaptive Cruise Control
  • Element3; New
  • Product Attributes:
    • Box Height: 3.938
    • Box Length: 7.750
    • Box Width: 6.438
    • Country of Origin: Cn
    • Primary Port Thread A: M12x1
    • Secondary Port Thread A: M12x1
    • Weight, Gross: 1.860
Brand: Raybestos
Additional Fitment Information:
Vehicle
2005 - Infiniti FX35
Raybestos
2005 Infiniti FX35 Brake Master Cylinder Raybestos - Element3; New

P311-2C85459    MC390795  New

130.42807 , N0860 , 46010CG011 , 13-3115 , 130.42808 , 46010CG010

Qty:
$179.27
Raybestos Brake Master Cylinder
  • ; Adaptive Cruise Control
  • Element3; New
  • Product Attributes:
    • Box Height: 3.938
    • Box Length: 7.750
    • Box Width: 6.438
    • Country of Origin: Cn
    • Primary Port Thread A: M12x1
    • Secondary Port Thread A: M12x1
    • Weight, Gross: 1.940
Brand: Raybestos
Additional Fitment Information:
Vehicle
2005 - Infiniti FX35
Raybestos
2006 Infiniti FX35 Brake Master Cylinder Raybestos - Element3; New

P311-5B2E370    MC390794  New

46010CG000 , 130.42802 , 46010CG001 , N0870 , 130.42803

Qty:
$179.27
Raybestos Brake Master Cylinder
  • ; Except Adaptive Cruise Control; Thru 10/05
  • Element3; New
  • Product Attributes:
    • Box Height: 3.938
    • Box Length: 7.750
    • Box Width: 6.438
    • Country of Origin: Cn
    • Primary Port Thread A: M12x1
    • Secondary Port Thread A: M12x1
    • Weight, Gross: 1.860
Brand: Raybestos
Additional Fitment Information:
Vehicle
2006 - Infiniti FX35

Showing 11 - 20 of 24 Products for Brake Master Cylinder.