Choose Vehicle Year

  1. Previous
  2. Home
  3. 2020
  4. Acura
  5. TLX
  6. Engine
  7. Engine Mount

Finish Selecting Your Vehicle

Choose your Submodel for your 2020 Acura TLX

  • Base

Shop By Brand

The Following brands are available based on your search.

  • Anchor
    Anchor
  • Autopart International
    Autopart International
  • Genuine
    Genuine
  • Hooker
    Hooker
  • Pioneer Cable
    Pioneer Cable

Showing Products For 2020 Acura TLX Engine Mount

Below are all the different brands and applications for 2020 Acura TLX Engine Mount

Showing 11 - 20 of 40 Products for Engine Mount.

Refine Your Search

Genuine
2020 Acura TLX Engine Mount - Right 4 Cyl 2.4L Genuine

P311-41192BD    W0133-4101255  New

Qty:
In Stock & Ready to Ship
$295.24
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Genuine
Position: Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2020 - Acura TLX Right L 4 Cyl 2.4L 144 2356
Pioneer Cable
2020 Acura TLX Engine Mount - Rear 4 Cyl 2.4L Pioneer Cable

P311-3C16D17    609812  New

Qty:
In Stock & Ready to Ship
$65.98
Pioneer Cable Engine Mount Rear
  • Pioneer Engine Mount
  • Pioneer Mounts offer a premium replacement solution. The only mount with the Sure-Fit System - a process of application testing on vehicle specific fixtures that ensures a hassle-free installation. The parts are manufactured from a high-grade metal with a corrosion resistant coating or cast from a pure aluminum creating a durable housing. Each housing is then bonded with a blended rubber compound that is specific to each application (including a seamless hydraulic fill and electronic control where specified) ensuring proper absorption of vibrations.
Brand: Pioneer Cable
Position: Rear
Additional Fitment Information:
Vehicle Submodel Transmission Engine Designation Trans. Speed Drive Type Valves Aspiration Fuel Type Engine VIN Cylinder Head Type Fuel Delivery Type Transmission Manuf. Code Engine Version Position Block Engine CID CC
2020 - Acura TLX Base Automatic Dual Clutch K24W7 8 FWD 16 Naturally Aspirated GAS - DOHC FI MDSA i-VTEC Rear L 4 Cyl 2.4L 144 2356
Hooker
Engine Mount Hooker

P311-503D351    71221009HKR  New

Qty:
In Stock & Ready to Ship
$241.22
Hooker Engine Mount
  • Engine Mount Brackets
  • Engine Mount Brackets; Blackheart; 1964-67 GM A-Body LS Engine Swap; Stock Location Adapter Plate;
  • Product Attributes:
    • Engine Type: Gm Ls
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Fabricated Steel Construction
    • Ability To Use Low Mount A/C Compressors In Most Instances
    • Zinc-Plated Finish
    • Brackets Are Bolt-In Compatible
  • Hooker has quickly become the leader in LS engine swaps and we are excited to announce new products for the 1964-67 GM A-Body. All Hooker engine swap components are designed to bolt right in for ease of installation, provide excellent ground clearance, and optimize driveline angles. The new 64-67 GM A-Body engine mounts are no exception. The engine swap mounts are constructed from zinc plated steel to provide a strong and rigid foundation for your swap. They are available in two different variations providing fitment for GM late model transmissions as well as the tried and true TH350 and TH400 transmissions. The mounts are compatible with the Holley 302-2 oil pan, Hooker Blackheart swap headers and exhaust, Saginaw or Delphi 600 power steering boxes, as well as low mount A/C compressors. They are the perfect choice for your LS swap A-Body build!LS Oil Pan 302-2 can be used with these mounts

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Engine Mount Hooker

P311-1069674    71223015HKR  New

Qty:
In Stock & Ready to Ship
$36.32
Hooker Engine Mount
  • Blackheart Motor Mount Insert Hardware Kit
  • Blackheart Motor Mount Insert Hardware Kit; Includes 2 Flange Head Bolts/2 Flange Nuts; For Use w/Motor Mount Insert PN[71221016HKR/71221017HKR];
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Factory Replacement M12x1.75x150mm Flange Head Bolt Kit
    • Stock Replacement Bolts Hard To Find Due To Uncommon Length
    • Kit Can Be Used for Either LS or LY Poly Mounts
    • Can Be Used For Aftermarket Poly Mounts or OEM Rubber
    • Class 10.9 For Strength
    • Zinc Plated for Corrosion Resistance
  • Factory replacement M12x1.75x150mm flange head bolt kit; Stock replacement bolts are hard to find due to their uncommon length. This kit can be used for either GM LS/LT & Mopar Gen III Hemi poly mounts

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Engine Mount Hooker

P311-34EB2F5    71221006HKR  New

Qty:
In Stock & Ready to Ship
$222.95
Hooker Engine Mount
  • Engine Mount Brackets
  • Engine Mount Brackets; For Use w/LS Swap In To 1968-1972 A-Body; Forward Position;
  • Product Attributes:
    • Engine Type: Ls Swap
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Zinc-Plated For Durability Corrosion Resistance
    • Broad Accessory Drive Compatibility
    • Provides A Durable Cost Effective Mounting Solution
  • These Hooker BlackHeart engine swap mounting brackets facilitate the installation of an GM LS motor into a 1968-72 A-Body as part of your LS swap project. This mounting bracket kit is part of the most comprehensively engineered system of mounting components, headers and exhaust systems available for this application. The entire Hooker BlackHeart swap system is designed to decrease your total swap installation effort and cost, while increasing the engineered quality of your vehicle and compatibility of these components with other popular aftermarket components. LS Oil Pan 302-2 can be used with these mounts** Please read the provided instructions thoroughly before attempting installation.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Engine Mount Hooker

P311-29448D0    BHS531  New

Qty:
In Stock & Ready to Ship
$209.53
Hooker Engine Mount
  • Engine Mount Brackets
  • Engine Mount Brackets; Fits w/1966-1972 Mopar B-Body Gen III Hemi Swap; Black;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Heavy Duty 3/16 in. Steel Construction For Strength/Durability
    • Short Runner Valve Intake Solenoid Clears Firewall
    • Features All 4 OEM Engine Mount Bolt Hole
    • 5th Bolt Hole That Can Be Used On Later Engine Blocks
    • Provide The Most Transmission Alternatives
    • Optimize Driveline Angles
    • Welded Steel Construction
    • With Black Coating For Great Looks And Durability
    • Uses OEM Rubber Or Any OEM Style Polyurethane Isolator
    • Includes Engine Mounting Brackets/Attaching Hardware/Instructions
  • Hooker Blackheart engine swap mounts allow easy installation of the Gen III Hemi engine in your 1966-72 Mopar B-Body. These engine-mounting brackets are part of an engineered solution that works together with the transmission crossmember and headers to optimize the engine placement & component clearances along with ideal drivetrain / U-joint operation angles. The engine placement eliminates modifications to the firewall and the engine mount brackets fit the K-member on cars that originally came from the factory with a V8. Clearance was provided for the use of Short Runner Valve (SRV) intake solenoid, low mount alternator, and low mount A/C Compressors when used with a VVT (Variable Valve Timing) accessory drive.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Engine Mount Hooker

P311-4FB1407    71221004HKR  New

Qty:
In Stock & Ready to Ship
$33.75
Hooker Engine Mount
  • Motor Mount Bracket
  • Motor Mount Bracket; For Use w/Small Block Chevy Engine Swap; Clamshell; Durable E Coat; Black;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Black Finish
    • Heavy Duty Construction Over 50% Thicker
    • Dowels Allow For Easy Alignment
    • No Need To Drill Rivet From Existing Shell
    • Requires 2 Per Vehicle
  • Hooker BlackHeart Clamshell Engine Mounts and Polyurethane Engine Mount Inserts are now available for a variety of GM applications that utilize the common 2292 aftermarket mounts. The clamshell housings are the perfect solution to flimsy, lightweight aftermarket options. They feature a two piece design with heavy-duty, 11-gauge steel construction and a durable powder coated finish. Hooker BlackHeart Polyurethane Engine Mount Inserts have been designed with durability, performance, and ease of installation in mind. The inserts are available in both black and red, and feature factory style indexing tabs to help with alignment during installation.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Engine Mount Hooker

P311-1D1F8BC    BHS503  New

Qty:
In Stock & Ready to Ship
$227.57
Hooker Engine Mount
  • Engine Mount Brackets
  • Engine Mount Brackets; Fits w/1996-2004 Ford Mustang LS Engine Swap; For Use w/AJE K Member PN[MU40UM]; Black Powder Coated Finish; Includes All Hardware;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Durable Powder Coated Finish
    • Works With Hooker Blackheart 8501Hkr Exhaust Manifolds And 8510Hkr Turbo Manifolds
    • 100 Percent Quality Hand-Welded Construction For Strength/Longevity/And Good Looks
    • Manufacturers Limited Lifetime Warranty
    • All Hardware Included
    • Allows The Use Of Any Holley Or Weiand Brand LS Oil Pan
  • These new Hooker BlackHeart LS Swap Engine Mounting Brackets are designed to be used with Team Z #TZM-KM-SWAP4 and AJE #MU40-UM K-members and offer the strength and precision that accompanies the Blackheart name. The addition of a Hooker BlackHeart Transmission Crossmember (71222012HKR or 71222013HKR) makes for a trouble-free installation with optimized driveline angles. No additional engine mounts are required. See the instructions for additional compatibility and to identify which crossmember and adapters are required for your transmission choice (some will reuse the factory crossmember and mount).

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Engine Mount Hooker

P311-1ADC7D8    71221008HKR  New

Qty:
In Stock & Ready to Ship
$222.95
Hooker Engine Mount
  • Engine Mount Brackets
  • Engine Mount Brackets; Blackheart; 1964-67 GM A-Body LS Engine Swap; 1 in. Forward Adapter Plate;
  • Product Attributes:
    • Engine Type: Gm Ls
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Fabricated Steel Construction
    • Ability To Use Low Mount A/C Compressors In Most Instances
    • Zinc-Plated Finish
    • Brackets Are Bolt-In Compatible
  • Hooker has quickly become the leader in LS engine swaps and we are excited to announce new products for the 1964-67 GM A-Body. All Hooker engine swap components are designed to bolt right in for ease of installation, provide excellent ground clearance, and optimize driveline angles. The new 64-67 GM A-Body engine mounts are no exception. The engine swap mounts are constructed from zinc plated steel to provide a strong and rigid foundation for your swap. They are available in two different variations providing fitment for GM late model transmissions as well as the tried and true TH350 and TH400 transmissions. The mounts are compatible with the Holley 302-2 oil pan, Hooker Blackheart swap headers and exhaust, Saginaw or Delphi 600 power steering boxes, as well as low mount A/C compressors. They are the perfect choice for your LS swap A-Body build!LS Oil Pan 302-2 can be used with these mounts

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle
Hooker
Engine Mount Hooker

P311-1ED683B    12611HKR  New

Qty:
In Stock & Ready to Ship
$171.05
Hooker Engine Mount
  • Engine Mount Brackets
  • Engine Mount Brackets; GM LS Engine Swap; Stock Location Adapter Plate;
  • Product Attributes:
    • Engine Type: Gm Ls
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Zinc-Plated For Durability Corrosion Resistance
    • With Counter Sink Machine Screws And Instructions
    • Precision Machined For Perfect Alignment
    • Lightweight/Rigid/Clean Appearance
  • Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small-block Chevy engine mounts to place the engine and transmission in the stock location or move it forward 1/2, 1-1/4, or 3-inches. Hooker also offers a mount kit designed for applications that use the clamshell type mount such as a G-body. Holleys new LS engine swap mount plates made the EcoNovas E-Rod LS3 swap simple and painless as well as improving our weight distribution with ideal engine set-back, and the LS Retro-Fit oil pan fit the subframe perfectly while still offering excellent oil control under high cornering loads.-Christopher Campbell, Popular Hot Rodding Magazine

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hooker
Additional Fitment Information:
Vehicle

Showing 11 - 20 of 40 Products for Engine Mount.