Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • Enginequest
    Enginequest
  • Ford Performance
    Ford Performance

Showing Products For 2019 Jeep Wrangler Engine Cylinder Head

Below are all the different brands and applications for 2019 Jeep Wrangler Engine Cylinder Head

Showing 1 - 10 of 36 Products for Engine Cylinder Head.

Refine Your Search

Edelbrock
Engine Cylinder Head Edelbrock

P311-21D48A0    60947  New

Qty:
In Stock & Ready to Ship
$820.21
Edelbrock Engine Cylinder Head
  • NHRA Small-Block Chevy 64cc Cylinder Head Bare
  • The Edelbrock #60947 Performer RPM Bare NHRA Stock/Super Stock cylinder heads are designed for 1955-86 Small-Block Chevy applications. These cylinder heads deliver great throttle response and power from 1500 to 6500 rpm.
  • Product Attributes:
    • CNC Ported: No
    • Combustion Chamber Volume: 64
    • Construction Type: Bare
    • Cylinder Head Type: Standard
    • Deck Thickness: 0.5625
    • EGR Port: No
    • Emission: Non-emissions
    • Engine Make/Size: Chevy Small Block (262-400)
    • Exhaust Port Location: Standard
    • Exhaust Runner Volume: 65
    • Family: Performer Rpm
    • Grade Type: Performance
    • Guide Material: Manganese Bronze
    • Guide Plates Included: No
    • Head Casting Number: N/a
    • Intake Runner Volume: 185
    • Preparation: Requires Professional Preparation (bare)
    • Quantity: Sold Individually
    • Retainer Included: No
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Rotor Center Bore Inside Diameter: Angled
    • Seat Angle: Exhaust 45 Deg/intake 45
    • Seat Material: Ductile Iron
    • Usage: Competition
    • Valve Angle: 23
    • Valve Springs Included: No
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Out-of-the-Box Bolt-On Performance
    • Hand-Blended Intake and Exhaust Bowls
    • CNC-Matched Intake/Exhaust Ports in Std Location
    • Thicker Deck Surfaces Than Other Brands
  • The Edelbrock #60947 Performer RPM Bare NHRA Stock/Super Stock cylinder head is designed for 1955-86 Small-Block Chevy applications. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. Cast and heat treated at the Edelbrock Foundry and machined at Edelbrock's manufacturing facility in the USA, the Edelbrock head is the best in quality and performance. All Edelbrock cylinder head is designed from scratch using the latest in computer technology by our own highly skilled engineer's. Using highly efficient ports and state-of-the-art combustion chamber shapes, Edelbrock cylinder head offers improved performance throughout the rpm range for great throttle response and top-end horsepower. Top-quality features include threaded inserts in rocker stud and exhaust bolt holes for superior strength and durability, and manganese-bronze valve guides with ductile iron valve seats. These are features that some other companies don't include!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Cylinder Head Edelbrock

P311-4BC4660    61729  New

Qty:
In Stock & Ready to Ship
$2,334.59
Edelbrock Engine Cylinder Head
  • Victor Small-Block Chrysler Cylinder Head W/ Solid Roller Camshaft
  • Edelbrock part #61729 Victor Series cylinder heads are for use on 1967-1991, 318-360 c.i.d. Chrysler LA engines. They feature fully CNC ported 58cc combustion chambers and have an intake port volume of 225cc.
  • Product Attributes:
    • Camshaft Type: Solid Roller
    • CNC Ported: No
    • Combustion Chamber Volume: 60
    • Construction Type: Complete
    • Cylinder Head Type: 16 Degree
    • Deck Thickness: 0.625
    • EGR Port: No
    • Emission: Non-emissions
    • Engine Make/Size: Mopar 318-360
    • Exhaust Port Location: +.500
    • Exhaust Runner Volume: 62
    • Exhaust Valve Diameter: 1.60
    • Family: Victor
    • Grade Type: Performance
    • Guide Material: Manganese Bronze
    • Guide Plate Material: Hardened Steel
    • Guide Plates Included: No
    • Head Casting Number: N/a
    • Horsepower: 500-650
    • Intake Runner Volume: 225
    • Intake Valve Diameter: 2.15
    • Preparation: Bolt On (not Required)
    • Quantity: Sold Individually
    • Retainer Included: Yes
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Seat Angle: Exhaust 45 Deg/intake 45
    • Seat Material: Ductile Iron
    • Usage: Racing
    • Valve Angle: 16
    • Valve Included: Yes
    • Valve Spring Diameter: 1.55
    • Valve Spring Maximum Lift: 0.670
    • Valve Springs Included: Yes
    • Valve Stem Diameter: 0.3438
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Fully Race-Oriented Designed
    • Cast With Extra Material In The Ports And Chambers
    • Raised Exhaust Ports To Improve Flow Efficiency
    • Supplied w/Reamed/Semi Finished Valve Stems Guides
    • HIP Processed For Improved Quality And Strength
    • Works With Existing Edelbrock NASCAR SB2 Manifold
  • bare, bare with valves, complete (for hydraulic/flat tappet cams and solid roller cams) and Pro Port Raw. End-seal spacers are provided.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Cylinder Head Edelbrock

P311-082197A    77169  New

Qty:
In Stock & Ready to Ship
$825.96
Edelbrock Engine Cylinder Head
  • Victor Jr Small-Block Ford Cylinder Head
  • Edelbrock part #77169 Victor Jr. 20 degree is a bare cylinder head designed for S/B Ford 289-351W engines. This head has the potential of 500+ Horsepower out-of-the-box using a stock valve train geometry.
  • Product Attributes:
    • CNC Ported: No
    • Combustion Chamber Volume: 60
    • Construction Type: Bare
    • Cylinder Head Type: Standard
    • Deck Thickness: 0.625
    • EGR Port: No
    • Emission: Non-emissions
    • Engine Make/Size: Ford 260-302
    • Exhaust Port Location: +.125
    • Exhaust Runner Volume: 75
    • Family: Victor Jr.
    • Grade Type: Performance
    • Guide Material: Manganese Bronze
    • Guide Plates Included: Yes
    • Head Casting Number: N/a
    • Intake Runner Volume: 210
    • Preparation: Requires Professional Preparation (bare)
    • Quantity: Sold Individually
    • Retainer Included: No
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Seat Angle: Exhaust 45 Deg/intake 45
    • Seat Material: Ductile Iron
    • Usage: Racing
    • Valve Included: No
    • Valve Springs Included: No
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Out-of-the-Box Bolt-On Performance
    • Affordable
    • Top Quality
    • 500+ HP Potential
    • High-Flow 210cc Intake Ports
    • CNC Gasket-Matched Part Entries/Exits
    • Spark Plugs/Valves In The Stock Location
  • The Edelbrock 77169 Victor Jr. Small Block Ford cylinder head offers high horsepower potential on competition level engines and are compatible with OE valve train and pistons for bolt-on convenience. VICTOR JR. 20deg - 210cc FEATURES: 500+ horsepower potential out-of-the-box using stock valve train geometry High-flowing 210cc intake ports and .130" raised 75cc exhaust ports Available with 60cc or 70cc combustion chambers 70cc combustion chambers are ideal for turbocharged and supercharged applications CNC gasket-matched port entries/exits with blended valve bowls Spark plug holes and valves are in the stock location Valve cover rail raised .150" A relief in the head allows most roller lifters to be changed without removing the head

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Cylinder Head Edelbrock

P311-434280C    77179  New

Qty:
In Stock & Ready to Ship
$956.74
Edelbrock Engine Cylinder Head
  • Victor Jr Small-Block Ford Cylinder Head W/ Valves
  • Edelbrock part #77179 Victor Jr. 20 Degree is a complete cylinder head designed for S/B Ford 289-351W engines. This head has the potential of 500+ Horsepower out-of-the-box using a stock valve train geometry.
  • Product Attributes:
    • CNC Ported: No
    • Combustion Chamber Volume: 60
    • Construction Type: Complete
    • Cylinder Head Type: Standard
    • Deck Thickness: 0.625
    • EGR Port: No
    • Emission: Non-emissions
    • Engine Make/Size: Ford 260-302
    • Exhaust Port Location: +.125
    • Exhaust Runner Volume: 75
    • Exhaust Valve Diameter: 1.60
    • Family: Victor Jr.
    • Grade Type: Performance
    • Guide Material: Manganese Bronze
    • Guide Plate Material: Hardened Steel
    • Guide Plates Included: Yes
    • Head Casting Number: N/a
    • Horsepower: 350-600
    • Intake Runner Volume: 210
    • Intake Valve Diameter: 2.05
    • Preparation: Requires Professional Preparation (bare)
    • Push Rod Diameter: (suggested) 0.3125
    • Quantity: Sold Individually
    • Retainer Included: No
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Seat Angle: Exhaust 45 Deg/intake 45
    • Seat Material: Ductile Iron
    • Usage: Racing
    • Valve Angle: 20
    • Valve Included: Yes
    • Valve Springs Included: No
    • Valve Stem Diameter: 0.3438
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Out-of-the-Box Bolt-On Performance
    • Affordable
    • Top Quality
    • 500+ HP Potential
    • High-Flow 210cc Intake Ports
    • CNC Gasket-Matched Part Entries/Exits
    • Spark Plugs/Valves In The Stock Location
  • The Edelbrock 77179 Victor Jr. Small Block Ford cylinder head offers high horsepower potential on competition level engines and are compatible with OE valve train and pistons for bolt-on convenience. VICTOR JR. 20deg - 210cc FEATURES: 500+ horsepower potential out-of-the-box using stock valve train geometry High-flowing 210cc intake ports and .130" raised 75cc exhaust ports Available with 60cc or 70cc combustion chambers 70cc combustion chambers are ideal for turbocharged and supercharged applications CNC gasket-matched port entries/exits with blended valve bowls Spark plug holes and valves are in the stock location Valve cover rail raised .150" A relief in the head allows most roller lifters to be changed without removing the head

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Cylinder Head Edelbrock

P311-2C0166B    77199  New

Qty:
In Stock & Ready to Ship
$1,235.69
Edelbrock Engine Cylinder Head
  • Victor Jr Small-Block Ford Cylinder Head Hydraulic Roller Camshaft
  • Edelbrock part #77199 Victor Jr. 20 Degree is a complete cylinder head designed for S/B Ford 289-351W engines. This head has the potential of 500+ Horsepower out-of-the-box using a stock valve train geometry.
  • Product Attributes:
    • Camshaft Type: Mechanical Roller
    • CNC Ported: No
    • Combustion Chamber Volume: 60
    • Construction Type: Complete
    • Cylinder Head Type: Standard
    • Deck Thickness: 0.625
    • EGR Port: No
    • Emission: Non-emissions
    • Engine Make/Size: Ford 302-351w
    • Exhaust Port Location: +.125
    • Exhaust Runner Volume: 75
    • Exhaust Valve Diameter: 1.60
    • Family: Victor Jr.
    • Grade Type: Performance
    • Guide Material: Manganese Bronze
    • Guide Plate Material: Hardened Steel
    • Guide Plates Included: Yes
    • Head Casting Number: N/a
    • Horsepower: 400-600
    • Intake Runner Volume: 210
    • Intake Valve Diameter: 2.05
    • Preparation: Bolt On (not Required)
    • Push Rod Diameter: (suggested) 0.3125
    • Quantity: Sold Individually
    • Retainer Included: Yes
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Rocker Arm Stud Diameter: 0.4375
    • Seat Angle: Exhaust 45 Deg/intake 45
    • Seat Material: Ductile Iron
    • Usage: Racing
    • Valve Angle: 20
    • Valve Included: Yes
    • Valve Spring Diameter: 1.55
    • Valve Spring Maximum Lift: 0.670
    • Valve Springs Included: Yes
    • Valve Stem Diameter: 0.3438
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Out-of-the-Box Bolt-On Performance
    • Affordable
    • Top Quality
    • 500+ HP Potential
    • High-Flow 210cc Intake Ports
    • CNC Gasket-Matched Part Entries/Exits
    • Spark Plugs/Valves In The Stock Location
  • The Edelbrock 77199 Victor Jr. Small Block Ford cylinder head offers high horsepower potential on competition level engines and are compatible with OE valve train and pistons for bolt-on convenience. VICTOR JR. 20deg - 210cc FEATURES: 500+ horsepower potential out-of-the-box using stock valve train geometry High-flowing 210cc intake ports and .130" raised 75cc exhaust ports Available with 60cc or 70cc combustion chambers 70cc combustion chambers are ideal for turbocharged and supercharged applications CNC gasket-matched port entries/exits with blended valve bowls Spark plug holes and valves are in the stock location Valve cover rail raised .150" A relief in the head allows most roller lifters to be changed without removing the head

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Cylinder Head Edelbrock

P311-356BC1C    60595  New

Qty:
In Stock & Ready to Ship
$1,505.34
Edelbrock Engine Cylinder Head
  • Performer Pontiac Cylinder Head 72cc Hydraulic Roller Camshaft
  • The Edelbrock #60595 Performer RPM cylinder heads are designed for outstanding performance gains in 1962-79 389-455 c.i.d. Pontiac engines. They are patterned after the 1969-70 Ram Air IV Pontiac cylinder head.
  • Product Attributes:
    • Camshaft Type: Hydraulic Roller
    • CNC Ported: No
    • Combustion Chamber Volume: 72
    • Construction Type: Complete
    • Cylinder Head Type: Standard
    • Deck Thickness: 0.625
    • EGR Port: No
    • Emission: N/a
    • Engine Make/Size: Pontiac 326-455
    • Exhaust Port Location: Standard
    • Exhaust Runner Volume: 175
    • Exhaust Valve Diameter: 1.66
    • Family: Performer Rpm
    • Grade Type: Performance
    • Guide Material: Manganese Bronze
    • Guide Plate Material: Hardened Steel
    • Guide Plates Included: Yes
    • Head Casting Number: N/a
    • Horsepower: 450-550
    • Intake Runner Volume: 215
    • Intake Valve Diameter: 2.11
    • Preparation: Bolt On (not Required)
    • Push Rod Diameter: (suggested) 0.3125
    • Quantity: Sold Individually
    • Retainer Included: Yes
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Rocker Arm Stud Diameter: 0.4375
    • Seat Angle: Exhaust 45 Deg/intake 45
    • Seat Material: Ductile Iron
    • Usage: Street/hi-performance
    • Valve Angle: 14
    • Valve Included: Yes
    • Valve Spring Diameter: 1.46
    • Valve Spring Maximum Lift: 0.575
    • Valve Springs Included: Yes
    • Valve Stem Diameter: 0.3438
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Out-of-the-Box Bolt-On Performance
    • Hand-Blended Intake and Exhaust Bowls
    • CNC-Matched Intake/Exhaust Ports in Std Location
    • Thicker Deck Surfaces Than Other Brands
    • For Use On Pre-Pollution Controlled Vehicles (PPCV)
  • The Edelbrock #60595 Performer RPM cylinder head is designed for outstanding performance gains in 1962-79 389-455 c.i.d. Pontiac engines. They are patterned after the 1969-70 Ram Air IV Pontiac cylinder head. The Edelbrock #60595 Performer RPM head with the 72cc combustion chamber are for higher compression engines. Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Cylinder Head Edelbrock

P311-07D7176    60985  New

Qty:
In Stock & Ready to Ship
$1,044.95
Edelbrock Engine Cylinder Head
  • E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Roller Cam
  • The Edelbrock #60985 E-Tec Cylinder Heads are replacements for 302, 327, 350 & 400 SB Chevy engines with Vortec-style manifolds. They feature an LT1-style raised runner intake port design for increased air-flow and ultimate performance.
  • Product Attributes:
    • Camshaft Type: Hydraulic Roller
    • CNC Ported: No
    • Combustion Chamber Volume: 64
    • Construction Type: Complete
    • Cylinder Head Type: Standard
    • Deck Thickness: 0.625
    • EGR Port: No
    • Emission: Non-emissions
    • Engine Make/Size: Chevy Small Block (262-400)
    • Exhaust Port Location: Standard
    • Exhaust Runner Volume: 80
    • Exhaust Valve Diameter: 1.60
    • Family: E-tec
    • Grade Type: Performance
    • Guide Material: Manganese Bronze
    • Guide Plate Material: Hardened Steel
    • Guide Plates Included: Yes
    • Head Casting Number: N/a
    • Horsepower: 350-500
    • Intake Runner Volume: 200
    • Intake Valve Diameter: 2.02
    • Preparation: Bolt On (not Required)
    • Push Rod Diameter: (suggested) 0.625
    • Quantity: Sold Individually
    • Retainer Included: Yes
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Rocker Arm Stud Diameter: 0.375
    • Rotor Center Bore Inside Diameter: Straight
    • Seat Angle: Exhaust 45 Deg/intake 45
    • Seat Material: Ductile Iron
    • Usage: Street/performance
    • Valve Angle: 23
    • Valve Included: Yes
    • Valve Spring Diameter: 1.46
    • Valve Spring Maximum Lift: 0.575
    • Valve Springs Included: Yes
    • Valve Stem Diameter: 0.3438
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Out-of-the-Box Bolt-On Performance
    • Hand-Blended Intake and Exhaust Bowls
    • CNC-Matched Intake/Exhaust Ports in Std Location
    • Thicker Deck Surfaces Than Other Brands
  • The Edelbrock #60985 E-Tec cylinder head is replacements for 302, 327, 350 & 400 c.i.d. S/B Chevy engines with "Vortec-style" manifolds. They feature an LT1-style raised runner intake port design for increased air-flow and ultimate performance. A unique combustion chamber design positions the spark plug closer to the center of the cylinder, promoting a more efficient combustion resulting in more power. This head includes an adjustable rocker stud and guide plate set-up for use with adjustable rockers or washers to properly position the stud height to accommodate factory style self-aligning rocker arms. They have 20% more exhaust flow than a cast iron Vortec head, great performance up to 6000 rpm and can produce 9.5:1 compression with stock pistons in 350 cubic-inch engines. RPM E-Tec cylinder head is dual-drilled and will accept 1987-95 center bolt and/or 1986 & prior perimeter flange mount valve covers and most stock exhaust manifolds.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Cylinder Head Edelbrock

P311-2275CCB    61099  New

Qty:
In Stock & Ready to Ship
$1,757.96
Edelbrock Engine Cylinder Head
  • RPM Cylinder Head #61099 2003-08 Gen III HEMI V8 Hydraulic Roller 83cc Complete
  • The Edelbrock #61099 Performer RPM cylinder heads are a bolt-on performance upgrade for 2003-2008 Gen III HEMI Early 5.7L engines. Designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers and accessories.
  • Product Attributes:
    • Camshaft Type: Hydraulic Roller
    • CNC Ported: No
    • Combustion Chamber Volume: 83
    • Construction Type: Complete
    • Cylinder Head Type: Standard
    • Deck Thickness: 0.625
    • EGR Port: No
    • Emission: Non-emissions
    • Engine Make/Size: Chrysler 5.7/6.1/6.2/6.4 Gen Iii Vi
    • Exhaust Port Location: Eagle
    • Exhaust Runner Volume: 75
    • Exhaust Valve Diameter: 1.650
    • Family: Performer Rpm
    • Grade Type: Performance
    • Guide Material: Manganese Bronze
    • Guide Plates Included: No
    • Head Casting Number: N/a
    • Horsepower: 450-700
    • Intake Runner Volume: 202
    • Intake Valve Diameter: 2.165
    • Preparation: Bolt On (not Required)
    • Push Rod Diameter: (suggested) Stock
    • Quantity: Sold Individually
    • Retainer Included: Yes
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Seat Angle: Exhaust 45 Deg/intake 45
    • Seat Material: Ductile Iron
    • Usage: Street/strip
    • Valve Angle: Exhaust 16.8 Deg/intake 18.8
    • Valve Included: Yes
    • Valve Spring Diameter: 1.066 In/ 1.300
    • Valve Spring Maximum Lift: 0.680
    • Valve Springs Included: Yes
    • Valve Stem Diameter: 0.314961
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Bolt On Performance
    • Eagle Intake And Exh. Port Location
    • CNC Machined Combustion Chambers
    • CNC Profiled Bowls And Port Entries/Exits
    • More Material In The Deck For Increased. Cyl. Pressures
    • Rocker Bosses Reinforced For Improved Stability/Strength
    • Machined To Use On Either Drivers/Passenger Side Of Block
    • Increased Seat Diams. For Improved Heat Transfer
  • The Edelbrock #61099 Performer RPM cylinder head is a bolt-on performance upgrade for 2003-2008 Gen III HEMI Early 5.7L engines. It's designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs and accessories, as well as Hellcat components. this cylinder head have been machined to be used on either the driver or passenger side of the block. They are cast from A356 aluminum and heat treated to T6 specifications, machined and assembled at Edelbrock's facility in Torrance, California for guaranteed quality. The Edelbrock #61099 Performer RPM cylinder head features fully CNC machined combustion chambers along with CNC profiled bowls and port entries/exits for improved air flow. They also feature more material in the deck and reinforced combustion chambers for increased cylinder pressures. The rocker bosses have been reinforced for improved stability and strength. Extra material has been added around the intake and exhaust ports to allow for porting in racing applications. Both the intake and exhaust port flanges have remained in the factory location for use with OEM components. The intake and exhaust valves have been tipped away from bore wall to unshroud the larger valves, while maintaining factory geometry. The seat diameters have also been increased for improved heat transfer and durability over stock. Match with an Edelbrock Victor EFI #7179 intake manifold for the ultimate in Edelbrock Gen III HEMI performance.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Cylinder Head Edelbrock

P311-501DD21    61175  New

Qty:
In Stock & Ready to Ship
$1,765.89
Edelbrock Engine Cylinder Head
  • Victor Jr Gen II HEMI Chrysler Cylinder Head Hydraulic Roller Camshaft
  • Our new Edelbrock #61175 Victor Jr. Cylinder Heads are designed for high output 650+ hp Chrysler 426-572 HEMI engines. Fully CNC'd combustion chambers and CNC blended seats for optimal air flow performance.
  • Product Attributes:
    • Camshaft Type: Hydraulic Roller
    • CNC Ported: Yes
    • Combustion Chamber Volume: 170
    • Construction Type: Complete
    • Cylinder Head Type: Rectangular Port
    • Deck Thickness: 0.625
    • EGR Port: No
    • Emission: Non-emissions
    • Engine Make/Size: Mopar 426-572 Hemi
    • Exhaust Port Location: Standard
    • Exhaust Runner Volume: 105
    • Exhaust Valve Diameter: 1.94
    • Family: Victor Jr.
    • Grade Type: Performance
    • Guide Material: Manganese Bronze
    • Guide Plates Included: No
    • Head Casting Number: N/a
    • Horsepower: 550-800
    • Intake Runner Volume: 245
    • Intake Valve Diameter: 2.320
    • Preparation: Factory Cnc Ported
    • Push Rod Diameter: (suggested) 0.3125 In Or 0.375
    • Quantity: Sold Individually
    • Retainer Included: Yes
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Seat Angle: Exhaust 45 Deg/intake 45
    • Seat Material: Ductile Iron
    • Usage: Racing
    • Valve Angle: Exhaust (tipped) 1.5-21.5 Deg/intake Stock
    • Valve Included: Yes
    • Valve Spring Diameter: 1.54
    • Valve Spring Maximum Lift: 0.700
    • Valve Springs Included: Yes
    • Valve Stem Diameter: 0.3125
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • CNC Chambers
    • Affordable
    • Top Quality
    • Revised Exhaust Valve Angle
  • Our new Edelbrock #61175 Victor Jr. cylinder head is designed for high output 650+ hp Chrysler 426-572 HEMI engines. They feature fully CNC'd combustion chambers and CNC blended seats for optimal air flow performance. This cylinder head also feature a revised exhaust valve angle to accommodate larger intake valves. They also feature brass tubes installed in exhaust pushrod holes to allow maximum clearance with minimal port intrusion.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Engine Cylinder Head Edelbrock

P311-4A97C9B    61649  New

Qty:
In Stock & Ready to Ship
$1,505.34
Edelbrock Engine Cylinder Head
  • RPM Big-Block Ford 460 CJ Cylinder Head 75cc Hydraulic Flat Tappet Cam
  • Edelbrock part #61649 Performer RPM CJ cylinder heads are designed for use with 1968-87 429/460 Fords and SVO 514 engine applications.
  • Product Attributes:
    • Camshaft Type: Flat Tappet
    • CNC Ported: No
    • Combustion Chamber Volume: 75
    • Construction Type: Complete
    • Cylinder Head Type: Standard
    • Deck Thickness: 0.625
    • EGR Port: No
    • Emission: Non-emissions
    • Engine Make/Size: Ford 429-460
    • Exhaust Port Location: Standard
    • Exhaust Runner Volume: 100
    • Exhaust Valve Diameter: 1.76
    • Family: Performer Rpm
    • Grade Type: Performance
    • Guide Material: Manganese Bronze
    • Guide Plate Material: Hardened Steel
    • Guide Plates Included: Yes
    • Head Casting Number: N/a
    • Horsepower: 550-750
    • Intake Runner Volume: 310
    • Intake Valve Diameter: 2.19
    • Preparation: Bolt On (not Required)
    • Push Rod Diameter: (suggested) 0.375
    • Quantity: Sold Individually
    • Retainer Included: Yes
    • RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
    • Rocker Arm Stud Diameter: 0.4375
    • Seat Angle: Exhaust 45 Deg/intake 45
    • Seat Material: Ductile Iron
    • Usage: Street/hi-performance
    • Valve Included: Yes
    • Valve Spring Diameter: 1.55
    • Valve Spring Maximum Lift: 0.700
    • Valve Springs Included: Yes
    • Valve Stem Diameter: 0.3438
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Machine Profile Cobra Jet Style Intake Port Entry
    • Out-of-the-Box Bolt-On Performance
    • CNC-Matched Intake/Exhaust Ports in Std Location
    • Thicker Deck Surfaces Than Other Brands
    • Heli-Coils in Rocker Studs and Exhaust Bolt Holes
  • The Edelbrock #61649 Performer RPM CJ cylinder head is designed for use with 1968-87 429/460 Fords and SVO 514 engine applications. The Edelbrock #61649 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. This cylinder head delivers great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 36 Products for Engine Cylinder Head.