Finish Selecting Your Vehicle

Choose your Submodel for your 2017 Ford Escape

  • S
  • SE
  • Titanium

Shop By Brand

The Following brands are available based on your search.

  • Autopart International
    Autopart International
  • Cardone
    Cardone
  • Genuine
    Genuine
  • Motorcraft
    Motorcraft

Showing Products For 2017 Ford Escape CV Axle Assembly

Below are all the different brands and applications for 2017 Ford Escape CV Axle Assembly

Showing 1 - 10 of 16 Products for CV Axle Assembly.

Refine Your Search

Motorcraft
2017 Ford Escape CV Axle Assembly - Front Left 4 Cyl 1.5L Motorcraft

P311-4CFA382    W0133-1999611  New

Qty:
In Stock & Ready to Ship
$236.55
Motorcraft CV Axle Assembly  Front Left
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
Brand: Motorcraft
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2017 - Ford Escape Front Left L 4 Cyl 1.5L 91 1499
Genuine
2017 Ford Escape CV Axle Assembly - Rear Genuine

P311-39FF0CB    W0133-2802274  New

Qty:
In Stock & Ready to Ship
$335.60
Genuine CV Axle Assembly  Rear
  • 100% New
  • Production: 08/31/2016-
Brand: Genuine
Position: Rear
Additional Fitment Information:
Vehicle Submodel Position Prod. Date Range
2017 - Ford Escape Titanium Rear Fr:08-31-16
Genuine
2017 Ford Escape CV Axle Assembly - Rear Genuine

P311-39FF0CB    W0133-2802274  New

Qty:
In Stock & Ready to Ship
$335.60
Genuine CV Axle Assembly  Rear
  • 100% New
  • Production: -08/31/2016
Brand: Genuine
Position: Rear
Additional Fitment Information:
Vehicle Submodel Position Prod. Date Range
2017 - Ford Escape Titanium Rear To:08-31-16
Autopart International
2017 Ford Escape CV Axle Assembly - Front Right 4 Cyl 2.0L Autopart International - 100% NEW

P311-27E0DB5    W0133-4225206  New

Qty:
In Stock & Ready to Ship
$141.80
Autopart International CV Axle Assembly  Front Right
  • Premium OE Design
  • 100% NEW
Brand: Autopart International
Position: Front Right
Additional Fitment Information:
Vehicle Drive Type Position Block Engine CID CC
2017 - Ford Escape FWD Front Right L 4 Cyl 2.0L 122 1999
Autopart International
2017 Ford Escape CV Axle Assembly - Front Right 4 Cyl 2.0L Autopart International - 100% NEW

P311-42FE655    W0133-3755038  New

Qty:
In Stock & Ready to Ship
$153.71
Autopart International CV Axle Assembly  Front Right
  • Premium OE Design
  • 100% NEW
Brand: Autopart International
Position: Front Right
Additional Fitment Information:
Vehicle Drive Type Position Block Engine CID CC
2017 - Ford Escape AWD Front Right L 4 Cyl 2.0L 122 1999
Autopart International
2017 Ford Escape CV Axle Assembly - Front Left 4 Cyl 2.0L Autopart International - 100% NEW

P311-57DD426    W0133-3755002  New

Qty:
In Stock & Ready to Ship
$101.46
Autopart International CV Axle Assembly  Front Left
  • Premium OE Design
  • 100% NEW
Brand: Autopart International
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2017 - Ford Escape Front Left L 4 Cyl 2.0L 122 1999
Cardone
2017 Ford Escape CV Axle Assembly - Front Left Cardone - CV Axle Assembly

P311-1608EE0    66-2284  New

CV6Z3B437A , CV6Z3B437B

Qty:
In Stock & Ready to Ship
$93.59
Cardone CV Axle Assembly  Front Left
  • CV Axle Assembly
  • Product Attributes:
    • ABS Ring Included: No
    • Axle Nut Locking Type: Self-lock
    • Compressed Length (in): 27.32
    • E-Waste: No
    • FAQs:
      • Always Use The Proper Press Type Tool To Remove The Old Stub Shaft. Never Strike The Outer Joint Stub Shaft With A Hammer. It Will Damage The Unit And Possibly Do Damage To The Hub Bearing Assembly.
      • Are The Cv Drive Axle Shafts Balanced At The Factory?
      • Can I Let The Cv Drive Axles Hang While I Am Working On The Car?
      • I Hear A Grinding Noise From The Front End While Driving And See Grease On The Chassis And Suspension. What Is Causing This?
      • I Installed A Replacement Cv Drive Axle And Now My Abs Light Is On And Won't Go Out. Why?
      • I Removed Both Cv Drive Axles At The Same Time And Now I Am Having Problems Reinstalling Them. What Can I Do?
      • Is It Ok To Use An Impact Hammer To Install The Retaining Nut?
      • Never Allow The Cv Drive Axles To Hang Unsupported. This Can Lead To Axle Separation And Damage To The Inner Joint.
      • Never Use An Impact Wrench To Install The Retaining Nut On The Cv Drive Axle. Always Use A Torque Wrench And Torque The Nut To Manufacture's Specifications.
      • No! A Prevailing Torque Lock Nut Should Never Be Reused. Always Discard The Old Nut And Install A New One.
      • Shafts Are Inspected 100% For Run Out To Prevent Vibrations.  Only Shafts That Meet The Specifications For Run Out Are Utilized In The Remanufacturing Of A Cv Drive Axle Assembly.
      • The Cv Drive Axle Outboard Joint Stub Shaft Is Stuck In The Hub Assembly. What's The Best Way To Remove It?
      • The Most Likely Cause Is A Broken Bearing Cage Due To Excessive Torque Load.  This Is Typically An Outboard Joint Problem.
      • The Most Likely Cause Is A Defective Or Worn Outer Cv Drive Axle Joint. It May Be Time To Get It Replaced.
      • The Most Likely Cause Is The Drive Train Shifting In The Chassis Due To A Broken Engine Mount Or Hardware, Causing Misalignment Of The Cv Drive Axle And Causing The Inner Joint To Bind Or Hang Up.
      • The Most Likely Problem Is The Outer Cv Drive Axle Boot Has Ruptured, Causing The Grease To Leak Out, Allowing Contamination (water And Dirt) To Enter And Damage The Joint.
      • The Old Cv Drive Axle Has A Locking Style (prevailing Torque) Nut.  Should I Reuse It?
      • The Transaxle Gear Alignment Has Been Lost. On Some Vehicles It Will Be Necessary To Disassemble The Transaxle To Properly Align The Output Gears. Always Remove And Install One Cv Drive Axle At A Time.
      • The Wheels Wobble When I Make A Turn. What's The Problem?
      • When I Cut The Wheel Hard And Step On The Gas, I Hear Loud Clicking And Snapping. What's Making That Noise?
      • When I Replace The Cv Drive Axles, Should I Reuse The Old Seals?
      • When I Step On The Gas, I Hear A Loud Thump And Feel A Bad Vibration. What's Wrong?
      • When Replacing Cv Drive Axle Assemblies, Always Install New Transaxle Seals To Avoid Leaking.
      • When The Replacement Drive Axle Was Installed, The Sensor Ring, Sensor, Or Sensor Wiring On Or Near The Axle Was Damaged, Causing An Erratic Speed Signal To The Abs Module And Setting The Light On.
    • Features and Benefits:
      • A New Axle Retaining Nut Is Supplied With Every Unit For A Hassle-free Installation, Due To The Likelihood That The Original Retaining Nut Is Worn Or Stripped
      • Boot Clamps Are Pneumatically Crimped, Creating A Perfect Seal Between The Boot And Housing
      • Cv Drive Axle Measurements Are Validated After Assembly To Ensure A Proper Fit
      • Cv Drive Axle Part Numbers With An “hd” Suffix Are Severe-duty Applications And Include A Thermoplastic Outboard Boot For Increased Life And Durability Versus A Traditional Neoprene Boot.
      • High-quality Grease Withstands High-temperature And High-torque Demands To Ensure Long-lasting, Reliable Performance
      • Neoprene Boots Are Designed With Additional Bellows, When Needed, To Resist Bellow Stress And Cracking, Which Is The Leading Cause Of Boot Failure
      • Proprietary Engineering Processes Ensure That All Cv Drive Axles Meet O.e. Form, Fit And Function
      • Splines Are Precision Rolled To Ensure Proper Fit Of Cv Drive Axle Into The Mating Hub And Transmission, Which Eliminates Installation Hassles
      • Threads Are Precision Rolled To Ensure Proper Fit When Axle Nut Is Installed
      • Transmission Seal Diameter Is Precision-machined After Heat Treatment To Ensure Correct Surface Finish, Promoting Long Seal Life
    • Input Shaft Connection Style: Splined
    • Input Shaft Spline Count: 35
    • Output Shaft Connection Style: Splined
    • Output Shaft Spline Count: 27
    • Package Contents: Complete Axle, Instruction Sheet
    • Product Condition: New
    • Spindle Nut Included: Yes
  • CARDONE's extensive experience in testing and engineering CV Drive Axles is the foundation behind our proprietary method of engineering a product that meets and even exceed O.E. performance. We have researched the reasons why original CVs typically fail and designed new solutions to avoid repeat failure. For example, our Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and ozone cracking - the leading cause of boot failure. Additionally, all CV Drive Axle shafts are individually verified for straightness, resulting in vibration-free performance at all speeds.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
2017 - Ford Escape Front Left
Motorcraft
2017 Ford Escape CV Axle Assembly - Front Right Motorcraft

P311-411DD0D    W0133-4459006  New

Qty:
In Stock & Ready to Ship
$262.44
Motorcraft CV Axle Assembly  Front Right
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • Production: 06/01/2016-08/17/2016
  • Must Also Replace Bearing Retainer YS4Z-3N324-AA.
Brand: Motorcraft
Position: Front Right
Additional Fitment Information:
Vehicle Submodel Position Prod. Date Range
2017 - Ford Escape S Front Right Fr:06-01-16 To:08-17-16
Motorcraft
2017 Ford Escape CV Axle Assembly - Front Right Motorcraft

P311-411DD0D    W0133-4459006  New

Qty:
In Stock & Ready to Ship
$262.44
Motorcraft CV Axle Assembly  Front Right
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • Production: 08/17/2016-
  • Must Also Replace Bearing Retainer YS4Z-3N324-AA.
Brand: Motorcraft
Position: Front Right
Additional Fitment Information:
Vehicle Submodel Position Prod. Date Range
2017 - Ford Escape S Front Right Fr:08-17-16
Motorcraft
2017 Ford Escape CV Axle Assembly - Front Right Motorcraft

P311-411DD0D    W0133-4459006  New

Qty:
In Stock & Ready to Ship
$262.44
Motorcraft CV Axle Assembly  Front Right
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 100% New
  • Production: -06/01/2016
  • Must Also Replace Bearing Retainer YS4Z-3N324-AA.
Brand: Motorcraft
Position: Front Right
Additional Fitment Information:
Vehicle Submodel Position Prod. Date Range
2017 - Ford Escape S Front Right To:06-01-16

Showing 1 - 10 of 16 Products for CV Axle Assembly.