This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Aisan
Additional Fitment Information:
Vehicle
2015 - Scion iQ
Electric Fuel Pump Holley
P311-3CB70E712-802-1New
Qty:
In Stock & Ready to Ship
$259.75
Electric Fuel Pump
Electric Fuel Pump; Free Flow GPH 110; Gasoline; Carbureted; 3/8 in. NPT Inlet/Outlet Size; Silver Body/Silver Bracket/Red Logo;
Product Attributes:
Ball Material:Silver
Body Color:Silver
Bracket Color:Silver
Free Flow GPH:110
Fuel System Type:Carbureted
Fuel Type:Gasoline
Fully Open:416
Housing Color:Silver
Inlet Size:0.375 In. Npt
Motor Finish:Silver
Outlet Size:0.375 In. Npt
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
Tumble Polished Billet Look
Lower Housing Casting Designed For Enhanced Fuel Flow
Motor Draws Only 3 Amps Current
Relay Kit P/N 12-753 And 7 1/2 Amp Fuse Recommended
Improved Design For Street/Strip Applications
Distinctive Blue Logo
Flows 110 gph
Flows 88 gph At 9 PSI
Maximum Pressure Is 14 PSI
Includes P/N 12-803 Fuel Pressure Regulator
Provides Constant Fuel Flow With No Pulsation
Has Externally Accessible Pressure Relief Valve Max 14 PSI
The world famous Red, Blue and Black fuel pumps are the most recognized performance pumps of all times. They have been powering racing legends and street enthusiasts alike since the early 70s. Their time proven rotor/vane design is known to get the job done in an affordable package.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Electric Fuel Pump Holley
P311-02A089019-168New
Qty:
In Stock & Ready to Ship
$466.94
Electric Fuel Pump
Electric Fuel Pump; Replacement 400 LPH Fuel Pump; Includes Hanger Assembly; 1/4 in. NPT Inlet/Outlet;
Product Attributes:
Free Flow GPH:105
Fuel Type:Gasoline
Inlet/Outlet Diameter:0.250 In.
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
In Tank Wire Harness
Up to 100 psi
400 LPH Electric Fuel Pump Assembly for Sniper EFI Fuel Tanks. Oven brazed fittings can withstand 100 psi. Genuine Walbro Fuel Pump included.1/4 in. NPT Supply and Return line. For a better seal use Permatex IndianHead Gasket Shellac Compound or Aviation Form-A-Gasket sealant on the gasket and screws.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Electric Fuel Pump Holley
P311-579867312-425New
Qty:
In Stock & Ready to Ship
$87.69
Fuel Pump Electrical
Fuel Pump Electrical; 25 GPH; 1.5-2.5 PSI; Includes Fuel Filter/Fittings/Mounting Hardware; For Use w/Power Sport/Lawn And Garden Applications;
Product Attributes:
Ball Material:Black
Body Color:Black
Free Flow GPH:25
Fuel System Type:Carbureted
Fuel Type:
Diesel
E85
Gasoline
Fully Open:95
Hose Size:0.3125 In.
Housing Color:Black
Inlet Diameter:0.1250 In.
Inlet Size:0.125 In. Npt
Maximum PSI:4
Motor Finish:Black
Outlet Size:0.125 In. Npt
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
25 gph
1.5-2.5 psi
Mighty Mite dependability for your ATV or Lawn and Garden equipment. Building on the proven performance of the Mighty Mite fuel pumps, Holley is proud to announce a new addition to our lineup. Capable of 25 gph and 1.5-2.5 psi, these 12 volt universal pumps can be a great replacement for any equipment that you have. They are constructed from a reliable solid state design for longer life and compatible with all fuels and fuel mixtures.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
Tumble Polished Billet Look
Lower Housing Casting Designed For Enhanced Fuel Flow
Improved Design For Street/Strip Applications
Distinctive Black Logo
Compatible With Alcohol Or Methanol Fuels
Flows 140 gph Free Flow
Flows 120 gph At 9 PSI
Maximum Pressure Is 14 PSI
3/8 in. Npt Inlet and Outlet Ports
Motor Draws Only 4 Amps Current
Provides Constant Fuel Flow With No Pulsation
Can Be Serviced From The Pump End
The world famous Red, Blue and Black fuel pumps are the most recognized performance pumps of all times. They have been powering racing legends and street enthusiasts alike since the early 70s. Their time proven rotor/vane design is known to get the job done in an affordable package.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Electric Fuel Pump Holley
P311-45893C612-1800New
Qty:
In Stock & Ready to Ship
$652.66
Dominator In-Line Billet Fuel Pump
Dominator In-Line Billet Fuel Pump; Free Flow GPH 200; Free Flow LPH 757; EFI; 10 AN O-Ring - 78-14 SAE Inlet/Outlet; Supports Up To 1800 EFI Or 2100 Carb HP;
Product Attributes:
Body Color:Black Anodized
Forced Induction HP@43PSI:1400
Forced Induction HP@60PSI:1200
Forced Induction HP@8PSI:1600
Free Flow GPH:200
Fuel System Type:
Carbureted
Efi
Fuel Type:
Diesel
E85
Gasoline
GPH@43PSI:156
GPH@60PSI:140
GPH@8PSI:200
Housing Color:Black Anodized
LPH@43PSI:530
LPH@60PSI:590
LPH@8PSI:720
Naturally Aspirated HP@43PSI:1800
Naturally Aspirated HP@60PSI:1600
Naturally Aspirated HP@8PSI:2100
Outlet Size:10an O-ring - 0.875 In. - 14 Sae
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
Billet Aluminum Construction For Durability and Good Looks
10AN O-Ring Inlet/Outlet For High Flow and Superior Sealing
Excellent For Use With Carbureted Or EFI Applications
Fully Submersible In Tank
Compatible With 12V To 18.5V Systems For Street Or Race Use
Compact For Easy Installation On Frame Rails Or Other Tight Areas
Twin Pump Design Allows The Use Of Both Pumps
Patent Pending Dual Pump Technology
Proven Durability Beyond 3000 Hours In Gasoline Or Diesel Fuels
Weighs Only 5.1 lbs..
Current Draw At 43 PSI and 13.5 Vdc Is 17.2 Amps
Need to feed some serious horsepower? Have a nitrous or forced induction powerplant that also sees street duty? Holleys Dominator(TM); in-line fuel pumps are the answer! The patent pending twin pump design allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost! By staging the second pump, you eliminate the unnecessary recirculating and heating of extra fuel which can lead to poor performance and hot fuel issues. For hard core race vehicles, both pumps can be wired for full time duty to get maximum performance and are proven with 18.5 volt compatibility at pressures up to 80 psi. At only 5.1 lbs., they weigh half a pound less than competitive 1000+ horsepower pumps yet have twice the features!
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
Improved Hot Fuel Handling
Billet Aluminum Construction For Durability and Good Looks
10AN O-Ring Inlet/Outlet For High Flow and Superior Sealing
Excellent For Use With Carbureted Or EFI Applications
Fully Submersible In-Tank Space Savings and Less Plumbing
Compatible With 12V To 18.5V Systems For Street Or Race Use
Compact For Easy Installation On Frame Rails Or Other Tight Areas
Twin Pump Design Allows The Use Of Both Pumps
Patent Pending Dual Pump Technology
Proven Durability Beyond 3000 Hours In Gasoline
Weighs Only 5.1 lbs..
Max Current Draw Is 28 Amps
Need to feed some serious horsepower? Have a nitrous or forced induction powerplant that also sees street duty? Holleys Dominator(TM); in-line fuel pumps are the answer! The patent pending twin pump design allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost! By staging the second pump, you eliminate the unnecessary recirculating and heating of extra fuel which can lead to poor performance and hot fuel issues. As an added benefit for the hard core enthusiasts that run events like Hot Rod Power Tour and the Baja 1000, the extra pump offers the peace of mind that you will always finish what you start! For hard core race vehicles, both pumps can be wired for full time duty to get maximum performance and are proven with 18.5 volt compatibility at pressures up to 80 psi. Holley engineers have designed 12-1600 to feature improved hot fuel handling capabilities. It was designed to greatly reduce the negative effects of heated fuel now common with many of todays pump gas blends. It is available for use with pump gas or race gas. If you are using E-85 or diesel, no need to worry, Holley has still got you covered with the 12-1800 Dominator Fuel Pump. At only 5.1 lbs., they weigh half a pound less than competitive 1000+ horsepower pumps yet have twice the features!
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Electric Fuel Pump Holley
P311-273F7E212-429New
Qty:
In Stock & Ready to Ship
$148.22
Mighty Might Electric Fuel Pump
Mighty Might Electric Fuel Pump; 12-15 PSI; 50 GPH; For Use w/Street/Agriculture/Construction Applications;
Product Attributes:
Free Flow GPH:50
Fuel System Type:Carbureted
Fuel Type:
Diesel
E85
Gasoline
Inlet Thread Type:1/8 In. Npt
Outlet Size:0.125 In. Npt
WARNING CA Proposition 65:No
Features:
Includes 6 screws/2 Gaskets
Pumps are designed for use on all low and high pressure carburetor equipped automobiles, trucks, vans, generators, agriculture, gasoline and diesel engines, marine, construction and agriculture utility equipment. The 12 volt pumps perform in a 12-15 psi range at 50 GPH. Can be used as a lift / priming pump for most diesel engines. Compatible with all fuels and additives. These pumps can be a perfect OE replacement for any of your equipment. Rugged solid state design pumps are a simple two wire hook-up and made in the USA.A regulator may be needed for carbureted applications requiring less fuel pressure. We recommend the Holley 12-803 or 12-804 fuel pressure regulator. Overall dimensions- 4 in.x 3 in.x 3 in.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
Tumble Polished Billet Look
Lower Housing Casting For Fuel Flow and Quiet Operation
Improved Design For Street/Strip Applications
Distinctive Black Logo
Compatible With Alcohol Or Methanol Fuels
Flows 140 Gph (Free Flow)
Flows 120 gph At 9 PSI
Maximum Pressure Is 14 PSI
3/8in. Npt Inlet and Outlet Ports
Motor Draws Only 4 Amps Current
7 1/2 Amp Fuse Recommended
Provides Constant Fuel Flow With No Pulsation
The world famous Red(R), Blue(R) and Black(R) fuel pumps are the most recognized performance pumps of all times. They have been powering racing legends and street enthusiasts alike since the early 70s. Their time proven rotor/vane design is known to get the job done in an affordable package. Designed with a fume tube for marine use and meets U.S. Coast Guard regulations.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Electric Fuel Pump Holley
P311-3EE595312-600New
Qty:
In Stock & Ready to Ship
$424.50
HP Fuel Pump
HP Fuel Pump; FreeFlow GPH 65; FreeFlow LPH 246; Electric; 10 AN O-Ring; 7/8-14 SAE Inlet/8 AN O-Ring; 3/4-16 SAE Outlet; Pump Or Race Gas; Carb Or EFI;
Product Attributes:
Body Color:Black Anodized
Forced Induction HP@43PSI:450
Forced Induction HP@60PSI:380
Free Flow GPH:67
Fuel System Type:
Carbureted
Efi
Fuel Type:Gasoline
GPH@43PSI:48
GPH@60PSI:41
GPH@8PSI:65
Housing Color:Black Anodized
LPH@43PSI:155
LPH@60PSI:181
LPH@8PSI:230
Naturally Aspirated HP@43PSI:600
Naturally Aspirated HP@60PSI:500
Naturally Aspirated HP@8PSI:730
Outlet Size:8an O-ring - 0.750 In. - 16 Sae
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
Billet Aluminum Construction For Durability and Good Looks
Excellent For Use With Carbureted Or EFI Applications
Fully Submersible In-Tank For Space Savings/Less Plumbing
Compatible With 12V To 18.5V Systems For Street Or Race Use
Compact For Easy Installation On Frame Rails Or Other Tight Areas
Proven Durability Beyond 3000 Hours In Gasoline
Weighs Only 3.1 lbs..
10 Amp Maximum Amp Draw
Holleys HP(TM); In-Line Billet Fuel Pumps are designed to be the perfect companion to your carbureted or fuel injected race car, off-road truck or any engine needing fuel! The HP(TM); fuel pumps feature OEM gerotor technology which yields lightweight, quiet operation and 100,000+ mile durability in a cost effective, attractive package. The 12-600 features improved hot fuel handling capabilities and was designed to greatly reduce the negative effects of heated fuel now common with many of todays pump gas blends. It is compatible for use with pump gas or race gas. If you are using E-85 or diesel, no need to worry, Holley has still got you covered with the 12-890 fuel pump. HP fuel pumps work well on the street or in racing applications with up to 18.5 volt charging systems and 80 psi
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Showing
1 -
10
of
74 Products for Electric Fuel Pump.