802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle

Choose your Engine for your 2015 Ford Explorer

  • 4 Cyl 2.0L
  • 6 Cyl 3.5L

Shop By Brand

The Following brands are available based on your search.

  • Cardone
    Cardone
  • Dorman
    Dorman
  • Genuine
    Genuine

Showing Products For 2015 Ford Explorer Fuel Injection Throttle Body

Below are all the different brands and applications for 2015 Ford Explorer Fuel Injection Throttle Body

Showing 1 - 7 of 7 Products for Fuel Injection Throttle Body.

Refine Your Search

Dorman
2015 Ford Explorer Fuel Injection Throttle Body Dorman

P311-1FFE994    977-328  New

AT4Z9E926A , AT4Z9E926B , 676018 , S20068

Qty:
$179.16
Dorman Fuel Injection Throttle Body
  • Product Attributes:
    • Adjustable: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm ?Çô Www.p65warnings.ca.gov
    • Color/Finish: Gray
    • Connector/Terminal Type: Male/pins
    • Electrical Connection Type: Female Socket
    • Housing Material: Aluminum
    • Installation Hardware Included: No
    • Terminal Count: 6
    • Throttle Body Mounted: No
Brand: Dorman
Additional Fitment Information:
Vehicle Aspiration
2015 - Ford Explorer Naturally Aspirated
Cardone
2015 Ford Explorer Fuel Injection Throttle Body 6 Cyl 3.5L Cardone - Reman. A-1 CARDONE Throttle Body

P311-459E7B1    67-6018  Remanufactured

AT4Z9E926B

Qty:
$22.50 $172.28
Cardone Fuel Injection Throttle Body
  • Remanufactured Throttle Body
  • Reman. A-1 CARDONE Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray/unfinished
    • Housing Material: Aluminum
    • Package Contents: Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Electronic Throttle Body is first disassembled and meticulously inspected. Then, each component is inspected, remanufactured or replaced, resulting in reliable and consistent performance. Every ETB is tested for all critical functions, including response time and airflow at multiple points. A proprietary cleaning process prevents the throttle bore surface from being deformed, ensuring optimum airflow and peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
2015 - Ford Explorer Naturally Aspirated V 6 Cyl 3.5L 213 3496
Cardone
2015 Ford Explorer Fuel Injection Throttle Body 4 Cyl 2.0L Cardone - Reman. A-1 CARDONE Throttle Body

P311-14A41D2    67-6025  Remanufactured

CP9Z9E926A

Qty:
$13.50 $99.99
Cardone Fuel Injection Throttle Body
  • Remanufactured Throttle Body
  • Reman. A-1 CARDONE Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray /unfinished
    • Housing Material: Aluminum
    • Idle Air Control Motor Included: No
    • Package Contents: Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Electronic Throttle Body is first disassembled and meticulously inspected. Then, each component is inspected, remanufactured or replaced, resulting in reliable and consistent performance. Every ETB is tested for all critical functions, including response time and airflow at multiple points. A proprietary cleaning process prevents the throttle bore surface from being deformed, ensuring optimum airflow and peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2015 - Ford Explorer L 4 Cyl 2.0L 122 1999
Cardone
2015 Ford Explorer Fuel Injection Throttle Body 6 Cyl 3.5L Cardone - New CARDONE SELECT Throttle Body

P311-44294A0    6E-6018  New

AT4Z9E926B

Qty:
$64.63
  • New Throttle Body
  • New CARDONE SELECT Throttle Body
  • Product Attributes:
    • Bore Diameter (in/mm): 60
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Are Your New Throttle Bodies The Same Design As Oe?
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No, Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The New Electronic Throttle Body Is Designed And Manufactured To Meet Oe Manufacturer Standards.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • What Causes The Electronic Throttle Body To Fail?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
      • When Installing The New Electronic Throttle Body There Is No Need To Modify The Vehicle For Installation.
      • Will I Have To Modify Anything On The Vehicle To Install Your New Throttle Body?
    • Features and Benefits:
      • 100% Computerized Testing Of Motor, Throttle Position Sensor And Articulation Ensures Reliable And Consistent Performance.
      • Critical Components Used In Manufacturing The New Electronic Throttle Body, Including The Housing, Throttle Plate, Position Sensors, Throttle Actuator Motor And Throttle Plate Return Spring Conform To O.e. Dimensions.
      • Each Throttle Body Is Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points, Which Helps To Guarantee A Consistently Optimal Fuel/air Ratio.
      • Each Unit Is Guaranteed To Fit And Function Like The Original.
    • Gasket or Seal Included: No
    • Housing Color/Finish: Grey / Finished
    • Housing Material: Aluminum
    • Idle Air Control Motor Included: No
    • Inlet Diameter (in/mm): 73
    • Inlet Type: Round
    • Original Equipment Replacement: No
    • Outlet Diameter (in/mm): 73
    • Outlet Type: Round
    • Package Contents: Etb, Instruction Sheet
    • Product Condition: New
    • Throttle Body Type: Electric
    • Throttle Body Actuation Type: Electric
    • Throttle Body Finish: Finished
    • Throttle Body Inlet Shape: Round
    • Throttle Body Material: Aluminum, Steel, Plastic
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
    • Venturi Quantity: 1
  • Because of the exacting standards of our proprietary reverse-engineering processes, all CARDONE Electronic Throttle Bodies are guaranteed to fit and function like the original. Critical components such as the ETB housing, throttle plate, position sensors, and throttle actuator motor, all conform to the specifications and dimensions as designed by the OE Manufacturer – meaning each ETB is guaranteed to last and perform consistently under all driving conditions.
Brand: Cardone
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
2015 - Ford Explorer Naturally Aspirated V 6 Cyl 3.5L 213 3496
Dorman
2015 Ford Explorer Fuel Injection Throttle Body 4 Cyl 2.0L Dorman

P311-4C6B303    977-601  New

CM5E9F991AD , CP9Z9E926A , S20173

Qty:
$164.46
Dorman Fuel Injection Throttle Body
  • Product Attributes:
    • Adjustable: No
    • Bore Diameter: 2.325 In.
    • California Proposition 65: Warning: Cancer And Reproductive Harm ?Çô Www.p65warnings.ca.gov
    • Color/Finish: Silver
    • Connector/Terminal Type: Blade
    • Electrical Connection Type: Female Blade
    • Fuel Injectors Included: No
    • Fuel System Type: Gas
    • Gasket or Seal Included: No
    • Housing Material: Aluminum
    • Idle Air Control Motor Included: No
    • Inlet Quantity: 0
    • Installation Hardware Included: No
    • Outlet Quantity: 0
    • Package Contents: 1 Fuel Injection Throttle Body
    • Terminal Count: 6
    • Throttle Body Mounted: No
    • Throttle Body Spacer Included: No
    • Throttle Body Type: Electronic
    • Throttle Position Sensor Included: Yes
    • Venturi Quantity: 0
Brand: Dorman
Additional Fitment Information:
Vehicle Block Engine CID CC
2015 - Ford Explorer L 4 Cyl 2.0L 122 1999
Genuine
2015 Ford Explorer Fuel Injection Throttle Body Genuine

P311-25D4D83    W0133-2021820  New

Qty:
$126.81
Genuine Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Includes Throttle Body Actuator.
Brand: Genuine
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle Aspiration
2015 - Ford Explorer Naturally Aspirated
Cardone
2015 Ford Explorer Fuel Injection Throttle Body 4 Cyl 2.0L Cardone

P311-07B279F    W0133-2021818  New

Qty:
$20.00 $299.87
Cardone Fuel Injection Throttle Body
  • Remanufactured
  • Includes Throttle Body Actuator
Brand: Cardone
Free Ground Shipping on this item
Additional Fitment Information:
Vehicle Block Engine CID CC
2015 - Ford Explorer L 4 Cyl 2.0L 122 1999

Showing 1 - 7 of 7 Products for Fuel Injection Throttle Body.