Finish Selecting Your Vehicle

Choose your Submodel for your 2015 Chevrolet Traverse

  • LS
  • LT
  • LTZ

Shop By Brand

The Following brands are available based on your search.

  • Airtex
    Airtex
  • AutoBest
    AutoBest
  • Bosch
    Bosch
  • Carter
    Carter
  • Delphi
    Delphi
  • Holley
    Holley
  • LKQ
    LKQ
  • TYC Products
    TYC Products

Showing Products For 2015 Chevrolet Traverse Fuel Pump Module Assembly

Below are all the different brands and applications for 2015 Chevrolet Traverse Fuel Pump Module Assembly

Showing 1 - 10 of 25 Products for Fuel Pump Module Assembly.

Refine Your Search

Delphi
2015 Chevrolet Traverse Fuel Pump Module Assembly Delphi

P311-2A038A7    W0133-3917200  New

Qty:
In Stock & Ready to Ship
$427.92
Delphi Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Lifetime Warranty
  • w/o Fuel Level Sender
  • Fuel Tank Sending Unit Serviced Separately
Brand: Delphi
Additional Fitment Information:
Vehicle
2015 - Chevrolet Traverse
Carter
2015 Chevrolet Traverse Fuel Pump Module Assembly 6 Cyl 3.6L Carter

P311-510016A    P76830M  New

1234702 , 19181841 , 19207494 , 19329336 , 22783658 , 22833390 , 22957143 , 2920808 , 69787 , A30461 , B11112423TG , C-0297-M , C0297M , E3790M , FG1371 , M3520868 , MU2114 , SP6657M

Qty:
In Stock & Ready to Ship
$224.17
Carter Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • May Require Wiring Harness 888-601. Check Prior to Installation
  • Product Attributes:
    • Connector Color: Black
    • Connector Gender: Female
    • Connector Shape: Oval
    • Fuel Filter Included: No
    • Fuel Sending Unit Included: Yes
    • Grade Type: Regular
    • Minimum Flow Rating: 29
    • Minimum Pressure: 62.0
    • Mounting Hardware Included: No
    • Outlet Fitting Thread Size: 3/8
    • Pump Type: Electric
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Voltage: 12v
    • Wire Harness Included: No
    • Wire Quantity: 4
    • Wiring Harness Length: 300.0
  • The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
Brand: Carter
Additional Fitment Information:
Vehicle Block Engine CID CC
2015 - Chevrolet Traverse V 6 Cyl 3.6L 217 3564
Airtex
2015 Chevrolet Traverse Fuel Pump Module Assembly 6 Cyl 3.6L Airtex

P311-19DDC56    E3790M  New

1234702 , 19181841 , 19207494 , 19329336 , 22783658 , 22833390 , 22957143 , 2920808 , 69787 , A30461 , B11112423TG , C0297M , E3790M , FG1371 , M100059 , M10193 , M3520868 , MU2114 , MU2209 , P76830M , SP6657M

Qty:
In Stock & Ready to Ship
$241.28
Airtex Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • May Require Wiring Harness 888-601. Check Prior to Installation
  • Product Attributes:
    • Connector Color: Black
    • Connector Gender: Female
    • Connector Shape: Oval
    • Filter Included: No
    • Flow Rate: 29
    • Fuel Sending Unit Included: Yes
    • Grade Type: Regular
    • Minimum Flow Rating: 29
    • Minimum Pressure: 62.0
    • Mounting Hardware Included: No
    • Outlet Fitting Thread Size: 3/8
    • Pump Type: Electrical
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Voltage: 12v
    • Wire Quantity: 4
    • Wiring Harness Included: No
    • Wiring Harness Length: 300.0
  • The Airtex Fuel Systems program features unique innovation and solutions by offering premium fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features. Airtex Fuel Pump Modules, Hanger Assemblies, Tank Reservoirs, and Tank Sender Assemblies are built to meet or exceed OEM fit and reliability. Most applications include the necessary accessories such as tank seals, patented high-gradient density strainers and wiring harnesses. Fuel sensor design provides resistance to corrosive fuel blends and additives.
Brand: Airtex
Additional Fitment Information:
Vehicle Block Engine CID CC
2015 - Chevrolet Traverse V 6 Cyl 3.6L 217 3564
TYC Products
2015 Chevrolet Traverse Fuel Pump Module Assembly 6 Cyl 3.6L TYC Products - TYC CRQ Premium Fuel Pump Module

P311-5ED6700    150387-A  New

19207494 , 19370465 , E3790M

Qty:
In Stock & Ready to Ship
$101.93
TYC Products Fuel Pump Module Assembly
  • TYC Fuel Pump Module Assembly
  • TYC CRQ Premium Fuel Pump Module
Brand: TYC Products
Additional Fitment Information:
Vehicle Submodel Body Block Engine CID CC
2015 - Chevrolet Traverse LT Sport Utility V 6 Cyl 3.6L 217 3564
AutoBest
2015 Chevrolet Traverse Fuel Pump Module Assembly 6 Cyl 3.6L AutoBest

P311-46D6F8A    F2701A  New

Qty:
In Stock & Ready to Ship
$136.21
AutoBest Fuel Pump Module Assembly
  • Includes Fuel Pump, Fuel Pressure Regulator, Tank Pressure Sensor, Fuel Reservoir, Fuel Strainer and Tank Seal
  • Product Attributes:
    • Inlet Diameter: 0.314
    • Outlet Diameter: 0.374
Brand: AutoBest
Additional Fitment Information:
Vehicle Block Engine CID CC
2015 - Chevrolet Traverse V 6 Cyl 3.6L 217 3564
Bosch
2015 Chevrolet Traverse Fuel Pump Module Assembly 6 Cyl 3.6L Bosch - Fuel Pump Module Assembly (New)

P311-1794196    69787  New

19329336 , 19370465 , 22833390

Qty:
In Stock & Ready to Ship
$226.61
  • Bosch Fuel Pump Module Assembly
  • with Sender
  • Fuel Pump Module Assembly (New)
  • Product Attributes:
    • Cases Per Pallet (ORLY): 30
    • Electric Or Mechanical: Electric
    • Gaskets Included (Fuel Pump): Yes
    • In-Line Pump: N
    • Mounting Hardware Included: No
    • Negative Ground: No
    • Package Contents: 1 Module Assembly
    • Prefiltro usado con bomba: Yes
    • Prop 65 Warning Label Required?: No
    • Pump Only Or Module: Module
  • Features:
    • Bosch "Better than OE design", improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
    • Bosch Aftermarket Fuel Assemblies are built and tested to the same rigorous quality standards as our OE fuel pumps to ensure a long, reliable service life
    • Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
    • Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
    • All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.
  • Nuestro equipo de ingenieros de Bosch lleva los beneficios de las bombas de combustible premium al mercado de repuestos automotrices. Las bombas de combustible Bosch se fabrican en las mismas líneas de producción y luego se fabrican y luego se prueban con los mismos estándares de calidad rigurosos que las bombas de combustible Bosch de equipo original para garantizar una vida útil prolongada y confiable. Haga el trabajo bien la primera vez, siempre, con las bombas de combustible Bosch Premium.
Brand: Bosch
Additional Fitment Information:
Vehicle Block Engine CID CC
2015 - Chevrolet Traverse V 6 Cyl 3.6L 217 3564
Delphi
2015 Chevrolet Traverse Fuel Pump Module Assembly 6 Cyl 3.6L Delphi

P311-2DBC70D    FG1371  New

15969626 , 19167429 , 19329336 , 19370465 , 22753589 , 22783658 , 22833390 , 22957143 , 23240487 , 69787 , 84084766 , A30461 , A46024 , CFG1371 , E3790M , EP1031 , M100059 , M10059 , M3520868 , MU2114 , MU2209 , P76830M , SP6657M

Qty:
In Stock & Ready to Ship
$226.78
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 11
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 78.0
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 250.0
    • Resistance Ohms Full: 40.0
    • Strainer Included: Yes
    • System Pressure: 58 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Block Engine CID CC
2015 - Chevrolet Traverse V 6 Cyl 3.6L 217 3564
Delphi
Fuel Pump Module Assembly Delphi

P311-1AC5F71    FG1483  New

3924710C1 , EFG1483

Qty:
In Stock & Ready to Ship
$255.27
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 46
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 80.0
    • Notes: Used On 2012 F64 Navistar
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 180.0
    • Resistance Ohms Full: 10.0
    • Strainer Included: Yes
    • System Pressure: 54 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Delphi
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-473F3E1    12-131  New

Qty:
In Stock & Ready to Ship
$705.55
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Returnless; Installs In Any Tank From 7.25 in. To 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-3FEFDF7    12-130  New

Qty:
In Stock & Ready to Ship
$851.97
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Install In Any Tank From 6.5 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 25 Products for Fuel Pump Module Assembly.