Finish Selecting Your Vehicle

Choose your Engine for your 2015 BMW 428i xDrive Gran Coupe

  • 4 Cyl 2.0L

Shop By Brand

The Following brands are available based on your search.

  • Bosch
    Bosch
  • Delphi
    Delphi
  • Holley
    Holley
  • URO Parts
    URO Parts

Showing Products For 2015 BMW 428i xDrive Gran Coupe Fuel Pump Module Assembly

Below are all the different brands and applications for 2015 BMW 428i xDrive Gran Coupe Fuel Pump Module Assembly

Showing 1 - 10 of 21 Products for Fuel Pump Module Assembly.

Refine Your Search

Bosch
2015 BMW 428i xDrive Gran Coupe Fuel Pump Module Assembly Bosch

P311-2377430    W0133-2615977  New

Qty:
In Stock & Ready to Ship
$227.67
Bosch Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Bosch
Additional Fitment Information:
Vehicle
2015 - BMW 428i xDrive Gran Coupe
URO Parts
2015 BMW 428i xDrive Gran Coupe Fuel Pump Module Assembly - Right URO Parts

P311-58AB63B    16117243975  New

16 11 7 243 975 , 16 11 7 297 778 , 16 11 7 414 482 , 16117243975 , 66 120 , 66120 , E9214M , FG1884 , P77041M , SP5149M , URO-015524

Qty:
In Stock & Ready to Ship
$105.01
URO Parts Fuel Pump Module Assembly  Right
  • Fuel Pump Assembly
  • Product Attributes:
    • Electric Or Mechanical: Electrical
    • Flow Rate (gph): 180
    • Flow Restriction Pressure (psi): 80 Psi
    • Inlet Fitting Type: Hose Clamp
    • Outlet Fitting Type: Hose Clamp
    • Guaranteed fitment
    • Efficient impeller design maximizes fuel flow while minimizing current draw
    • Precision armature bearings for quiet operation and reduced vibration
    • Low-resistance motor brushes for durability and efficiency
    • Durable high-quality housing materials
    • Factory tested for proper operation
    • 24 Month Unlimited Mileage Warranty
Brand: URO Parts
Position: Right
Additional Fitment Information:
Vehicle Position
2015 - BMW 428i xDrive Gran Coupe Right
Bosch
2015 BMW 428i xDrive Gran Coupe Fuel Pump Module Assembly 4 Cyl 2.0L Bosch - Fuel Pump Module Assembly (New)

P311-2FF4153    66120  New

16117243975

Qty:
In Stock & Ready to Ship
$154.03
  • Bosch Fuel Pump Module Assembly
  • Fuel Pump Module Assembly (New)
  • Product Attributes:
    • Cases Per Pallet (ORLY): 48
    • Electric Or Mechanical: Electric
    • Gaskets Included (Fuel Pump): No
    • In-Line Pump: N
    • Mounting Hardware Included: No
    • Package Contents: 1 Module Assembly
    • Prop 65 Warning Label Required?: No
  • Features:
    • Bosch "Better than OE design", improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
    • Bosch Aftermarket Fuel Assemblies are built and tested to the same rigorous quality standards as our OE fuel pumps to ensure a long, reliable service life
    • Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
    • Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
    • All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.
  • Nuestro equipo de ingenieros de Bosch lleva los beneficios de las bombas de combustible premium al mercado de repuestos automotrices. Las bombas de combustible Bosch se fabrican en las mismas líneas de producción y luego se fabrican y luego se prueban con los mismos estándares de calidad rigurosos que las bombas de combustible Bosch de equipo original para garantizar una vida útil prolongada y confiable. Haga el trabajo bien la primera vez, siempre, con las bombas de combustible Bosch Premium.
Brand: Bosch
Additional Fitment Information:
Vehicle Block Engine CID CC
2015 - BMW 428i xDrive Gran Coupe L 4 Cyl 2.0L 122 1997
Delphi
2015 BMW 428i xDrive Gran Coupe Fuel Pump Module Assembly 4 Cyl 2.0L Delphi

P311-5B523F9    FG1884  New

16 11 7 243 975 , 16 11 7 297 778 , 16 11 7 414 482 , A30497 , CFG1884 , E9214M , P77041M , SP5149M

Qty:
In Stock & Ready to Ship
$481.66
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 10
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Outlet Outside Diameter: 0.375
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 990.0
    • Resistance Ohms Full: 50.0
    • Strainer Included: Yes
    • System Pressure: 70 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 5
    • Terminal Type: Blade
    • Vapor Pressure Sensor: No
    • Voltage: 12.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Block Engine CID CC
2015 - BMW 428i xDrive Gran Coupe L 4 Cyl 2.0L 122 1997
Delphi
Fuel Pump Module Assembly Delphi

P311-1AC5F71    FG1483  New

3924710C1 , EFG1483

Qty:
In Stock & Ready to Ship
$255.27
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 46
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 80.0
    • Notes: Used On 2012 F64 Navistar
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 180.0
    • Resistance Ohms Full: 10.0
    • Strainer Included: Yes
    • System Pressure: 54 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Delphi
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-473F3E1    12-131  New

Qty:
In Stock & Ready to Ship
$705.55
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Returnless; Installs In Any Tank From 7.25 in. To 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-3FEFDF7    12-130  New

Qty:
In Stock & Ready to Ship
$851.97
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Install In Any Tank From 6.5 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-1C60504    12-319  New

Qty:
In Stock & Ready to Ship
$451.09
Holley Fuel Pump Module Assembly
  • OEM Style EFI Fuel Tank Modules
  • OEM Style EFI Fuel Tank Modules; 255 LPH; Includes Fuel Level Sending Unit/Hydra Mat/Internal Fuel Pressure Regulator;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • In-Tank High Pressure 255 lph Unit
    • Fuel Pressure Is Internally Regulated To 58 PSI
    • A Pre-calibrated Fuel-level Sending Unit 73-10 Ohm
    • This Module Also Features A HydraMat Filter
    • HydraMart Filter Also Provides Protection From Contaminate
  • This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 550 horsepower

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-1236054    12-132  New

Qty:
In Stock & Ready to Ship
$778.76
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 450 LPH; Install In Any Tank From 7 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fuel Type:
      • E85
      • Gasoline
    • Fully Open: 450
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-5E83093    12-146  New

Qty:
In Stock & Ready to Ship
$639.51
Holley Fuel Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly
  • Fuel Cell EFI Pump Module Assembly; 12 Bolt Flange; 450 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
  • Product Attributes:
    • Flange Type: 12 Bolt
    • Free Flow GPH: 118
    • Fuel Type:
      • E85
      • Gasoline
    • Fully Open: 450
    • Inlet Size: 8an
    • Maximum PSI: 87
    • Outlet Size: 10an
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Update Your Fuel Cell To EFI The Easy Way
    • Designed To Drop Right In Your Existing 6/12 Bolt Flange
    • Billet Top Flange Housing
    • Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
  • Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 21 Products for Fuel Pump Module Assembly.