Finish Selecting Your Vehicle

Choose your Engine for your 2014 Hyundai Genesis Coupe

  • 4 Cyl 2.0L
  • 6 Cyl 3.8L

Shop By Brand

The Following brands are available based on your search.

  • AEM Electronics
    AEM Electronics
  • Beck Arnley
    Beck Arnley
  • Edelbrock
    Edelbrock
  • Genuine
    Genuine
  • Holley
    Holley
  • MSD
    MSD
  • Standard Ignition
    Standard Ignition
  • Walker Products
    Walker Products

Showing Products For 2014 Hyundai Genesis Coupe Fuel Injection Pressure Regulator

Below are all the different brands and applications for 2014 Hyundai Genesis Coupe Fuel Injection Pressure Regulator

Showing 1 - 10 of 24 Products for Fuel Injection Pressure Regulator.

Refine Your Search

Genuine
2014 Hyundai Genesis Coupe Fuel Injection Pressure Regulator Genuine

P311-4AD4A8D    W0133-1951393  New

Qty:
In Stock & Ready to Ship
$92.21
Genuine Fuel Injection Pressure Regulator
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Located on the IN-TANK Fuel Pump
Brand: Genuine
Additional Fitment Information:
Vehicle
2014 - Hyundai Genesis Coupe
Beck Arnley
2014 Hyundai Genesis Coupe Fuel Injection Pressure Regulator 4 Cyl 2.0L Beck Arnley

P311-08C5446    159-1007  New

Qty:
In Stock & Ready to Ship
$43.44
Beck Arnley Fuel Injection Pressure Regulator
  • FUEL INJECTION PRESSURE REGULATOR
  • In Tank Regulator
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle Block Engine CID CC
2014 - Hyundai Genesis Coupe L 4 Cyl 2.0L 122 1998
Standard Ignition
2014 Hyundai Genesis Coupe Fuel Injection Pressure Regulator 6 Cyl 3.8L Standard Ignition

P311-4A7EDB7    PR536  New

2-199104 , 24244 , 313803Q550 , 800-648

Qty:
In Stock & Ready to Ship
$59.82
Standard Ignition Fuel Injection Pressure Regulator
  • Fuel Pressure Regulator
  • Product Attributes:
    • Adjustable: Yes
    • Automotive Performance Item: No
    • Contents: Includes Caution Sheet
    • Fuel Type: Gas
    • Functions: Regulator
    • Mounting Type: Flange
    • New or Reman: New
    • Part Finish: Silver
    • Reference Port Included: No
    • Regulator Finish: Silver
    • Regulator Material: Steel
  • Our fuel pressure regulators come with high-temp Viton® o-rings to provide a high pressure seal under extreme heat conditions. Every fuel pressure regulator is manufactured with high-grade steel material to ensure resistance to corrosion and prolonged service life. Our fuel pressure regulators' internal solenoid coil windings are constructed with high-grade conductive material that allows for smooth and efficient control of the fuel pressure. Our fuel pressure regulator is quality tested to meet or exceed OEM specification, ensuring a quality product out of the box.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Block Engine CID CC
2014 - Hyundai Genesis Coupe V 6 Cyl 3.8L 231 3778
AEM Electronics
Fuel Injection Pressure Regulator AEM Electronics

P311-37B435D    25-302BK  New

Qty:
In Stock & Ready to Ship
$156.56
  • Adj Fuel Press Reg
  • Universal Adjustable Fuel Pressure Regulator, Black Anodized, Inlet 2 X -6 (9/16-18), Outlet -6 (9/16-18), Gauge Port 1/8-inch NPT
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Universal Adjustable Fuel Pressure Regulator. Black. Inlet: 2 X -6 (9/16-18) Outlet: -6 (9/16 in-18) Gauge Port: 1/8 inNPT

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: AEM Electronics
Additional Fitment Information:
Vehicle
Walker Products
Fuel Injection Pressure Regulator Walker Products

P311-0D00ACD    255-1023  New

143-7038 , 21069 , 217-352 , 21721 , 21794 , 5G1057 , 800-135 , FP10567 , PR103 , PR23

Qty:
In Stock & Ready to Ship
$112.75
  • Walker Products 255-1023 Fuel Injection Pressure Regulator
  • Product Attributes:
    • CA_Prop65_Lead: Warning: This Product Can Expose You To Chemicals, Including Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Walker Products began supplying the fuel system needs of the automotive industry in 1946. Today Walker is one of the largest, privately owned manufacturers of fuel system components and engine sensors, and has served the needs of the worldwide automotive aftermarket. We are committed to supplying products manufactured to meet or exceed OEM standards and specifications. This effort is backed by our own manufacturing, product management and engineering staff to ensure it is maintained and accurate in the production of quality parts, vehicle applications, instruction sheets and technical support. Our products include Carburetor and Fuel Injection Repair Kits, Oxygen Sensors and other Engine Management products such as Throttle Position Sensors, Cam and Crankshaft Sensors, Fuel Injectors, Spark Plug Wires and Gaskets. As an ISO 9001/IATF16949 certified company, we are committed to supplying the highest quality products.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Walker Products
Additional Fitment Information:
Vehicle
MSD
Fuel Injection Pressure Regulator MSD

P311-31A1348    2938  New

Qty:
In Stock & Ready to Ship
$324.14
MSD Fuel Injection Pressure Regulator
  • Atomic Fuel Pressure Regulator
  • Atomic Fuel Pressure Regulator; Flows 2.2 GPM; -6AN Inlet And Dual -6AN Outlets;
  • Product Attributes:
    • Pressure: 15-91 Psi
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Flows 2.2 GPM
    • -6AN Inlet and Dual -6AN Outlets
    • Boost Reference Port
  • MSD's Atomic EFI systems were designed with two goals; to simplify EFI and overall performance. Simplicity was achieved through wired-less technology for easy installation and programming. Performance is served through improved drivability from idle to full throttle blasts. Atomic EFI delivers.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
Edelbrock
Fuel Injection Pressure Regulator Edelbrock

P311-414B6C2    1728  New

Qty:
In Stock & Ready to Ship
$212.79
Edelbrock Fuel Injection Pressure Regulator
  • EFI Fuel Pressure Regulator
  • EFI Fuel Pressure Regulator-6 AN (180 GPH) in Black/Clear Finish
  • Product Attributes:
    • Pressure: 0-100 Psi
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Manufactured By Essex Industries
    • Machined From Aircraft-Quality Aluminum
    • Have Fluorosilicone Diaphragm Material
    • Mounting Bracket/Fittings/Hardware Included
  • The Edelbrock 1728 fuel pressure regulator is?machined from aircraft quality aluminum for those who demand the best. Edelbrock EFI fuel pressure regulators have an internal diaphragm made of fluorosilicone to ensure high temperature protection resulting in an extended life. They are compatible with all grades of gasoline, ethanol, methanol and E85 fuels. These regulators will hold fuel system pressure for at least 20 minutes after pump shutdown. Mounting bracket and hardware are included. Each regulator features a vacuum/boost compensating port for a supercharger, turbo or intake manifold vacuum connection. Regulator part #1728 has a black and clear finish with -6 inlet, outlet and return ports

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Fuel Injection Pressure Regulator Edelbrock

P311-3A10D43    3595  New

Qty:
In Stock & Ready to Ship
$106.61
Edelbrock Fuel Injection Pressure Regulator
  • EFI Fuel Pressure Regulator
  • Fuel Pressure Regulator
  • Product Attributes:
    • Pressure: Oem
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Fuel Rail Mount
    • Highest Quality Standards
    • Exact Fit
  • Edelbrock Fuel Pressure Regulator #3595 (for Performer MPFI kits)

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Fuel Injection Pressure Regulator Edelbrock

P311-48ABA08    174023  New

Qty:
In Stock & Ready to Ship
$202.63
Edelbrock Fuel Injection Pressure Regulator
  • EFI Fuel Pressure Regulator
  • EFI Fuel Pressure Regulator-10 AN (180 GPH) in Black Finish
  • Product Attributes:
    • Pressure: 0-100 Psi
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Manufactured By Essex Industries
    • Machined From Aircraft-Quality Aluminum
    • Have Fluorosilicone Diaphragm Material
    • Mounting Bracket/Fittings/Hardware Included
  • Edelbrock fuel pressure regulators #174023 are machined from aircraft quality aluminum for those who demand the best. These EFI fuel pressure regulators have an internal diaphragm made of fluorosilicone to ensure high temperature protection resulting in an extended life. They are compatible with all grades of gasoline, ethanol, methanol and E85 fuels. These regulators will hold fuel system pressure for at least 20 minutes after pump shutdown. Mounting bracket and hardware are included. Each regulator features a vacuum/boost compensating port for a supercharger, turbo or intake manifold vacuum connection.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Holley
Fuel Injection Pressure Regulator Holley

P311-293DAD2    12-879  New

Qty:
In Stock & Ready to Ship
$210.26
Holley Fuel Injection Pressure Regulator
  • Adjustable Billet By-Pass Fuel Regulator
  • Adjustable Billet By-Pass Fuel Regulator; Adjustable; 4-65 psi.; 3/8 in. NPT Outlet/Inlet; Boost Reference 1 To 1; EFI Bypass Style; Black Anodized Base/Clear Anodized Top;
  • Product Attributes:
    • Fuel System Type: Efi/carb
    • Fuel Type: Gasoline / Diesel / E85
    • Inlet Size: 0.375 In. Npt
    • Outlet Size: 0.375 In. Npt
    • Pressure: 4-65 Psi
    • Return Size: 0.375 In. Npt
    • Style: Bypass
    • WARNING CA Proposition 65: No
  • Features:
    • Adjustable From 4-65 Psi For Precise Fuel Pressure Adjustments
    • Billet Aluminum w/Black Anodized Base/Clear Top For Good Looks
    • Used In Systems With A Return Line Back To The Tank
    • Includes Fitting For Manifold Reference
    • Includes An 1/8 Npt Gauge Port
    • Boost Reference 1:1
  • Holley Billet Fuel Pressure Regulators are part of a complete line of fuel system products from Holley. They are precision machined from 6061-T6 billet aluminum for strength and durability. These regulators are adjustable from 4-65 psi and will handle both carbureted and EFI applications. A second pressure spring is included allowing you to increase the fuel pressure range up to 65 psi for EFI systems. They are offered with two port sizes, 3/8 in. NPT or 6AN to adapt to your new or existing fuel lines. So, if you are currently running a carbureted system but plan to upgrade to EFI in the future, these regulators will have you covered either way.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 24 Products for Fuel Injection Pressure Regulator.