2014 Freightliner Sprinter 2500 Fuel Injection Throttle Body Air and Fuel Delivery - Bosch, Cardone, FAST, Ford Performance, Holley, MSD

Bosch

2014 Freightliner Sprinter 2500 Fuel Injection Throttle Body 6 Cyl 3.0L Bosch

Part # P311-40851BB Manu # W0133-1984923 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $255.39

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Use (1) 642 141 01 80 Throttle Body Gasket.

Brand: Bosch

Vehicle	Block	Engine	CID	CC
2014 - Freightliner Sprinter 2500	V	6 Cyl 3.0L	-	2987

Bosch

2014 Freightliner Sprinter 2500 Fuel Injection Throttle Body 4 Cyl 2.1L Bosch

Part # P311-4B69913 Manu # W0133-2021835 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $167.24

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Use (1) 651 091 04 60 Throttle Body Gasket.

Brand: Bosch

Vehicle	Block	Engine	CID	CC
2014 - Freightliner Sprinter 2500	L	4 Cyl 2.1L	131	2143

2014 Freightliner Sprinter 2500 Fuel Injection Throttle Body 6 Cyl 3.0L Cardone - Fuel Injection Throttle Body

Part # P311-17DCD83 Manu # 67-5001 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 6420900270

Qty:

In Stock & Ready to Ship

Core Price: $22.50 Best Price: $210.05

Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
Fuel Injection Throttle Body
Product Attributes:
- E-Waste: Yes
- FAQs:
  - A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
  - Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
  - Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
  - Do You Sell Throttle Body Spacers?
  - How Do You Clean?
  - How Do You Test?
  - Is It Ok To Bypass The Coolant Hoses?
  - Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
  - No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
  - Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
  - Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
  - Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
  - The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
  - The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
  - The Oe Throttle Body Has Coolant Hoses Attached. What’s The Purpose?
  - The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
  - The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
  - We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
  - We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
  - We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore. For The Exterior We Use A Glass Bead Blasting Process. We Also Go Through Further Disassembly For Cleaning Of Internal Components.
  - What Causes The Electronic Throttle Body To Fail?
  - What Do You Replace?
  - What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
  - What Happens When An Electronic Throttle Body Fails?
  - What’s An Electronic Throttle Body?
  - When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
- Features and Benefits:
  - A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
  - Each Unit Is Guaranteed To Function Like The Original.
  - Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
- Housing Color/Finish: Gray/unfinished
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Package Contents: Electronic Throttle Body, Instruction Sheet
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Brand: Cardone

Vehicle	Block	Engine	CID	CC
2014 - Freightliner Sprinter 2500	V	6 Cyl 3.0L	-	2987

Fuel Injection Throttle Body MSD

Part # P311-19FC7EE Manu # 2910 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,833.16

Atomic EFI Basic Kit Throttle Body
Atomic EFI Basic Kit Throttle Body; Carburetor Replacement Upgrade To EFI TBI [Basic Kit]; Includes Throttle Body/Power Module/Wide Band O2 Sensor/Harnesses/Handheld Programmer;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Carb Approved
- 8 Connections
- Single Fuel Line
- Self Tuning
- No Laptop
- Fuel Pump And Regulator Not Included
The Atomic system is based on an easy-to-install throttle body design that will provide modern drive ability benefits to street rods and muscle cars – anything with a carburetor. Note the sanitary and traditional look of the unit. It's meant to replace a standard square bore carburetor and can be installed by the average car guy and a friend in a home garage with simple tools within a weekend. In fact, with a little preparation, you should be able to start Saturday morning and make the cruise that night! We wanted to make EFI easy which means less wiring, self learning technology and a return less fuel system. This means you can incorporate the factory fuel line in most applications and you don't have to modify the tank or sending unit with a second line. Plus, the system is self learning and measures pressure and temperature so that once it is installed it's done. No lap top is needed for programming as everything is done through a simple hand-held monitor. As for the wiring, it's almost too simple with only 8 wires you will need to connect. Another cool feature is that the Atomic gives you the ability to control the ignition timing! MSD is an ignition company after all, so it makes sense that we deliver the tools for you to control fuel delivery and timing together in one system!

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Fuel Injection Throttle Body Holley

Part # P311-29FA56F Manu # 112-589 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $826.81

Throttle Body
Throttle Body; LS 90mm w/Tapered Bore; Idle Bleed Adjustment; TPS Clocker And PCV Passage Included; Cable Driven; Black Anodized;
Product Attributes:
- Billet Color: Black
- Throttle Bore: 90mm
- WARNING CA Proposition 65: No
Features:
- Allows TPS To Rotate Back Into Required Idle Voltage Range
- Can Adjust Idle w/o Affecting Throttle Position Or TPS Volts
- PCV Passage Valve Closes To Accommodate Forced Induction Apps
- Tapered Transition Eliminates Low Rpm Drivability Issues
- Billet Body Has High Tolerance Design/Look Your Engine Deserves
- Black Anodized Finish For Corrosion Resistance/Serious Good Looks
- Cruise Control Provision Built In For Cruise Control Cable
- Mounting Hardware And Gasket Included
Holleys BILLET LS Throttle Bodies are the MOST FEATURE LOADED available. Holley went back to the drawing board and built the ultimate air valve for your LS engine! The 112-589 throttle body features a 90 millimeter bore and a low RPM drive friendly taper. Innovative features like Idle Bleed Adjustment, TPS CLOCKER, and closable PCV Passage Valve, make them the ultimate throttle bodies for ease of installation and tuning. Regardless of whether you have a stock LS engine, turbo, supercharger, or a big cam engine sucking gulps of air, Holleys throttle bodies are maximized for your application. The barrier protection of the BLACK ANODIZED finish also offers up a modern tech look!

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Injection Throttle Body Holley

Part # P311-3D0B8D4 Manu # 550-841 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $2,403.60

Sniper EFI Stealth 4500 Throttle Body System
Sniper EFI Stealth 4500 Throttle Body System; 800-1500HP; 8 Injector; Includes O2 and Coolant Temp Sensor/Gaskets/3.5 in. Touch Screen Controller/Harness/Hardware; Shiny Finish;
Product Attributes:
- CFM: 1440
- Flange: 4500
- Injector Size: 100 Lb/hr @ 58.5 Psi
- Throttle Bore: 2.125 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Supports Up To 1500 HP NA Or 1250 HP Forced Induction
- Eight 100 lb../hr. Injectors
- Compatible w/Draw or Blow Through Forced Induction Apps.
- 2.125 Throttle Plate
- Flow 1440 CFM
- Integrated Ignition Timing Control
- Programmable Launch Control Via 2-Step/Timing Retard
- Gen 3 Ultra Dominator Style 4 Bolt Air Cleaner Flange
- -8AN Fuel Inlets
- Full Color Touchscreen for Initial Setup/Tuning/Gauge Displays
- Simple Calibration Wizard - No Laptop Required
- Self-Tuning ECU Means You Dont Have To Be A Computer/Tuning Wiz
- Bosch LSU 4.9 Wideband O2 Sensor Provides Realtime Fuel Map Learn
Introducing the Sniper Stealth 4500 EFI System! Wanting to convert your Dragster or Pro-street vehicle to Fuel Injection? Look no further! The Sniper Stealth 4500 EFI system from Holley features 8, 100LB/HR Fuel Injectors capable of supporting 800 to 1500 HP naturally aspirated, or 800-1250 HP on forced induction applications. The Sniper Stealth 4500 also features multiple Input and Output options for sensor inputs and switched outputs to control external relays. This system also comes with a USB to CAN tuning cable and free downloadable Sniper EFI Software give you unlimited control of your engine

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Injection Throttle Body Holley

Part # P311-35AD39B Manu # 550-443 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $3,597.26

Terminator® Throttle Body
Terminator® Throttle Body; EFI 4bbl Throttle Body w/GM Transmission Control; Includes Tuner; 4150 Style Mounting Flange; For Use w/GM 4L60E/4L80E Transmission; Hardcore Gray;
Product Attributes:
- CFM: 950
- Flange: 4150
- Injector Size: 80 Lb/hr @ 43psi
- Pressure: 43 Psi
- Throttle Bore: 1.750 In.
- WARNING CA Proposition 65: No
Features:
- Fully Self-Tuning Ecu - No Laptop Required
- Trouble-Free w/Fuels An End To Vapor Lock/Fuel Varnish Problems
- Carburetor Looks With The Drivability Of EFI
- Timing Control Option For Gm Small Cap Hei/Ford Tfi Distributors
- Full Color 3.5 Touch Screen LCD For Basic/Advanced Tuning Options
- Optional Free Software Upgrade For Full Laptop Control
- Easy Plug And Play Harnesses With Minimal Connections
- Virtually Maintenance Free Keeps Vehicle Reliable/Ready To Drive
Have you been hesitant on switching to EFI because you like the traditional look of a carburetor? Do you have a GM 4L60E/80E Transmission in your hotrod? There is no more need to worry! Holley has you covered with the new Terminator Stealth Throttle Body Fuel injection System. Now you can have all of the benefits of EFI yet, maintain the traditional looks of a carburetor. Holleys Terminator Stealth EFI systems have the same great self-tuning features of our Terminator EFI in a new stealthy package!- Easy to install - No computer experience required - Handheld tuner included - Simple multiple choice set-up wizard - Self-tunes while you drive - Upgradable to complete laptop control without buying another ECU - Carburetor replacement EFI from the fuel systems experts!- Plug and Play with GM 4L60E and 4L80E Transmissions

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Injection Throttle Body Holley

Part # P311-311AF9C Manu # 112-585 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $812.84

Throttle Body
Throttle Body; LS 95mm w/Tapered Bore; Idle Bleed Adjustment; TPS Clocker And PCV Passage Included; Cable Driven; Black Anodized;
Product Attributes:
- Billet Color: Black
- Throttle Bore: 95mm
- WARNING CA Proposition 65: No
Features:
- CNC Billet Aluminum
- Allows TPS To Rotate Back Into Required Idle Voltage Range
- Can Adjust Idle w/o Affecting Throttle Position Or TPS Volts
- PCV Passage Valve Closes To Accommodate Forced Induction Apps
- Oversized Bore Compared To Others In The 90 To 95Mm Category
- Tapered Transition Eliminates Low Rpm Drivability Issues
- Billet Body Has High Tolerance Design/Look Your Engine Deserves
- Black Anodized Finish For Corrosion Resistance/Serious Good Looks
- Cruise Control Provision Built In For Cruise Control Cable
Holleys BILLET LS Throttle Bodies are the BIGGEST BORE (in the 90 to 95mm category) - MOST FEATURE LOADED available. Holley went back to the drawing board and built the ultimate air valve for your LS engine! This all new design boasts a 95 millimeter bore and a low RPM drive friendly taper. Innovative features like Idle Bleed Adjustment, TPS CLOCKER, and closable PCV Passage Valve, make them the ultimate throttle bodies for ease of installation and tuning. Regardless of whether you have a turbo, supercharger, or a big cam engine sucking gulps of air, Holleys throttle bodies are maximized for your application. The barrier protection of the BLACK ANODIZED finish also offers up a modern tech look!

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Injection Throttle Body Holley

Part # P311-0E9A6AB Manu # 112-581 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $847.40

Throttle Body
Throttle Body; LS 105mm w/Tapered Bore; Idle Bleed Adjustment; TPS Clocker And PCV Passage Included.; Cable Driven; Black Anodized;
Product Attributes:
- Billet Color: Black
- Throttle Bore: 105mm
- WARNING CA Proposition 65: No
Features:
- CNC Billet Aluminum
- Allows TPS To Rotate Back Into Required Idle Voltage Range
- Can Adjust Idle w/o Affecting Throttle Position Or TPS Volts
- PCV Passage Valve Closes To Accommodate Forced Induction Apps
- Oversized Bore Compared To Other Ls Throttle Bodies
- Tapered Transition Eliminates Low Rpm Drivability Issues
- Billet Body Has High Tolerance Design/Look Your Engine Deserves
- Black Anodized Finish For Corrosion Resistance/Serious Good Looks
- Cruise Control Provision Built In For Cruise Control Cable
Holleys BILLET LS Throttle Bodies are the BIGGEST BORE - MOST FEATURE LOADED available. Holley went back to the drawing board and built the ultimate air valve for your LS engine! This all new design boasts a huge 105 millimeter bore for when WOT is all that matters. Innovative features like Idle Bleed Adjustment, TPS CLOCKER, and closable PCV Passage Valve, make them the ultimate throttle bodies for ease of installation and tuning. Regardless of whether you have a turbo, supercharger, or a big cam engine sucking gulps of air, Holleys throttle bodies are maximized for your application. The barrier protection of the BLACK ANODIZED finish also offers up a modern tech look!

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Injection Throttle Body Holley

Part # P311-0B92AF1 Manu # 112-119 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $214.56

Throttle Body Kit
Throttle Body Kit; For Use w/Carburetor PN[0-4781];
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Throttle Body Kit
- For Use w/Carburetor PN[0-4779]
Throttle Body Kit, 0-4781

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 2014 Freightliner Sprinter 2500 Fuel Injection Throttle Body