Finish Selecting Your Vehicle

Choose your Submodel for your 2014 Chrysler 300

  • Base
  • C
  • C Luxury
  • S
  • Touring

Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Flaming River
    Flaming River
  • Ford Racing
    Ford Racing

Showing Products For 2014 Chrysler 300 Rack and Pinion Assembly

Below are all the different brands and applications for 2014 Chrysler 300 Rack and Pinion Assembly

Showing 1 - 10 of 14 Products for Rack and Pinion Assembly.

Refine Your Search

Cardone
2014 Chrysler 300 Rack and Pinion Assembly 8 Cyl 5.7L Cardone - Rack and Pinion Assembly

P311-2B99511    22-3082  Remanufactured

Qty:
In Stock & Ready to Ship
$82.80 $310.40
Cardone Rack and Pinion Assembly
  • with Touring Suspension ( (SDC) ) Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Sales Codes are found on the "Body Code" plate located on the left front side shield, wheel housing, or the upper radiator support of your vehicle with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 18.06
    • Distance Between Mounting Holes (mm): 458.80
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.75
    • Input Shaft Diameter (mm): 18.95
    • Input Shaft Length (in): 2.44
    • Input Shaft Length (mm): 61.93
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 50.25
    • Rack Length (mm): 1276.35
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 57.35
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type Block Engine CID CC
2014 - Chrysler 300 RWD V 8 Cyl 5.7L 345 -
Cardone
2014 Chrysler 300 Rack and Pinion Assembly 8 Cyl 6.4L Cardone - Rack and Pinion Assembly

P311-2B99511    22-3082  Remanufactured

4584568AD , 4584568AF , 4584569AC , 4584569AD , 4584569AE , 4584571AB , 4584571AD , 4584573AB , 4584573AC , 4584573AD , 4584573AE , 4584573AF

Qty:
In Stock & Ready to Ship
$82.80 $310.40
Cardone Rack and Pinion Assembly
  • Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 18.06
    • Distance Between Mounting Holes (mm): 458.80
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: O-ring
    • Input Shaft Diameter (in): 0.75
    • Input Shaft Diameter (mm): 18.95
    • Input Shaft Length (in): 2.44
    • Input Shaft Length (mm): 61.93
    • Package Contents: Rack And Pinion, Sealing Kit, Instruction Sheet
    • Pressure Port Thread Size: M18 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 50.25
    • Rack Length (mm): 1276.35
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 57.35
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2014 - Chrysler 300 V 8 Cyl 6.4L 392 6424
BBB Industries
2014 Chrysler 300 Rack and Pinion Assembly BBB Industries - Reman Rack and Pinion

P311-043F722    102-0252  Remanufactured

04584569AE , 04584569AF , 4584569AF , 4584571AD

Qty:
In Stock & Ready to Ship
$140.00 $345.12
BBB Industries Rack and Pinion Assembly
  • Power Steering
  • Reman Rack and Pinion
  • Product Attributes:
    • Bushings Included: Yes
    • Hydraulic or Electric: Hydraulic
    • Inner Tie Rods Included: Yes
    • Outer Tie Rods Included: No
    • Turns Lock To Lock: 2.625
Brand: BBB Industries
Additional Fitment Information:
Vehicle Submodel Drive Type
2014 - Chrysler 300 Touring RWD
BBB Industries
2014 Chrysler 300 Rack and Pinion Assembly BBB Industries - New Rack and Pinion

P311-047EB5F    N102-0252  New

04584569AE , 04584569AF , 4584569AF , 4584571AD

Qty:
In Stock & Ready to Ship
$587.74
BBB Industries Rack and Pinion Assembly
  • Power Steering
  • New Rack and Pinion
  • Product Attributes:
    • Bushings Included: Yes
    • Check Valve: Yes
    • Hydraulic or Electric: Hydraulic
    • Inner Tie Rod Length: 13.688
    • Inner Tie Rod Thread Size: 2.125
    • Inner Tie Rods Included: Yes
    • Input Shaft Diameter (mm): 14.500
    • Input Shaft Length (mm): 121.300
    • Mounting Hole Quantity: 2
    • Orientation (Center): 2:00 To 3:00
    • Outer Tie Rods Included: No
    • Pressure Port Thread Size: M18x1.50
    • Rack Length (mm): 1282.700
    • Return Port Thread Size: M16x1.50
    • Sensor Included: No
    • Turns Lock To Lock: 2.625
Brand: BBB Industries
Additional Fitment Information:
Vehicle Submodel Drive Type
2014 - Chrysler 300 Touring RWD
Flaming River
Rack and Pinion Assembly Flaming River

P311-59D357B    FR1501  New

Qty:
In Stock & Ready to Ship
$376.01
Flaming River Rack and Pinion Assembly
  • 1971-72 Pinto Manual Rack and Pinion
  • Rack and Pinion: Pinto 1971-1972 Manual
  • Product Attributes:
    • Bar CodePart No.: Fr1501
    • Rack Length: Standard
    • Title: Flaming River Pinto Manual Rack
  • This manual rack and pinion is designed to meet top chassis builders standards for a new drag race steering gear. Manufactured to be sleek, lightweight and durable using high-quality, aluminum castings and chromed plated steel center tube.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle
Flaming River
Rack and Pinion Assembly Flaming River

P311-1B87615    FR1501-2  New

Qty:
In Stock & Ready to Ship
$567.33
Flaming River Rack and Pinion Assembly
  • 1971-72 Pinto 5 Narrowed Rack and Pinion with Bronze Bushing
  • Rack and Pinion: Narrowed Pinto R/P
  • Product Attributes:
    • Bar CodePart No.: Fr1501-2
    • Rack Length: Narrowed 5" With Bronze Bushing
    • Title: Flaming River Narrw Pinto Mnl Rack
  • This manual rack and pinion is designed to meet top chassis builders standards for a new drag race steering gear. Manufactured to be sleek, lightweight and durable using high-quality, aluminum castings and chromed plated steel center tube.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle
Flaming River
Rack and Pinion Assembly Flaming River

P311-565C03A    FR1507-2  New

Qty:
In Stock & Ready to Ship
$451.14
Flaming River Rack and Pinion Assembly
  • 45 Omni Manual Rear Steer Rack and Pinion
  • Rack and Pinion: Omni R/P Manual - 45.0 OAL Rear steer
  • Product Attributes:
    • Bar CodePart No.: Fr1507-2
    • Pinion Style: Standard Pinions
    • Rack Length: 45"
    • Title: Flaming River 45 Omni Rs Rack
  • Designed for use with Musta

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle
Flaming River
Rack and Pinion Assembly Flaming River

P311-3CAE494    FR1507-3  New

Qty:
In Stock & Ready to Ship
$449.81
Flaming River Rack and Pinion Assembly
  • 41.7 Omni Manual Rear Steer Rack and Pinion
  • Rack and Pinion: Omni R/P Manual - 41.7 OAL Rear steer
  • Product Attributes:
    • Bar CodePart No.: Fr1507-3
    • Rack Length: 41.7 In.
    • Title: Flaming River 41.7 Omni Rs Rack
  • Designed for use with Musta

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle
Flaming River
Rack and Pinion Assembly Flaming River

P311-13C778A    FR1507C  New

Qty:
In Stock & Ready to Ship
$126.83
Flaming River Rack and Pinion Assembly
  • Omni Rack Mount Clamp with Bushing
  • Rack and Pinion Access: Omni Mounting Clamp w/Bushing
  • Product Attributes:
    • Bar CodePart No.: Fr1507c
    • Title: Flaming River Omni Rack Mount
  • Designed to be the perfect compliment to our manual rack and pinions.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle
Flaming River
Rack and Pinion Assembly Flaming River

P311-246D7A5    FR1612  New

Qty:
In Stock & Ready to Ship
$166.78
Flaming River Rack and Pinion Assembly
  • Power Rack and Pinion Access: Small Block Bracket Steel
  • Power Rack and Pinion Access: Small Block Bracket Steel
  • Product Attributes:
    • Bar CodePart No.: Fr1612
    • Title: Flaming River Sb Pump Bracket
  • This power steering pump bracket is for Stage II style pumps and features a revolutionary new design ? made of black oxide steel ? and available for small block and big block vehicle applications

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Flaming River
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 14 Products for Rack and Pinion Assembly.