Finish Selecting Your Vehicle

Choose your Submodel for your 2014 BMW X5

  • xDrive35d
  • xDrive35i
  • xDrive50i

Shop By Brand

The Following brands are available based on your search.

  • Autopart International
    Autopart International
  • Cardone
    Cardone
  • Dana Spicer Chassis
    Dana Spicer Chassis
  • Dorman
    Dorman
  • Febi
    Febi
  • Genuine
    Genuine
  • Qa1
    Qa1

Showing Products For 2014 BMW X5 Drive Shaft

Below are all the different brands and applications for 2014 BMW X5 Drive Shaft

Showing 1 - 10 of 25 Products for Drive Shaft.

Refine Your Search

Genuine
2014 BMW X5 Drive Shaft - Front Genuine

P311-2B4301A    W0133-2035121  New

Qty:
In Stock & Ready to Ship
$1,643.09
Genuine Drive Shaft  Front
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Genuine
Position: Front
Additional Fitment Information:
Vehicle Submodel Position
2014 - BMW X5 xDrive35d Front
Cardone
2014 BMW X5 Drive Shaft - Front 8 Cyl 4.4L Cardone - Remanufactured Driveshaft / Prop Shaft

P311-51C45EE    65-7052  New

26208605866

Qty:
In Stock & Ready to Ship
$297.52
Cardone Drive Shaft  Front
  • with 27.87 (in) Long Driveshaft Measurement taken from end of flange face to end of input shaft Supplied as New
  • Remanufactured Driveshaft / Prop Shaft
  • Product Attributes:
    • Compressed Length:
      • 27.87
      • 708.00
    • Contains Electronic Components: No
    • CV Joints Included: No
    • Does it require SDS: No
    • Drive Shaft Type: Universal Joint
    • E-Waste: No
    • End 1 Type: Splined
    • End 2 Type: Bolt On
    • FAA_A1: The Most Common Causes Of Prop Shaft Vibrations Are Worn Joints, An Unbalanced Drive Shaft, Poor Joint Lubrication, And A Bent Or Twisted Shaft.
    • FAA_A2: Each Shaft Is Precisely Balanced Before Boxing. Prop Shaft Balance Is Necessary For Proper Driveline Operation. An Unbalanced Shaft Can Cause Premature Wear On Other Major Components Such As Your Transmission And Rear Differential.
    • FAA_A3: This Procedure Entails The Distribution Of Mass In The Rotating Prop Shaft. The Shaft Is Measured And Altered Where Necessary To Ensure That Vibration Does Not Occur During Operation.
    • FAA_A4: Not All Vehicles Will Have A Prop Shaft. Prop Shafts Are Most Commonly Found On All-wheel-drive And Rear- Wheel-drive Vehicles.
    • FAA_A5: Phasing Is A Used To Describe The Alignment Of The Yokes With Each Other At Both Ends Of The Prop Shaft. The Phase Angle Is The Rotational Position Of Each Yoke On A Prop Shaft.
    • FAA_A6: A Universal Joint Is Designed To Allow Prop Shafts To Move With Suspension Travel While The Shaft Is Moving. This Allows Power To Be Transmitted When The Prop Shaft Is Angled Between The Transmission And Differential.
    • FAQ_Q1: What Causes Prop Shaft Vibration?
    • FAQ_Q2: Are Your Shafts Balanced? Why Is It Necessary?
    • FAQ_Q3: How Is A Prop Shaft Balanced?
    • FAQ_Q4: Do All Vehicles Have Prop Shafts?
    • FAQ_Q5: What Is Prop Shaft Phasing?
    • FAQ_Q6: What Is A Universal Joint?
    • Grade Type: Regular
    • Greasable: No
    • Grease Fitting Included: No
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Phased: Yes
    • Product Condition: New
    • Shaft Material: Steel
    • Slip Yoke: Yes
    • Universal Joints Included: Yes
  • Features:
    • Built to match O.E. form, fit and function.
    • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
    • All slip yokes are lubricated to prevent premature wear.
    • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
  • CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Brand: Cardone
Position: Front
Additional Fitment Information:
Vehicle Fuel Type Position Block Engine CID CC
2014 - BMW X5 GAS Front V 8 Cyl 4.4L 268 4395
Dorman
2014 BMW X5 Drive Shaft - Front Dorman

P311-139C08F    976-352  New

26107589129 , 26207597649 , 26208605866

Qty:
In Stock & Ready to Ship
$301.28
Dorman Drive Shaft  Front
  • Front Driveshaft Assembly
  • Product Attributes:
    • Axle Nut Included:
      • No
      • Non
    • Contenidos del paquete: 1 Eje Propulsor
    • CV Joints Included:
      • No
      • Non
    • Drive Shaft Length (In): 27.875 In
    • Drive Shaft Wall Thickness (In):
      • 0.083 In
      • 0.083 In.
    • Espesor de la pared del eje motriz (in): 0.083 In.
    • Grade Type: Regular
    • Greaseable Drive Shaft:
      • No
      • Non
    • Longitud del eje motriz (in): 27.875 In.
    • Longitud total ajustable: S?¡
    • Overall Length Adjustable:
      • Oui
      • Yes
    • Package Contents: 1 Driveshaft
    • Shaft Diameter: 1.5
    • Shaft Material:
      • Acero
      • Steel
    • Slip Yoke:
      • Oui
      • S?¡
      • Yes
  • Features:
    • Direct replacement - this drive shaft is made to the original equipment dimensions for dependable fit and performance
    • 100% new - this drive shaft is made from all new components so there's no core charge or return hassle
    • Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple
    • Serviceable construction - non-staked universal joints are designed for future serviceability
  • Replacing a drive shaft doesn't have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Brand: Dorman
Position: Front
Additional Fitment Information:
Vehicle Drive Type Position
2014 - BMW X5 AWD Front
Qa1
Drive Shaft Qa1

P311-4764475    JJ-11220  New

Qty:
In Stock & Ready to Ship
$1,045.27
Qa1 Drive Shaft
  • Driveshaft, CF, CT-Dirt Cr-Lm, 37.50" 2.3", 1310 U-Joint, 1500Lb.
  • Carbon fiber driveshaft for circle track applications. With a length of 37.50", a diameter of 2.25" with a 1310 U-joint. Does not include slip yoke.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
  • With a 2.25" diameter, and available in all popular lengths with U-joints and an optional slip yoke, QA1 carbon fiber driveshafts are lighter, stronger and safer than aluminum and steel driveshafts. QA1 specially winds the driveshafts with 3M Matrix Resin that is exclusive to QA1 driveshafts. 3M Matrix Resin uses spherical nanoscale silica that provides improved abrasion resistance and longevity, higher compressive strength and minimal water absorption for increased torque capacity and longevity. This resin is what gives a QA1 driveshaft its distinctive blue tint. The driveshafts have a uniform wall thickness created by optimum fiber lay up that ensures high RPM stability as well as extreme torque capacities. A thoroughly engineered surface protection is used to withstand extreme racing environments and provide a worry-free performance. These driveshafts also feature Spicer Life Series Universal Joints that are high strength alloy and provide durability, high torque capacity and are sealed for maximum strength and no maintenance. The high-misalignment 7075 aluminum tube yokes are precision CNC machined and are specially developed for QA1's 11 step bonding procedure that ensures a better balance. With their incredible strength and durable surface protection, you get worry-free performance season after season. Made in the U.S.A., Made with 3M Matrix Resin, Precision Balanced , Track Tested, Tested During and After Production, Spicer Life Series Universal Joints, High-Misalignment 7075 Aluminum Tube Yokes, Lighter, Stronger and Safer than Steel or Aluminum Driveshafts, Custom Lengths Also Available.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Qa1
Drive Shaft Qa1

P311-51DAF1A    JJ-11221  New

Qty:
In Stock & Ready to Ship
$1,045.27
Qa1 Drive Shaft
  • Driveshaft, CF, CT-Dirt Cr-Lm, 38.00" 2.3", 1310 U-Joint, 1500Lb.
  • Carbon fiber driveshaft for circle track applications. With a length of 38.00", a diameter of 2.25" with a 1310 U-joint. Does not include slip yoke.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
  • With a 2.25" diameter, and available in all popular lengths with U-joints and an optional slip yoke, QA1 carbon fiber driveshafts are lighter, stronger and safer than aluminum and steel driveshafts. QA1 specially winds the driveshafts with 3M Matrix Resin that is exclusive to QA1 driveshafts. 3M Matrix Resin uses spherical nanoscale silica that provides improved abrasion resistance and longevity, higher compressive strength and minimal water absorption for increased torque capacity and longevity. This resin is what gives a QA1 driveshaft its distinctive blue tint. The driveshafts have a uniform wall thickness created by optimum fiber lay up that ensures high RPM stability as well as extreme torque capacities. A thoroughly engineered surface protection is used to withstand extreme racing environments and provide a worry-free performance. These driveshafts also feature Spicer Life Series Universal Joints that are high strength alloy and provide durability, high torque capacity and are sealed for maximum strength and no maintenance. The high-misalignment 7075 aluminum tube yokes are precision CNC machined and are specially developed for QA1's 11 step bonding procedure that ensures a better balance. With their incredible strength and durable surface protection, you get worry-free performance season after season. Made in the U.S.A., Made with 3M Matrix Resin, Precision Balanced , Track Tested, Tested During and After Production, Spicer Life Series Universal Joints, High-Misalignment 7075 Aluminum Tube Yokes, Lighter, Stronger and Safer than Steel or Aluminum Driveshafts, Custom Lengths Also Available.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Qa1
Drive Shaft Qa1

P311-24BB750    JJ-11271  New

Qty:
In Stock & Ready to Ship
$1,339.95
Qa1 Drive Shaft
  • Driveshaft, Cf, Ct-Dirt LM, 35.50'' TT 2.3'', 1310 U-Joint, 2600Lb.
  • Carbon fiber driveshaft for circle track applications. With a length of 35.50'', a diameter of 2.25" with a 1310 U-joint.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
  • Changing track conditions don't have to affect your performance. That's why QA1 offers two carbon fiber driveshaft options for super late models, limited late models, and Wissota and IMCalifornia dirt late models. While both provide unmatched performance on any track, they each have their unique features designed to provide extra benefits in specific conditions. Our 2.25'' driveshaft utilizes TractionTwist technology to get better traction on slick tracks, providing extra alignment to avoid binding. QA1's 2.25" diameter carbon fiber driveshaft is the first of its size ever designed for dirt late models, and it features a specially designed tube structure that makes it ideal for use on slick tracks. The tube utilizes TractionTwist technology, which provides more twist under load to smooth out RPM spikes, resulting in smoother application of power to the rear tires. Data tested and track tested with multiple Crown Jewel victories, these driveshafts have proven to increase and maintain traction better than other driveshafts on slick tracks. The driveshafts have a uniform wall thickness created by optimum fiber lay up that ensures high RPM stability as well as extreme torque capacities. A thoroughly engineered surface protection is used to withstand extreme racing environments and provide a worry-free performance. The forged yokes are precision CNC machined and are specially developed for QA1's 11 step bonding procedure that ensures a better balance and minimal material waste. All QA1 driveshafts are precision balanced, track tested and proven. They are lighter, stiffer, stronger and safer than steel or aluminum driveshafts, and available in a variety of lengths and with or without a slip yoke. Custom lengths are also available. Made in the USA.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Qa1
Drive Shaft Qa1

P311-5CC5341    JJ-11274  New

Qty:
In Stock & Ready to Ship
$1,445.39
Qa1 Drive Shaft
  • Driveshaft, Cf, Ct-Dirt LM, 38.00'' TT 2.3'', 1310 U-Joint, 2600Lb.
  • Carbon fiber driveshaft for circle track applications. With a length of 38.00'', a diameter of 2.25" with a 1310 U-joint.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
  • Changing track conditions don't have to affect your performance. That's why QA1 offers two carbon fiber driveshaft options for super late models, limited late models, and Wissota and IMCalifornia dirt late models. While both provide unmatched performance on any track, they each have their unique features designed to provide extra benefits in specific conditions. Our 2.25'' driveshaft utilizes TractionTwist technology to get better traction on slick tracks, providing extra alignment to avoid binding. QA1's 2.25" diameter carbon fiber driveshaft is the first of its size ever designed for dirt late models, and it features a specially designed tube structure that makes it ideal for use on slick tracks. The tube utilizes TractionTwist technology, which provides more twist under load to smooth out RPM spikes, resulting in smoother application of power to the rear tires. Data tested and track tested with multiple Crown Jewel victories, these driveshafts have proven to increase and maintain traction better than other driveshafts on slick tracks. The driveshafts have a uniform wall thickness created by optimum fiber lay up that ensures high RPM stability as well as extreme torque capacities. A thoroughly engineered surface protection is used to withstand extreme racing environments and provide a worry-free performance. The forged yokes are precision CNC machined and are specially developed for QA1's 11 step bonding procedure that ensures a better balance and minimal material waste. All QA1 driveshafts are precision balanced, track tested and proven. They are lighter, stiffer, stronger and safer than steel or aluminum driveshafts, and available in a variety of lengths and with or without a slip yoke. Custom lengths are also available. Made in the USA.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Qa1
Drive Shaft Qa1

P311-05D2C09    JJ-12201  New

Qty:
In Stock & Ready to Ship
$975.85
Qa1 Drive Shaft
  • Driveshaft, CF, CT-Dirt-Mod, Sy 29.00" 2.3", 1310 U-Joint, 1500Lb., GM 27Sp, 8
  • Carbon fiber driveshaft for circle track applications. With a length of 29.00", a diameter of 2.25" with a 1310 U-joint. Includes an 8" slip yoke.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
  • With a 2.25" diameter, and available in all popular lengths with U-joints and an optional slip yoke, QA1 carbon fiber driveshafts are lighter, stronger and safer than aluminum and steel driveshafts. QA1 specially winds the driveshafts with 3M Matrix Resin that is exclusive to QA1 driveshafts. 3M Matrix Resin uses spherical nanoscale silica that provides improved abrasion resistance and longevity, higher compressive strength and minimal water absorption for increased torque capacity and longevity. This resin is what gives a QA1 driveshaft its distinctive blue tint. The driveshafts have a uniform wall thickness created by optimum fiber lay up that ensures high RPM stability as well as extreme torque capacities. A thoroughly engineered surface protection is used to withstand extreme racing environments and provide a worry-free performance. These driveshafts also feature Spicer Life Series Universal Joints that are high strength alloy and provide durability, high torque capacity and are sealed for maximum strength and no maintenance. The high-misalignment 7075 aluminum tube yokes are precision CNC machined and are specially developed for QA1's 11 step bonding procedure that ensures a better balance. With their incredible strength and durable surface protection, you get worry-free performance season after season. Made in the U.S.A., Made with 3M Matrix Resin, Precision Balanced , Track Tested, Tested During and After Production, Spicer Life Series Universal Joints, High-Misalignment 7075 Aluminum Tube Yokes, Lighter, Stronger and Safer than Steel or Aluminum Driveshafts, Custom Lengths Also Available.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Qa1
Drive Shaft Qa1

P311-38431B5    JJ-12202  New

Qty:
In Stock & Ready to Ship
$975.85
Qa1 Drive Shaft
  • Driveshaft, CF, CT-Dirt-Mod, Sy 29.50" 2.3", 1310 U-Joint, 1500Lb., GM 27Sp, 8
  • Carbon fiber driveshaft for circle track applications. With a length of 29.50", a diameter of 2.25" with a 1310 U-joint. Includes an 8" slip yoke.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
  • With a 2.25" diameter, and available in all popular lengths with U-joints and an optional slip yoke, QA1 carbon fiber driveshafts are lighter, stronger and safer than aluminum and steel driveshafts. QA1 specially winds the driveshafts with 3M Matrix Resin that is exclusive to QA1 driveshafts. 3M Matrix Resin uses spherical nanoscale silica that provides improved abrasion resistance and longevity, higher compressive strength and minimal water absorption for increased torque capacity and longevity. This resin is what gives a QA1 driveshaft its distinctive blue tint. The driveshafts have a uniform wall thickness created by optimum fiber lay up that ensures high RPM stability as well as extreme torque capacities. A thoroughly engineered surface protection is used to withstand extreme racing environments and provide a worry-free performance. These driveshafts also feature Spicer Life Series Universal Joints that are high strength alloy and provide durability, high torque capacity and are sealed for maximum strength and no maintenance. The high-misalignment 7075 aluminum tube yokes are precision CNC machined and are specially developed for QA1's 11 step bonding procedure that ensures a better balance. With their incredible strength and durable surface protection, you get worry-free performance season after season. Made in the U.S.A., Made with 3M Matrix Resin, Precision Balanced , Track Tested, Tested During and After Production, Spicer Life Series Universal Joints, High-Misalignment 7075 Aluminum Tube Yokes, Lighter, Stronger and Safer than Steel or Aluminum Driveshafts, Custom Lengths Also Available.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Qa1
Drive Shaft Qa1

P311-4C34F28    JJ-12207  New

Qty:
In Stock & Ready to Ship
$975.85
Qa1 Drive Shaft
  • Driveshaft, CF, CT-Dirt-Mod, Sy 32.00" 2.3", 1310 U-Joint, 1500Lb., GM 27Sp, 8
  • Carbon fiber driveshaft for circle track applications. With a length of 32.00", a diameter of 2.25" with a 1310 U-joint. Includes an 8" slip yoke.
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
  • With a 2.25" diameter, and available in all popular lengths with U-joints and an optional slip yoke, QA1 carbon fiber driveshafts are lighter, stronger and safer than aluminum and steel driveshafts. QA1 specially winds the driveshafts with 3M Matrix Resin that is exclusive to QA1 driveshafts. 3M Matrix Resin uses spherical nanoscale silica that provides improved abrasion resistance and longevity, higher compressive strength and minimal water absorption for increased torque capacity and longevity. This resin is what gives a QA1 driveshaft its distinctive blue tint. The driveshafts have a uniform wall thickness created by optimum fiber lay up that ensures high RPM stability as well as extreme torque capacities. A thoroughly engineered surface protection is used to withstand extreme racing environments and provide a worry-free performance. These driveshafts also feature Spicer Life Series Universal Joints that are high strength alloy and provide durability, high torque capacity and are sealed for maximum strength and no maintenance. The high-misalignment 7075 aluminum tube yokes are precision CNC machined and are specially developed for QA1's 11 step bonding procedure that ensures a better balance. With their incredible strength and durable surface protection, you get worry-free performance season after season. Made in the U.S.A., Made with 3M Matrix Resin, Precision Balanced , Track Tested, Tested During and After Production, Spicer Life Series Universal Joints, High-Misalignment 7075 Aluminum Tube Yokes, Lighter, Stronger and Safer than Steel or Aluminum Driveshafts, Custom Lengths Also Available.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 25 Products for Drive Shaft.