Finish Selecting Your Vehicle

Choose your Engine for your 2013 Nissan Versa

  • 4 Cyl 1.6L

Shop By Brand

The Following brands are available based on your search.

  • Airtex
    Airtex
  • Aisan
    Aisan
  • Autopart International
    Autopart International
  • CARQUEST
    CARQUEST
  • Delphi
    Delphi
  • Genuine
    Genuine
  • Holley
    Holley
  • US Motor Works
    US Motor Works

Showing Products For 2013 Nissan Versa Fuel Pump Module Assembly

Below are all the different brands and applications for 2013 Nissan Versa Fuel Pump Module Assembly

Showing 1 - 10 of 24 Products for Fuel Pump Module Assembly.

Refine Your Search

Genuine
2013 Nissan Versa Fuel Pump Module Assembly Genuine

P311-3D6DEAB    W0133-2060479  New

Qty:
In Stock & Ready to Ship
$677.94
Genuine Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Includes Fuel Tank Sending Unit
Brand: Genuine
Additional Fitment Information:
Vehicle
2013 - Nissan Versa
Aisan
2013 Nissan Versa Fuel Pump Module Assembly Aisan

P311-2B51357    W0133-2060479  New

Qty:
In Stock & Ready to Ship
$722.36
Aisan Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Includes Fuel Tank Sending Unit
Brand: Aisan
Additional Fitment Information:
Vehicle
2013 - Nissan Versa
Airtex
2013 Nissan Versa Fuel Pump Module Assembly 4 Cyl 1.6L Airtex

P311-3023FA7    E9100M  New

1234748 , 17040-3AN0A , 17040-3AN0C , 17040-3AN0E , 2920861 , A33234 , C0752M , D14113402TG , E9100M , M2528785 , P77040M , SP4094M

Qty:
In Stock & Ready to Ship
$581.75
Airtex Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Product Attributes:
    • Connector Color: White
    • Connector Gender: Male
    • Connector Shape: Rectangle
    • Filter Included: No
    • Flow Rate: 11
    • Fuel Sending Unit Included: Yes
    • Grade Type: Regular
    • Housing Length: 101.0
    • Lock Ring Included: No
    • Minimum Flow Rating: 11
    • Minimum Pressure: 51.0
    • Mounting Hardware Included: No
    • Outlet Fitting Thread Size: 3/8 Inch
    • Pump Type: Electrical
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 5
    • Terminal Type: Blade
    • Top Mount Diameter: 152.0
    • Voltage: 12v
    • Wire Gauge Measurement: 18
    • Wire Quantity: 6
    • Wiring Harness Included: No
    • Wiring Harness Length: 260.0
  • The Airtex Fuel Systems program features unique innovation and solutions by offering premium fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features. Airtex Fuel Pump Modules, Hanger Assemblies, Tank Reservoirs, and Tank Sender Assemblies are built to meet or exceed OEM fit and reliability. Most applications include the necessary accessories such as tank seals, patented high-gradient density strainers and wiring harnesses. Fuel sensor design provides resistance to corrosive fuel blends and additives.
Brand: Airtex
Additional Fitment Information:
Vehicle Engine Designation Block Engine CID CC
2013 - Nissan Versa HR16DE L 4 Cyl 1.6L 98 1598
Autopart International
2013 Nissan Versa Fuel Pump Module Assembly Autopart International

P311-0DC1C1E    W0133-3341876  New

Qty:
In Stock & Ready to Ship
$179.10
Autopart International Fuel Pump Module Assembly
Brand: Autopart International
Additional Fitment Information:
Vehicle
2013 - Nissan Versa
US Motor Works
2013 Nissan Versa Fuel Pump Module Assembly 4 Cyl 1.6L US Motor Works - ELECTRIC FUEL PUMP MODULE

P311-5A496A1    USEP9100M  New

Qty:
In Stock & Ready to Ship
$237.25
US Motor Works Fuel Pump Module Assembly
  • ELECTRIC FUEL PUMP MODULE
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
  • Includes: Tank Seal
Brand: US Motor Works
Additional Fitment Information:
Vehicle Block Engine CID CC
2013 - Nissan Versa L 4 Cyl 1.6L 98 1598
Delphi
2013 Nissan Versa Fuel Pump Module Assembly 4 Cyl 1.6L Delphi

P311-2354264    FG1538  New

17040-3AN0A , 17040-3AN0C , 17040-3AN0E , A33234 , DFG1538 , E9100M , M2528785 , P77040M , SP4094M , SP409M

Qty:
In Stock & Ready to Ship
$419.45
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 26
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 55.0
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 283.0
    • Resistance Ohms Full: 51.0
    • Strainer Included: Yes
    • System Pressure: 51 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 5
    • Terminal Type: Blade
    • Vapor Pressure Sensor: No
    • Voltage: 12.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Block Engine CID CC
2013 - Nissan Versa L 4 Cyl 1.6L 98 1598
Delphi
Fuel Pump Module Assembly Delphi

P311-1AC5F71    FG1483  New

3924710C1 , EFG1483

Qty:
In Stock & Ready to Ship
$255.27
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 46
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 80.0
    • Notes: Used On 2012 F64 Navistar
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 180.0
    • Resistance Ohms Full: 10.0
    • Strainer Included: Yes
    • System Pressure: 54 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Delphi
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-473F3E1    12-131  New

Qty:
In Stock & Ready to Ship
$705.55
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Returnless; Installs In Any Tank From 7.25 in. To 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-3FEFDF7    12-130  New

Qty:
In Stock & Ready to Ship
$851.97
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Install In Any Tank From 6.5 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-1C60504    12-319  New

Qty:
In Stock & Ready to Ship
$451.09
Holley Fuel Pump Module Assembly
  • OEM Style EFI Fuel Tank Modules
  • OEM Style EFI Fuel Tank Modules; 255 LPH; Includes Fuel Level Sending Unit/Hydra Mat/Internal Fuel Pressure Regulator;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • In-Tank High Pressure 255 lph Unit
    • Fuel Pressure Is Internally Regulated To 58 PSI
    • A Pre-calibrated Fuel-level Sending Unit 73-10 Ohm
    • This Module Also Features A HydraMat Filter
    • HydraMart Filter Also Provides Protection From Contaminate
  • This in-tank fuel pump module is a high-pressure unit that flows 255 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 550 horsepower

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 24 Products for Fuel Pump Module Assembly.