Finish Selecting Your Vehicle

Choose your Submodel for your 2013 Kia Forte Koup

  • EX
  • SX

Shop By Brand

The Following brands are available based on your search.

  • AEM Electronics
    AEM Electronics
  • AutoMeter
    AutoMeter
  • Bosch
    Bosch
  • Denso
    Denso
  • Edelbrock
    Edelbrock
  • Encore Automotive
    Encore Automotive
  • Facet
    Facet
  • Holley
    Holley
  • Innovate Motorsports
    Innovate Motorsports
  • MSD
    MSD
  • Mando
    Mando
  • NGK
    NGK
  • NTK
    NTK
  • Spectra
    Spectra
  • Vibrant Performance
    Vibrant Performance
  • Walker Exhaust
    Walker Exhaust
  • Walker Products
    Walker Products

Showing Products For 2013 Kia Forte Koup Oxygen Sensor

Below are all the different brands and applications for 2013 Kia Forte Koup Oxygen Sensor

Showing 1 - 10 of 146 Products for Oxygen Sensor.

Refine Your Search

Mando
2013 Kia Forte Koup Oxygen Sensor - Downstream Mando

P311-5A158E3    W0133-1816622  New

Qty:
In Stock & Ready to Ship
$205.99
Mando Oxygen Sensor  Downstream
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • OE Connector
  • with California Emissions
Brand: Mando
Position: Downstream
Additional Fitment Information:
Vehicle Position
2013 - Kia Forte Koup Downstream
Denso
2013 Kia Forte Koup Oxygen Sensor - Downstream Denso - OE Style

P311-380A9E6    234-4238  New

18043 , 250-24878 , 25199 , 350-34630 , 392102C210 , 392102G200 , 75-4411

Qty:
In Stock & Ready to Ship
$66.27
Denso Oxygen Sensor  Downstream
  • Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 23.43
  • Calif. O.E. Quality Replacement Sensor
  • OE Style
  • Product Attributes:
    • Connector Gender: Male
    • Mounting Type: Threaded
    • Sensor Type: Heated
    • Wire Quantity: 4
    • Wiring Harness Length: 23.43
  • DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Brand: Denso
Position: Downstream
Additional Fitment Information:
Vehicle Transmission Position
2013 - Kia Forte Koup Automatic Downstream
Mando
2013 Kia Forte Koup Oxygen Sensor - Downstream Mando - New Original Equipment

P311-373CDDA    18A1478  New

Qty:
In Stock & Ready to Ship
$66.81
Mando Oxygen Sensor  Downstream
  • New OE Oxygen Sensor, Direct Replacement
  • with Calif Emissions
  • New Original Equipment
  • An Oxygen (O2) Sensor helps calculate/monitor the air & fuel mixture for combustion. Most modern vehicles have more than just one O2 sensor, and should be replaced all together. A faulty O2 sensor can easily cause a check engine light (trouble code), rough/erratic engine idle, poor fuel economy, and even engine start up issues. Mando O2 sensors are OE replacements with factory precision specs. Choose Mando O2 Sensors to re-maximize your Hyundai or Kia’s original engine efficiency and performance – We Are OE!
Brand: Mando
Position: Downstream
Additional Fitment Information:
Vehicle Position
2013 - Kia Forte Koup Downstream
Bosch
2013 Kia Forte Koup Oxygen Sensor - Downstream 4 Cyl 2.0L Bosch - Bosch Validated Oxygen Sensor

P311-3C4FFCA    18043  New

Qty:
In Stock & Ready to Ship
$77.26
  • with California Emission System
  • Bosch Validated Oxygen Sensor
Brand: Bosch
Position: Downstream
Additional Fitment Information:
Vehicle Transmission Position Block Engine CID CC
2013 - Kia Forte Koup Automatic Downstream L 4 Cyl 2.0L 122 1998
Bosch
2013 Kia Forte Koup Oxygen Sensor - Upstream 4 Cyl 2.0L Bosch - Bosch Validated Oxygen Sensor

P311-098CCB3    18089  New

Qty:
In Stock & Ready to Ship
$154.07
  • with California Emission System
  • Bosch Validated Oxygen Sensor
Brand: Bosch
Position: Upstream
Additional Fitment Information:
Vehicle Transmission Position Block Engine CID CC
2013 - Kia Forte Koup Manual Upstream L 4 Cyl 2.0L 122 1998
Bosch
2013 Kia Forte Koup Oxygen Sensor - Upstream 4 Cyl 2.0L Bosch - Bosch Validated Oxygen Sensor

P311-16A2E2B    18104  New

Qty:
In Stock & Ready to Ship
$162.78
  • with California Emission System
  • Bosch Validated Oxygen Sensor
Brand: Bosch
Position: Upstream
Additional Fitment Information:
Vehicle Transmission Position Block Engine CID CC
2013 - Kia Forte Koup Automatic Upstream L 4 Cyl 2.0L 122 1998
Walker Products
2013 Kia Forte Koup Oxygen Sensor - Downstream 4 Cyl 2.0L Walker Products - Walker Aftermarket

P311-0E06DF3    350-34390  New

Qty:
In Stock & Ready to Ship
$56.45
Walker Products Oxygen Sensor  Downstream
  • Walker Products 350-34390 Oxygen Sensor 4-W Direct Fit
  • Calif-ESV B1S2
  • Walker Aftermarket Oxygen Sensors are 100% performance tested. Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet or exceed all original equipment specifications and test requirements.
  • Walker Aftermarket
  • Product Attributes:
    • CA_Prop65_Nickel: Warning: This Product Can Expose You To Chemicals, Including Nickel And Nickel Alloyed Stainless Steel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
    • Connector Gender: Male
    • Connector Shape: Radiused Polygon
    • Mounting Type: Threaded
    • Overall Length: 23.74
    • Sensor Type: Heated
    • Wire Quantity: 4
    • Wiring Harness Length: 20.2
  • Walker Products Engine Management and Oxygen/Air-Fuel sensors have been engineered and developed to be an Original Equipment Manufacturers replacement for many vehicles worldwide. Every part number is manufactured for the specific application, fitment position on the vehicle, and will provide the relevant diagnostic system feedback as required by the ECU.Newer vehicles will store fault codes in the ECU, some will relate to the affected sensor and its associated systems. A failed sensor might make itself known by causing the engine to run poorly, increase fuel consumption, exhaust emissions, or illuminating a (MIL) malfunction indicator light. The sensor, wiring harness, and connector should also be checked for physical damage. This will most likely also cause their operational life to be shortened.We are an Automotive ISO9001/TS 16949 certified company, with un-paralleled customer service, marketing, and shipping. Our electronic and paper catalogs are designed for today’s fast paced marketplace, along with our eye catching packaging. Since 1946, Walker Products has been the number one choice for the engine management sensors and fuel system components needed for your vehicle.
Brand: Walker Products
Position: Downstream
Additional Fitment Information:
Vehicle Transmission Aspiration Fuel Type Engine VIN Fuel Delivery Type Position Block Engine CID CC
2013 - Kia Forte Koup Manual Naturally Aspirated GAS 2 FI Downstream L 4 Cyl 2.0L 122 1998
Walker Products
2013 Kia Forte Koup Oxygen Sensor - Downstream 4 Cyl 2.0L Walker Products - Walker OE

P311-50B8242    250-24878  New

Qty:
In Stock & Ready to Ship
$58.32
Walker Products Oxygen Sensor  Downstream
  • Walker Products 250-24878 Oxygen Sensor 4-W Direct Fit
  • Calif-ESV B1S2
  • Walker Premium Oxygen Sensors are 100% OEM quality. Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet or exceed all original equipment specifications and test requirements.
  • Walker OE
  • Product Attributes:
    • CA_Prop65_Nickel: Warning: This Product Can Expose You To Chemicals, Including Nickel And Nickel Alloyed Stainless Steel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
    • Connector Gender: Male
    • Connector Shape: Radiused Polygon
    • Mounting Type: Threaded
    • Overall Length: 24.72
    • Sensor Type: Heated
    • Wire Quantity: 4
    • Wiring Harness Length: 21.18
  • Walker Products Engine Management and Oxygen/Air-Fuel sensors have been engineered and developed to be an Original Equipment Manufacturers replacement for many vehicles worldwide. Every part number is manufactured for the specific application, fitment position on the vehicle, and will provide the relevant diagnostic system feedback as required by the ECU.Newer vehicles will store fault codes in the ECU, some will relate to the affected sensor and its associated systems. A failed sensor might make itself known by causing the engine to run poorly, increase fuel consumption, exhaust emissions, or illuminating a (MIL) malfunction indicator light. The sensor, wiring harness, and connector should also be checked for physical damage. This will most likely also cause their operational life to be shortened.We are an Automotive ISO9001/TS 16949 certified company, with un-paralleled customer service, marketing, and shipping. Our electronic and paper catalogs are designed for today’s fast paced marketplace, along with our eye catching packaging. Since 1946, Walker Products has been the number one choice for the engine management sensors and fuel system components needed for your vehicle.
Brand: Walker Products
Position: Downstream
Additional Fitment Information:
Vehicle Transmission Aspiration Fuel Type Engine VIN Fuel Delivery Type Position Block Engine CID CC
2013 - Kia Forte Koup Automatic Naturally Aspirated GAS 2 FI Downstream L 4 Cyl 2.0L 122 1998
Walker Products
2013 Kia Forte Koup Oxygen Sensor - Downstream 4 Cyl 2.4L Walker Products - Walker OE

P311-55A99B1    250-24864  New

Qty:
In Stock & Ready to Ship
$67.81
Walker Products Oxygen Sensor  Downstream
  • Walker Products 250-24864 Oxygen Sensor 4-W Direct Fit
  • B1S2
  • Walker Premium Oxygen Sensors are 100% OEM quality. Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet or exceed all original equipment specifications and test requirements.
  • Walker OE
  • Product Attributes:
    • CA_Prop65_Nickel: Warning: This Product Can Expose You To Chemicals, Including Nickel And Nickel Alloyed Stainless Steel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
    • Connector Gender: Male
    • Connector Shape: Radiused Polygon
    • Mounting Type: Threaded
    • Overall Length: 23.74
    • Sensor Type: Heated
    • Wire Quantity: 4
    • Wiring Harness Length: 20.2
  • Walker Products Engine Management and Oxygen/Air-Fuel sensors have been engineered and developed to be an Original Equipment Manufacturers replacement for many vehicles worldwide. Every part number is manufactured for the specific application, fitment position on the vehicle, and will provide the relevant diagnostic system feedback as required by the ECU.Newer vehicles will store fault codes in the ECU, some will relate to the affected sensor and its associated systems. A failed sensor might make itself known by causing the engine to run poorly, increase fuel consumption, exhaust emissions, or illuminating a (MIL) malfunction indicator light. The sensor, wiring harness, and connector should also be checked for physical damage. This will most likely also cause their operational life to be shortened.We are an Automotive ISO9001/TS 16949 certified company, with un-paralleled customer service, marketing, and shipping. Our electronic and paper catalogs are designed for today’s fast paced marketplace, along with our eye catching packaging. Since 1946, Walker Products has been the number one choice for the engine management sensors and fuel system components needed for your vehicle.
Brand: Walker Products
Position: Downstream
Additional Fitment Information:
Vehicle Transmission Aspiration Fuel Type Engine VIN Fuel Delivery Type Position Block Engine CID CC
2013 - Kia Forte Koup Manual Naturally Aspirated GAS 3 FI Downstream L 4 Cyl 2.4L - 2359
Walker Products
2013 Kia Forte Koup Oxygen Sensor - Downstream 4 Cyl 2.4L Walker Products - Walker Aftermarket

P311-0E06DF3    350-34390  New

Qty:
In Stock & Ready to Ship
$56.45
Walker Products Oxygen Sensor  Downstream
  • Walker Products 350-34390 Oxygen Sensor 4-W Direct Fit
  • B1S2
  • Walker Aftermarket Oxygen Sensors are 100% performance tested. Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet or exceed all original equipment specifications and test requirements.
  • Walker Aftermarket
  • Product Attributes:
    • CA_Prop65_Nickel: Warning: This Product Can Expose You To Chemicals, Including Nickel And Nickel Alloyed Stainless Steel, Which Are Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
    • Connector Gender: Male
    • Connector Shape: Radiused Polygon
    • Mounting Type: Threaded
    • Overall Length: 23.74
    • Sensor Type: Heated
    • Wire Quantity: 4
    • Wiring Harness Length: 20.2
  • Walker Products Engine Management and Oxygen/Air-Fuel sensors have been engineered and developed to be an Original Equipment Manufacturers replacement for many vehicles worldwide. Every part number is manufactured for the specific application, fitment position on the vehicle, and will provide the relevant diagnostic system feedback as required by the ECU.Newer vehicles will store fault codes in the ECU, some will relate to the affected sensor and its associated systems. A failed sensor might make itself known by causing the engine to run poorly, increase fuel consumption, exhaust emissions, or illuminating a (MIL) malfunction indicator light. The sensor, wiring harness, and connector should also be checked for physical damage. This will most likely also cause their operational life to be shortened.We are an Automotive ISO9001/TS 16949 certified company, with un-paralleled customer service, marketing, and shipping. Our electronic and paper catalogs are designed for today’s fast paced marketplace, along with our eye catching packaging. Since 1946, Walker Products has been the number one choice for the engine management sensors and fuel system components needed for your vehicle.
Brand: Walker Products
Position: Downstream
Additional Fitment Information:
Vehicle Transmission Aspiration Fuel Type Engine VIN Fuel Delivery Type Position Block Engine CID CC
2013 - Kia Forte Koup Manual Naturally Aspirated GAS 3 FI Downstream L 4 Cyl 2.4L - 2359

Showing 1 - 10 of 146 Products for Oxygen Sensor.