Finish Selecting Your Vehicle

Choose your Submodel for your 2013 Jeep Grand Cherokee

  • Laredo
  • Laredo E
  • Laredo X
  • Limited
  • Overland

Shop By Brand

The Following brands are available based on your search.

  • Atlantic Automotive Eng.
    Atlantic Automotive Eng.
  • Autopart International
    Autopart International
  • BBB Industries
    BBB Industries
  • Borgeson
    Borgeson
  • Cardone
    Cardone
  • Mapco
    Mapco
  • Tuff Stuff Performance Accessories
    Tuff Stuff Performance Accessories

Showing Products For 2013 Jeep Grand Cherokee Power Steering Pump

Below are all the different brands and applications for 2013 Jeep Grand Cherokee Power Steering Pump

Showing 1 - 10 of 31 Products for Power Steering Pump.

Refine Your Search

Atlantic Automotive Eng.
2013 Jeep Grand Cherokee Power Steering Pump Atlantic Automotive Eng.

P311-2D73293    W0133-2834172  New

Qty:
In Stock & Ready to Ship
$102.00 $1,266.92
Atlantic Automotive Eng. Power Steering Pump
  • Reman Electric
Brand: Atlantic Automotive Eng.
Additional Fitment Information:
Vehicle Submodel
2013 - Jeep Grand Cherokee Laredo E
Mapco
2013 Jeep Grand Cherokee Power Steering Pump - Front 8 Cyl 5.7L Mapco

P311-32A43A2    96818M  Remanufactured

21-4068 , 68068641AB

Qty:
In Stock & Ready to Ship
$100.00 $116.06
  • Power Steering Pump
Brand: Mapco
Position: Front
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2013 - Jeep Grand Cherokee Front V 8 Cyl 5.7L 345 -
Autopart International
2013 Jeep Grand Cherokee Power Steering Pump 8 Cyl 5.7L Autopart International

P311-3959B30    W0133-4096564  New

Qty:
In Stock & Ready to Ship
$20.00 $207.01
Autopart International Power Steering Pump
Brand: Autopart International
Additional Fitment Information:
Vehicle Block Engine CID CC
2013 - Jeep Grand Cherokee V 8 Cyl 5.7L 345 -
BBB Industries
2013 Jeep Grand Cherokee Power Steering Pump 6 Cyl 3.6L BBB Industries - Reman Power Steering Pump

P311-4DDE29E    980-0104E  Remanufactured

52124998AD , 52124998AF , 52124998AH , 52124998AI

Qty:
In Stock & Ready to Ship
$170.00 $323.71
BBB Industries Power Steering Pump
  • with Reservoir After install check vehicle for DTC's
  • Reman Power Steering Pump
  • Product Attributes:
    • Filter Included: No
    • Hydraulic or Electric: Electric
    • Inlet Attachment Type: Hose
    • Inlet Thread Size: 11mm
    • Installation Kit Included: Yes
    • Outer Tie Rods Included: No
    • Outlet Attachment Type: O-ring
    • Outlet Thread Size: 6mm
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Cap Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
2013 - Jeep Grand Cherokee V 6 Cyl 3.6L 220 3604
BBB Industries
2013 Jeep Grand Cherokee Power Steering Pump 8 Cyl 5.7L BBB Industries - Reman Power Steering Pump

P311-0C942F7    920-0152  Remanufactured

19326708 , 68068641AB

Qty:
In Stock & Ready to Ship
$32.00 $106.92
BBB Industries Power Steering Pump
  • w/o Reservoir
  • Reman Power Steering Pump
  • Product Attributes:
    • Filter Included: No
    • Inlet Attachment Type: Pipe
    • Inlet Thread Size: M8x1.25
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Cap Included: No
    • Reservoir Included: No
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
2013 - Jeep Grand Cherokee V 8 Cyl 5.7L 345 -
Cardone
2013 Jeep Grand Cherokee Power Steering Pump 8 Cyl 5.7L Cardone - Power Steering Pump

P311-3792F8D    21-4068  Remanufactured

68068641AA , 68068641AB

Qty:
In Stock & Ready to Ship
$65.70 $106.76
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Aluminum
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2013 - Jeep Grand Cherokee V 8 Cyl 5.7L 345 -
Cardone
2013 Jeep Grand Cherokee Power Steering Pump 6 Cyl 3.6L Cardone - Power Steering Pump

P311-3A6208A    1H-30003  Remanufactured

52124998AB , 52124998AC , 52124998AD , 52124998AE , 52124998AF , 52124998AG , 52124998AH , 52124998AI , 52124998AJ

Qty:
In Stock & Ready to Ship
$118.80 $379.39
Cardone Power Steering Pump
  • Reservoir Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Electronic Hydraulic Pump
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Armature, Reservoir, Etc.) Are Tested To Match O.e. Performance Standards.
      • During The Engineering Phase, Every Unit Is Tested To Ensure Perfect Fit And Function On The Vehicle.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts And Surfaces Are Machined To Precise Specifications To Eliminate Premature Wear And Extend Product Life.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • To Ensure Reliable Performance, Final Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Steering Effort, Current And Noise.
    • Hose Port Type: O-ring
    • Housing Material: Aluminum; Plastic
    • Mounting Hardware Included: No
    • Package Contents: Electronic Hydraulic Power Steering Pump; Sealing Kit
    • Power Steering Outlet ID Size: 0.43
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Bolt-on
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: Yes
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2013 - Jeep Grand Cherokee V 6 Cyl 3.6L 220 3604
Cardone
2013 Jeep Grand Cherokee Power Steering Pump 8 Cyl 5.7L Cardone - Power Steering Pump

P311-31301DA    96-4068  New

68068641AB

Qty:
In Stock & Ready to Ship
$175.39
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Seal Kit
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • Manufactured With Premium Grade, High-temperature Seals For Added Durability Under All Driving Conditions.
      • Meets Or Exceeds O.e. Performance.
      • Precise Bushing Alignment Prevents Premature Shaft And Seal Wear, Significantly Reducing Noise And Vibration.
      • Rigorous Computer Load Testing Ensures Optimal Performance And Durability By Incorporating Real-world Parameters During The Test Cycle.
    • Hose Port Type: O-ring
    • Housing Material: Aluminum
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: New
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2013 - Jeep Grand Cherokee V 8 Cyl 5.7L 345 -
Cardone
2013 Jeep Grand Cherokee Power Steering Pump 8 Cyl 5.7L Cardone - w/o Reservoir

P311-2CC7D65    W0133-2224743  Remanufactured

Qty:
In Stock & Ready to Ship
$40.00 $211.93
Cardone Power Steering Pump
  • Remanufactured
  • w/o Reservoir
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2013 - Jeep Grand Cherokee V 8 Cyl 5.7L 345 -
Mapco
Power Steering Pump Mapco

P311-3F7F6AE    97240M  New

Qty:
In Stock & Ready to Ship
$150.00 $136.09
  • Power Steering Pump

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mapco
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 31 Products for Power Steering Pump.