Finish Selecting Your Vehicle

Choose your Submodel for your 2013 Chevrolet Camaro

Shop By Brand

The Following brands are available based on your search.

Showing Products For 2013 Chevrolet Camaro Clutch Flywheel

Below are all the different brands and applications for 2013 Chevrolet Camaro Clutch Flywheel

Showing 1 - 10 of 27 Products for Clutch Flywheel.

Rows Per Page

Sort By

2013 Chevrolet Camaro Clutch Flywheel Genuine

Part # P311-4C79DCD Manu # W0133-1945075 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $660.57

Genuine Clutch Flywheel

Genuine Clutch Flywheel

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Brand: Genuine

Vehicle	Submodel
2013 - Chevrolet Camaro	LT

2013 Chevrolet Camaro Clutch Flywheel 8 Cyl 6.2L LuK

Part # P311-0502792 Manu # LFW191 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 167191 , 4160215100 , 88191

Qty:

In Stock & Ready to Ship

Best Price: $140.68

Luk OE Quality Flywheel
Product Attributes:
- Flywheel Diameter: 0
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new - never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

Brand: LuK

Vehicle	Submodel	Block	Engine	CID	CC
2013 - Chevrolet Camaro	SS	V	8 Cyl 6.2L	376	6162

2013 Chevrolet Camaro Clutch Flywheel 8 Cyl 6.2L Centerforce - Iron Flywheel

Part # P311-14C2EB3 Manu # 400142 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $199.95

Centerforce(R) Flywheels; Iron
168 Teeth; Weight 25 lbs.; 14 Bolt Pattern; 14.096 in. O. D.; 2.068 in. Flywheel Flange; 0.815 in. Flywheel Height; Nodular Iron
Centerforce nodular iron flywheels are high quality O.E. nodular iron replacements and are not SFI-certified for competition use.
Iron Flywheel
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- High Quality Nodular Iron Castings
- Built As Oe Replacements
Centerforce nodular iron flywheels are high quality O.E. nodular iron replacements and are not SFI-certified for competition use.

Brand: Centerforce

Vehicle	Submodel	Block	Engine	CID	CC
2013 - Chevrolet Camaro	SS	V	8 Cyl 6.2L	376	6162

2013 Chevrolet Camaro Clutch Flywheel 8 Cyl 6.2L Centerforce - Billet Steel Flywheel

Part # P311-3BAA278 Manu # 700142 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $384.95

Centerforce(R) Flywheels; Steel
168 Teeth; Weight 23.5 lbs.; 14 Bolt Pattern; 14.096 in. Outside Diameter; w/o Counter Balance
Centerforce(R) SFI-certified steel flywheels are CNC-machined from billet steel for precise; no-hassle; bolt-in installation.
Billet Steel Flywheel
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
Features:
- High Quality Billet Steel
- Cad/cam Designed And Cnc Machined
- Precision Balanced
- No-hassle Bolt-in
- Domestic And Import Applications
Centerforce(R) steel flywheels are manufactured from high quality billet steel and match closely to the original equipment flywheel weight. Billet steel flywheels are available for popular import and domestic vehicles, including trucks. Centerforce steel flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation. Centerforce billet steel flywheels are SFI-certified, so you know that you can count on them, on the street and on the track.

Brand: Centerforce

Vehicle	Submodel	Block	Engine	CID	CC
2013 - Chevrolet Camaro	SS	V	8 Cyl 6.2L	376	6162

2013 Chevrolet Camaro Clutch Flywheel LuK

Part # P311-3883D3D Manu # W0133-2188193 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $240.35

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.

Brand: LuK

Vehicle	Submodel
2013 - Chevrolet Camaro	SS

2013 Chevrolet Camaro Clutch Flywheel 8 Cyl 6.2L Exedy - Lightweight Racing Flywheel

Part # P311-5E7C7A2 Manu # GF502A Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $771.46

8 Bolt; One Piece Billet Chromoly Steel; 18.0 lb
Lightweight Racing Flywheel; 8 Bolt; One Piece Billet Chromoly Steel; 18.0 lb;
Lightweight Racing Flywheel
Features:
- Low Weight/Inertia And High Thermal Capacity
- Made From Solid One Piece Billet Chromalloy Steel
- Reduces Weight For Better Engine Response
- Enhances Airflow Which Improves Cooling Of Clutch
- Ring Gear Teeth Integrated Onto Flywheel
- Passed Engineering Tests To 15000-18000 RPM
- Guaranteed Not To Fail To The Said RPM
- SFI Certified
EXEDY Lightweight Flywheels combine low weight, low inertia and high thermal capacity. They are designed for light to moderately tuned racing cars for drag racing, autocross and rally events, as well as street usage. They are made from solid one-piece billet chromoly steel or chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the airflow which improves the cooling of the clutch. The ring gear teeth are integrated onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and has the possibility of separating from the flywheel due to the different expansion coefficients of aluminum and steel. Newly available are lightweight, solid replacements for vehicles fitted with OE dual mass flywheels. EXEDY lightweight flywheels have passed engineering tests to 15,000-18,000 RPM. They are guaranteed not to fail to the said RPM, and are all SFI approved.

Brand: Exedy

Vehicle	Submodel	Engine Designation	Aspiration	Engine VIN	Block	Engine	CID	CC
2013 - Chevrolet Camaro	SS	LS3	Naturally Aspirated	W	V	8 Cyl 6.2L	376	6162

2013 Chevrolet Camaro Clutch Flywheel 8 Cyl 6.2L Exedy - Lightweight Racing Flywheel

Part # P311-5E7C7A2 Manu # GF502A Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $771.46

8 Bolt; One Piece Billet Chromoly Steel; 18.0 lb
Lightweight Racing Flywheel; 8 Bolt; One Piece Billet Chromoly Steel; 18.0 lb;
Lightweight Racing Flywheel
Features:
- Low Weight/Inertia And High Thermal Capacity
- Made From Solid One Piece Billet Chromalloy Steel
- Reduces Weight For Better Engine Response
- Enhances Airflow Which Improves Cooling Of Clutch
- Ring Gear Teeth Integrated Onto Flywheel
- Passed Engineering Tests To 15000-18000 RPM
- Guaranteed Not To Fail To The Said RPM
- SFI Certified
EXEDY Lightweight Flywheels combine low weight, low inertia and high thermal capacity. They are designed for light to moderately tuned racing cars for drag racing, autocross and rally events, as well as street usage. They are made from solid one-piece billet chromoly steel or chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the airflow which improves the cooling of the clutch. The ring gear teeth are integrated onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and has the possibility of separating from the flywheel due to the different expansion coefficients of aluminum and steel. Newly available are lightweight, solid replacements for vehicles fitted with OE dual mass flywheels. EXEDY lightweight flywheels have passed engineering tests to 15,000-18,000 RPM. They are guaranteed not to fail to the said RPM, and are all SFI approved.

Brand: Exedy

Vehicle	Submodel	Engine Designation	Aspiration	Engine VIN	Block	Engine	CID	CC
2013 - Chevrolet Camaro	SS	LS3	Naturally Aspirated	W	V	8 Cyl 6.2L	376	6162

Clutch Flywheel PRW

Part # P311-5537091 Manu # 1630281 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $316.63

Flywheel
Flywheel; Billet Steel; SFI-Spec 1.1; 32 Lbs.; 164 Teeth; Large; 28 in-Oz Removable Counterweight; Fits 63-79 Ford 289-302-351 CID;
Product Attributes:
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
Features:
- SFI Certified
- Manufactured From 1045 Billet Steel
- CAD Engineered And CNC Machined
- Award Winning Designs Year After Year
PRW SFI-Rated flywheels raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. We know that when you receive your new PRW performance components, you will have no trouble seeing what the excitement is all about. These SFI-Rated Flywheels are engineered to handle extreme duty applications and designed to take the punishment of today's high horsepower engines. PRW billet steel flywheels are CAD engineered and precision CNC machined to strict tolerances. The choice of 5 out of 6 winning engine builders at the Engine Master Challenge four years running, PRW billet steel flywheels were awarded Best New Product of the Year at the 2006 Hotrod & Restoration Show. Every flywheel is engineered for excellence and rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW products.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: PRW

Vehicle

Clutch Flywheel PRW

Part # P311-2CF80A0 Manu # 1645570 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $324.80

Flywheel
Flywheel; Billet Steel; SFI-Spec 1.1; External Balance; 33 Lbs.; 166 Teeth; Removable Weight; 2.75 in. Or 2.50 in. Choke Ring; Fits 64-85 Pontiac 326-455 CID;
Product Attributes:
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
Features:
- SFI Certified
- Manufactured From 1045 Billet Steel
- CAD Engineered And CNC Machined
- Award Winning Designs Year After Year
PRW SFI-Rated flywheels raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. We know that when you receive your new PRW performance components, you will have no trouble seeing what the excitement is all about. These SFI-Rated Flywheels are engineered to handle extreme duty applications and designed to take the punishment of today's high horsepower engines. PRW billet steel flywheels are CAD engineered and precision CNC machined to strict tolerances. The choice of 5 out of 6 winning engine builders at the Engine Master Challenge four years running, PRW billet steel flywheels were awarded Best New Product of the Year at the 2006 Hotrod & Restoration Show. Every flywheel is engineered for excellence and rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW products.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: PRW

Vehicle

Clutch Flywheel PRW

Part # P311-4C36AAD Manu # 1628300 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $256.28

Flywheel
Flywheel; Billet Steel; SFI-Spec 1.1; Neutral Balance; Lightweight 21.4 Lbs.; 168 Teeth; Fits Small Block Chevy Gen I;
Product Attributes:
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
Features:
- SFI Certified
- Manufactured From 1045 Billet Steel
- CAD Engineered And CNC Machined
- Award Winning Designs Year After Year
PRW SFI-Rated flywheels raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. We know that when you receive your new PRW performance components, you will have no trouble seeing what the excitement is all about. These SFI-Rated Flywheels are engineered to handle extreme duty applications and designed to take the punishment of today's high horsepower engines. PRW billet steel flywheels are CAD engineered and precision CNC machined to strict tolerances. The choice of 5 out of 6 winning engine builders at the Engine Master Challenge four years running, PRW billet steel flywheels were awarded Best New Product of the Year at the 2006 Hotrod & Restoration Show. Every flywheel is engineered for excellence and rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW products.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: PRW

Vehicle

Showing 1 - 10 of 27 Products for Clutch Flywheel.

Rows Per Page

Sort By