Finish Selecting Your Vehicle

Choose your Engine for your 2012 Volkswagen Jetta

  • 4 Cyl 2.0L
  • 5 Cyl 2.5L

Shop By Brand

The Following brands are available based on your search.

  • APA/URO Parts
    APA/URO Parts
  • Beck Arnley
    Beck Arnley
  • Cardone
    Cardone
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • MSD
    MSD
  • Standard Ignition
    Standard Ignition
  • URO Parts
    URO Parts
  • VDO
    VDO

Showing Products For 2012 Volkswagen Jetta Fuel Injection Throttle Body

Below are all the different brands and applications for 2012 Volkswagen Jetta Fuel Injection Throttle Body

Showing 1 - 10 of 41 Products for Fuel Injection Throttle Body.

Refine Your Search

APA/URO Parts
2012 Volkswagen Jetta Fuel Injection Throttle Body APA/URO Parts

P311-14E7962    W0133-1914393  New

Qty:
In Stock & Ready to Ship
$327.00
APA/URO Parts Fuel Injection Throttle Body
  • Includes Electronic Throttle Body Actuator
Brand: APA/URO Parts
Additional Fitment Information:
Vehicle Aspiration Cylinder Head Type
2012 - Volkswagen Jetta Naturally Aspirated DOHC
VDO
2012 Volkswagen Jetta Fuel Injection Throttle Body VDO

P311-461E7BA    W0133-2893102  New

Qty:
In Stock & Ready to Ship
$660.74
VDO Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Includes Electronic Throttle Body Actuator
Brand: VDO
Additional Fitment Information:
Vehicle Cylinder Head Type
2012 - Volkswagen Jetta SOHC
Cardone
2012 Volkswagen Jetta Fuel Injection Throttle Body 4 Cyl 2.0L Cardone - Fuel Injection Throttle Body

P311-2EC6F29    67-4016  Remanufactured

06G133062J

Qty:
In Stock & Ready to Ship
$22.50 $86.55
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray/unfinished
    • Housing Material: Aluminum
    • Idle Air Control Motor Included: No
    • Package Contents: Electronic Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Engine Designation Fuel Type Block Engine CID CC
2012 - Volkswagen Jetta CBPA GAS L 4 Cyl 2.0L 121 1984
VDO
2012 Volkswagen Jetta Fuel Injection Throttle Body VDO

P311-3514A71    W0133-3780406  New

Qty:
In Stock & Ready to Ship
$477.35
VDO Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: VDO
Additional Fitment Information:
Vehicle Aspiration Fuel Type
2012 - Volkswagen Jetta Turbocharged GAS
Beck Arnley
2012 Volkswagen Jetta Fuel Injection Throttle Body 4 Cyl 2.0L Beck Arnley

P311-0899FAB    154-0161  New

Qty:
In Stock & Ready to Ship
$306.01
Beck Arnley Fuel Injection Throttle Body
  • THROTTLE BODY
  • APPLICATION SPECIFIC FOR THIS VEHICLE
  • Product Attributes:
    • Prop 65 Warning Cancer and Reproductive Harm: Warning:this Product Can Expose You To Chemicals Including 1.3 Butadiene, Which Is Known To The State Of California To Cause Cancer And Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov.
  • Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Brand: Beck Arnley
Additional Fitment Information:
Vehicle Block Engine CID CC
2012 - Volkswagen Jetta L 4 Cyl 2.0L 121 1984
URO Parts
2012 Volkswagen Jetta Fuel Injection Throttle Body URO Parts

P311-4B77967    07K133062A  New

07K 133 062A , 07K133062A , 67-4007 , 674007 , TB1303 , URO-014758

Qty:
In Stock & Ready to Ship
$180.19
URO Parts Fuel Injection Throttle Body
  • Throttle Body Assembly
  • Package Includes Electronic Throttle Body Actuator
    • Guaranteed Fitment
    • Engineered to match manufacturers’ performance specifications.
    • Accurately controls airflow into the engine.
    • High-quality replacement for a broken or malfunctioning Throttle Body.
    • Helps maintain proper engine air to fuel ratio for optimal gas mileage.
    • 24 Month Unlimited Mileage Warranty
Brand: URO Parts
Additional Fitment Information:
Vehicle Aspiration Cylinder Head Type
2012 - Volkswagen Jetta Naturally Aspirated DOHC
Cardone
2012 Volkswagen Jetta Fuel Injection Throttle Body 4 Cyl 2.0L Cardone - Fuel Injection Throttle Body

P311-2928632    67-4003  Remanufactured

06F133062E , 06F133062G , 06F133062J , 06F133062Q , 06F133062T

Qty:
In Stock & Ready to Ship
$22.50 $208.89
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray/unfinished
    • Housing Material: Aluminum
    • Idle Air Control Motor Included: No
    • Package Contents: Electronic Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Engine Designation Block Engine CID CC
2012 - Volkswagen Jetta CBFA L 4 Cyl 2.0L 121 1984
Cardone
2012 Volkswagen Jetta Fuel Injection Throttle Body 5 Cyl 2.5L Cardone - Fuel Injection Throttle Body

P311-0D9CF16    67-4007  Remanufactured

07K133062A

Qty:
In Stock & Ready to Ship
$19.80 $268.50
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray/unfinished
    • Housing Material: Aluminum
    • Idle Air Control Motor Included: No
    • Package Contents: Electronic Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2012 - Volkswagen Jetta L 5 Cyl 2.5L 151 2480
Standard Ignition
2012 Volkswagen Jetta Fuel Injection Throttle Body 4 Cyl 2.0L Standard Ignition

P311-187EDCA    S20070  New

007623401 , 06F 133 062 E , 06F 133 062 G , 06F 133 062 J , 06F 133 062 Q , 06F133062AG , 06F133062E , 67-4003 , A2C59511705 , ETB700 , ETBC20015 , NTB1029 , TB1024 , TB1024D , V10-81-0036

Qty:
In Stock & Ready to Ship
$262.48
Standard Ignition Fuel Injection Throttle Body
  • Fuel Injection Throttle Body
  • Product Attributes:
    • Connector Gender: Female
    • Contents: 1 Throttle Body
    • Terminal Gender: Male
    • Terminal Quantity: 6
    • Terminal Type: Blade
  • 100% NEW, never remanufactured, which maximizes performance and extends service life. Undergoes extensive testing to ensure quality and reliability out of the box. Matches OE response time for peak performance on drive by wire systems. All TechSmart® parts meet or exceed OE performance, providing today's technician with the quality parts needed to get the job done right, the first time.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
2012 - Volkswagen Jetta GAS L 4 Cyl 2.0L 121 1984
MSD
Fuel Injection Throttle Body MSD

P311-19FC7EE    2910  New

Qty:
In Stock & Ready to Ship
$1,835.31
MSD Fuel Injection Throttle Body
  • Atomic EFI Basic Kit Throttle Body
  • Atomic EFI Basic Kit Throttle Body; Carburetor Replacement Upgrade To EFI TBI [Basic Kit]; Includes Throttle Body/Power Module/Wide Band O2 Sensor/Harnesses/Handheld Programmer;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Carb Approved
    • 8 Connections
    • Single Fuel Line
    • Self Tuning
    • No Laptop
    • Fuel Pump And Regulator Not Included
  • The Atomic system is based on an easy-to-install throttle body design that will provide modern drive ability benefits to street rods and muscle cars – anything with a carburetor. Note the sanitary and traditional look of the unit. It's meant to replace a standard square bore carburetor and can be installed by the average car guy and a friend in a home garage with simple tools within a weekend. In fact, with a little preparation, you should be able to start Saturday morning and make the cruise that night! We wanted to make EFI easy which means less wiring, self learning technology and a return less fuel system. This means you can incorporate the factory fuel line in most applications and you don't have to modify the tank or sending unit with a second line. Plus, the system is self learning and measures pressure and temperature so that once it is installed it's done. No lap top is needed for programming as everything is done through a simple hand-held monitor. As for the wiring, it's almost too simple with only 8 wires you will need to connect. Another cool feature is that the Atomic gives you the ability to control the ignition timing! MSD is an ignition company after all, so it makes sense that we deliver the tools for you to control fuel delivery and timing together in one system!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 41 Products for Fuel Injection Throttle Body.