2012 Ford Fiesta Engine Cylinder Head Gasket Mahle
P311-4074169W0133-2011046New
Qty:
In Stock & Ready to Ship
$41.18
Brand: Mahle
Additional Fitment Information:
Vehicle
2012 - Ford Fiesta
2012 Ford Fiesta Engine Cylinder Head Gasket Genuine
P311-4EB5C1AW0133-2011046New
Qty:
In Stock & Ready to Ship
$38.64
This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Genuine
Additional Fitment Information:
Vehicle
2012 - Ford Fiesta
Engine Cylinder Head Gasket Cometic Gasket
P311-229830CC5639-051New
Qty:
In Stock & Ready to Ship
$114.71
GM/Mercury Marine Gen-IV Cylinder Head Gasket
GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.530in. Bore
Product Attributes:
Engine Make/Size:Gm/mercury Marine Gen Iv Big Block
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-266EF3AC5640-051New
Qty:
In Stock & Ready to Ship
$114.71
GM/Mercury Marine Gen-IV Cylinder Head Gasket
GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.580in. Bore
Product Attributes:
Engine Make/Size:Gm/mercury Marine Gen Iv Big Block
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-2BD52D3C5764-051New
Qty:
In Stock & Ready to Ship
$125.00
GM L18 Vortec 8100 Gen-VII Big Block V8 Cylinder Head Gasket
GM L18 Vortec 8100 Gen-VII Big Block V8 .051in. MLS Cylinder Head Gasket; 4.280in. Bore; LHS
Product Attributes:
Engine Make/Size:Gm/mercury Marine 8.1l
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.051". Left Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-06B5042C5634-051New
Qty:
In Stock & Ready to Ship
$114.71
GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.500in. Bore
Product Attributes:
Engine Make/Size:Gm/mercury Marine Gen Iv/v/iv Big Block
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-0BFE3AFC5702-040New
Qty:
In Stock & Ready to Ship
$145.42
GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
GM LSX Gen-4 Small Block V8 .040in. MLX Cylinder Head Gasket; 4.165in. Bore; RHS
Product Attributes:
Engine Make/Size:Gm Lsx
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Utilizes Integrated Stopper Layer For Combustion Chamber Sealing
Improved Clamp Load Around The Cylinder
Requires No Sealants Or Re-Torque
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". 18 Bolt Heads. Right Side. Cometic MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-544C02FC5703-040New
Qty:
In Stock & Ready to Ship
$145.42
GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
GM LSX Gen-4 Small Block V8 .040in. MLX Cylinder Head Gasket; 4.165in. Bore; LHS
Product Attributes:
Engine Make/Size:Gm Lsx
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Utilizes Integrated Stopper Layer For Combustion Chamber Sealing
Improved Clamp Load Around The Cylinder
Requires No Sealants Or Re-Torque
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". 18 Bolt Heads. Left Side. Cometic MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-41B76FAC5582-040New
Qty:
In Stock & Ready to Ship
$113.10
Chrysler R3 Race Block Cylinder Head Gasket
Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.185in. Bore; W7;W8;W9 Heads
Product Attributes:
Engine Make/Size:Chrysler/dodge R3 Iron NascarĀ«/late Model V8
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-246AE48C5637-051New
Qty:
In Stock & Ready to Ship
$114.71
GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.600in. Bore
Product Attributes:
Engine Make/Size:Gm/mercury Marine Gen Iv/v/iv Big Block
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Showing
1 -
10
of
173 Products for Engine Cylinder Head Gasket.