Finish Selecting Your Vehicle

Choose your Engine for your 2011 Ram 3500

  • 6 Cyl 6.7L
  • 8 Cyl 5.7L

Shop By Brand

The Following brands are available based on your search.

  • Design Engineering
    Design Engineering
  • Heatshield Products
    Heatshield Products
  • Mopar
    Mopar

Showing Products For 2011 Ram 3500 Exhaust Manifold Heat Shield

Below are all the different brands and applications for 2011 Ram 3500 Exhaust Manifold Heat Shield

Showing 1 - 6 of 6 Products for Exhaust Manifold Heat Shield.

Refine Your Search

Mopar
2011 Ram 3500 Exhaust Manifold Heat Shield 8 Cyl 5.7L Mopar

P311-26B8710    W0133-5209033  New

Qty:
In Stock & Ready to Ship
$18.07
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • For Manifold
Brand: Mopar
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Ram 3500 V 8 Cyl 5.7L 345 -
Heatshield Products
Exhaust Manifold Heat Shield Heatshield Products

P311-31903E2    177201  New

Qty:
In Stock & Ready to Ship
$77.30
Heatshield Products Exhaust Manifold Heat Shield
  • Exhaust heat shield kit, reduces up to 7% of heat, Water and element resistant
  • The Moto Heatshield Armor Kit reduces exhaust pipe temperatures up to 6% more than wrapped pipes. It's also easier to install and the longest lasting heatshield blanket for your pipes. Heatshield Armor withstands a continuous 1,8F.
  • Product Attributes:
    • Add On: 40085, 71416, 40359, 42541, 71229, 842515, 71226, 14419, 10416, 24222, 11226, 24215, 17713, 71419, 942546, 43041, 40659, 17733, 943045, 11229, 400844
    • Conductivity Warning: Caution This Material Is Electrically Conductive; Be Sure To Insulate Any Terminals That Might Come In Contact With This Product.
    • Electrical Warning: Caution This Material Is Electrically Conductive; Be Sure To Insulate Any Terminals That Might Come In Contact With This Product.
    • Install Tips: Locking Ties
    • Installation Tip: Locking Ties
    • Instructions Included:
      • Y
      • Yes
    • Insulation Type:
      • Product Can Be Placed In Direct Contact With Exhaust.
      • Product Can Be Placed In Direct Contact With Heat Source.
    • Operating Temperature: 1800f
    • Peak Temperature: 2200f
    • Product Dimensions: 1/4 Thk X 10 X 12 In
    • Prop 65 - Long Label: Warning: This Product Can Expose You To Chromium, A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
    • Prop 65 - Short Label: Prop 2065ca.pdf
    • Prop 65 (C, R or CR):
      • Cr
      • Warning - Both Cancer And Reproduction.jpg
    • Prop 65 Warning Chemical Listing: Warning: This Product Can Expose You To Chromium, A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
    • Safety Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Reduces radiant heat by up to 7%
    • Reduces heat into shock, improving handling
    • Reduces heat into air box, improving performance
  • Don't let the heat of your exhaust slow you down. The Moto Heatshield Armor Kit can reduce exhaust pipe temperatures up to 6% more than wrapped pipes. It is also easier to install and the longest lasting heatshield blanket available for your pipes. The abrasion-resistant Heatshield Armor cuts effortlessly with heavy-duty scissors, making it simple to wrap around the headers. Removal of the headers is not necessary for installation on many vehicles. Heatshield Armor can withstand a continuous 1,8 degrees Fahrenheit with intermittent spikes of 2,2 degrees, and it lasts longer than other exhaust wraps. In addition to being abrasion-resistant, Heatshield Armor has an aluminum layer that rejects chemicals. Because it does not completely wrap the entire header, it is compliant with most exhaust manufacturers' warranties. Shielding the heat away from your shock can prevent the shock from overheating. This will offer you improved handling and prolong the shock's life. In addition, the kit can be used to shield exhaust heat from the plenum, lowering air intake temps, that means more power! Heatshield Armor also results in hotter and faster-flowing exhaust gases that create a scavenging effect to pull intake gases through the system quicker. This lowers intake temperatures, resulting in more power.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle
Design Engineering
Exhaust Manifold Heat Shield Design Engineering

P311-3B389BF    10114  New

Qty:
In Stock & Ready to Ship
$98.64
Design Engineering Exhaust Manifold Heat Shield
  • Speed Sleeve™ Exhaust Wrap Jacket
  • Speed Sleeve™ Exhaust Wrap Jacket; Includes 12 ft. Of 8 in. Wide Exhaust Wrap/Lock Fasteners And Locking Ties; For Use With 4/6 Cylinders;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • Serves As An Insulator And Radiant Heat Barrier
    • Quick And Simple Installation
    • Supplied Wrap Covers Pipes Up To 2-1/4 in. Diameter
    • Includes 8 In. Wide Exhaust Wrap/ Lock Fasteners And Locking Ties
    • 12 Ft. Of 8 In. Wrap For 4 And 6 Cylinder
  • Speed Sleeves provide everything you need to cover and protect primary exhaust header pipes. An alternative to wrapping complete headers and ideal for spot protection from heat generating pipes and manifolds. They are easily installed in tight engine compartments. Great for trouble shooting specific components that are close to the exhaust header like ignition wires or fuel line. Serves as an insulator & radiant heat barrier Quick & simple installation Supplied wrap covers pipes up to 2.5 in. diameter 4 & 6 Cylinder Kit Includes: 12 ft x 8 in. wide exhaust wrap Lock fasteners Locking Ties 8 Cylinder Kit Includes: 16 ft x 8 in. wide exhaust wrap Lock fasteners Locking Ties

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle
Mopar
2011 Ram 3500 Exhaust Manifold Heat Shield 6 Cyl 6.7L Mopar

P311-05E6D5A    W0133-2604435  New

Qty:
In Stock & Ready to Ship
$19.93
  • EGR Cooling Pipe - Lower
Brand: Mopar
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Ram 3500 L 6 Cyl 6.7L 408 -
Mopar
2011 Ram 3500 Exhaust Manifold Heat Shield 6 Cyl 6.7L Mopar

P311-14F07B7    W0133-2603127  New

Qty:
In Stock & Ready to Ship
$131.57
  • EGR Cooling Pipe - Left
Brand: Mopar
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Ram 3500 L 6 Cyl 6.7L 408 -
Mopar
2011 Ram 3500 Exhaust Manifold Heat Shield 6 Cyl 6.7L Mopar

P311-1329FEC    W0133-2603128  New

Qty:
In Stock & Ready to Ship
$151.21
  • EGR Cooling Pipe - Right
Brand: Mopar
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Ram 3500 L 6 Cyl 6.7L 408 -

Showing 1 - 6 of 6 Products for Exhaust Manifold Heat Shield.