Shop By Brand

The Following brands are available based on your search.

  • Lokar
    Lokar
  • Standard Ignition
    Standard Ignition

Showing Products For 2011 Porsche Cayenne Headlight Wiring Harness

Below are all the different brands and applications for 2011 Porsche Cayenne Headlight Wiring Harness

Showing 1 - 5 of 5 Products for Headlight Wiring Harness.

Refine Your Search

Standard Ignition
2011 Porsche Cayenne Headlight Wiring Harness Standard Ignition

P311-2766F76    F90007  New

H10HWHF90007 , HWH102 , LWH105 , WHL105

Qty:
In Stock & Ready to Ship
$10.30
Standard Ignition Headlight Wiring Harness
  • Headlamp Wiring Harness
  • with H7 Bulb with 8 1/4" Harness
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm.
  • 14 gauge wire for better conductivity. Complete “plug & play” design plugs between the factory harness and new bulb for ease of installation. Can be used as a pigtail if the original connector is melted. High-temp connector prevents melting caused by high-intensity H7 bulbs.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle
2011 - Porsche Cayenne
Standard Ignition
2011 Porsche Cayenne Headlight Wiring Harness Standard Ignition

P311-3A4F634    LWH105  New

Qty:
In Stock & Ready to Ship
$13.18
  • with H7 Bulb with 8 1/4" Harness
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle
2011 - Porsche Cayenne
Standard Ignition
2011 Porsche Cayenne Headlight Wiring Harness Standard Ignition

P311-3822CB0    LWH100  New

Qty:
In Stock & Ready to Ship
$16.92
  • with H7 Bulb with 7" Harness
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle
2011 - Porsche Cayenne
Lokar
Headlight Wiring Harness Lokar

P311-091E1F5    HL-1900  New

Qty:
In Stock & Ready to Ship
$132.84
Lokar Headlight Wiring Harness
  • Anchor Tight Headlight Braid
  • Anchor Tight Headlight Braid; U-Cut-To-Fit; Includes Two 14 in. Braided Housings/Threaded Steel Studs/Hardware/Four 26 in. Headlight Wires; Stainless Steel Finish;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • U-Cut-To-Fit
    • Non-Kinking
    • Designed w/Threaded Steel Stud
    • Wont Leave Unsightly Wires Out In The Open
    • Headlight Braid Guarantees To Stay In Place
    • Clean Set Up
    • Billet Aluminum Fittings
    • Made In The U.S.A.
    • Lifetime Warranty
  • No, this is not just another headlight conduit. It is Lokars design technology for u-cut-to-fit , non-kinking, stainless steel headlight braid. Designed with threaded steel stud, insuring that you wont experience any of the typical separation between braid and fitting that shows unsightly wires out in the open. Pull, tug or bump your headlight braid and it will stay in place, leaving you with protected wires and a clean set up. Kit complete with two 12 in. flexible braided stainless steel Teflon lined housings, threaded steel studs, billet aluminum fittings, aluminum grill shell washers and headlight wire.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle
Lokar
Headlight Wiring Harness Lokar

P311-2C1A74F    XHL-1900  New

Qty:
In Stock & Ready to Ship
$146.68
Lokar Headlight Wiring Harness
  • Anchor Tight Headlight Braid
  • Anchor Tight Headlight Braid; U-Cut-To-Fit; Includes Two 14 in. Braided Housings/Threaded Steel Studs/Hardware/Four 26 in. Headlight Wires; Black Finish;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
  • Features:
    • U-Cut-To-Fit
    • Non-Kinking
    • Designed w/Threaded Steel Stud
    • Wont Leave Unsightly Wires Out In The Open
    • Headlight Braid Guarantees To Stay In Place
    • Clean Set Up
    • Black Fittings
    • Made In The U.S.A.
    • Lifetime Warranty
  • U-cut-to-fit design. Non-kinking with threaded steel stud. Wont leave unsightly wires out in the open. Headlight braid guarantees to stay in place. Clean set up with black fittings.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Lokar
Additional Fitment Information:
Vehicle

Showing 1 - 5 of 5 Products for Headlight Wiring Harness.