Finish Selecting Your Vehicle

Choose your Submodel for your 2011 Ford Fusion

  • S
  • SE

Shop By Brand

The Following brands are available based on your search.

  • FAG
    FAG
  • National
    National
  • National Bearing
    National Bearing
  • SKF
    SKF
  • Timken
    Timken

Showing Products For 2011 Ford Fusion Manual Transmission Output Shaft Seal

Below are all the different brands and applications for 2011 Ford Fusion Manual Transmission Output Shaft Seal

Showing 1 - 10 of 11 Products for Manual Transmission Output Shaft Seal.

Refine Your Search

SKF
2011 Ford Fusion Manual Transmission Output Shaft Seal SKF

P311-1D65313    W0133-1881685  New

Qty:
In Stock & Ready to Ship
$31.51
SKF Manual Transmission Output Shaft Seal
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: SKF
Additional Fitment Information:
Vehicle Submodel
2011 - Ford Fusion S
Timken
2011 Ford Fusion Manual Transmission Output Shaft Seal Timken

P311-53E9B13    2007N  New

Qty:
In Stock & Ready to Ship
$7.93
Timken Manual Transmission Output Shaft Seal
  • Grease/Oil Seal
  • Vent holes allow lubricants to flow freely around the seal lip - cooling seal components and removing heat build-up
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Timken
Additional Fitment Information:
Vehicle Trans Type Transmission Trans. Speed Transmission Manuf. Code
2011 - Ford Fusion Transaxle Manual 6 G6M
Timken
2011 Ford Fusion Manual Transmission Output Shaft Seal Timken

P311-53E9B13    2007N  New

Qty:
In Stock & Ready to Ship
$7.93
Timken Manual Transmission Output Shaft Seal
  • Grease/Oil Seal
  • Vent holes allow lubricants to flow freely around the seal lip - cooling seal components and removing heat build-up
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Timken
Additional Fitment Information:
Vehicle Trans Type Transmission Trans. Speed Drive Type
2011 - Ford Fusion Transaxle Manual 6 FWD
SKF
2011 Ford Fusion Manual Transmission Output Shaft Seal 4 Cyl 2.5L SKF

P311-178CED8    14006  New

Qty:
In Stock & Ready to Ship
$10.56
SKF Manual Transmission Output Shaft Seal
  • Seal
  • SKF has long been a leader in the design and development of seals, inventing the first integrated shaft seal in 1928. Since then we have continually pioneered new designs and bonding techniques. Our seals are made to specific designs using premium materials to ensure the seal has the correct properties for both the application and it's environment. SKF seals have been on the road for more than a hundred years, keeping lubricants in and contaminants out. SKF products are designed and manufactured to the highest quality standards, ensuring long life and safety.
Brand: SKF
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Ford Fusion L 4 Cyl 2.5L 152 2488
National Bearing
2011 Ford Fusion Manual Transmission Output Shaft Seal National Bearing

P311-3C4AD8C    710396  New

001-27-238 , 052-3513 , 052-3520 , 052-3595 , 14006 , 19016578 , 19016578B , 27611-72C00 , 43119-21000 , 43119-21010 , 43119-28000 , 43119-28001 , 43119-28002 , 43119-28003 , 43119-37000 , 43119-37010 , 53351-M2000 , 710396 , 91202-PCZ-003 , AC01-27-238 , B29147 , F001-27-238 , F001-27-238A , F003-27-238 , F003-27-238A , F003-27-238B , F003-27-238C , F004-27-238 , FO-260 , MA02-27-238 , MA02-27-238A , MB393139 , MB393932 , MD706433 , MD707184 , NJ749 , TO-36

Qty:
In Stock & Ready to Ship
$11.18
National Bearing Manual Transmission Output Shaft Seal
  • Oil Seal
  • with Mazda G66M-R Transmission
  • National 710396 Oil Seal
  • Product Attributes:
    • Helix Type: Bi-directional Lip Design
    • Housing Bore (Inch): 2.205
    • Inside Diameter:
      • 1.378
      • 35.000
    • Outside Diameter:
      • 2.213
      • 56.200
    • Outside Diameter (Inch): 2.213
    • Overall Width with Side Lip (MM): 12.000
    • Overall Width with Side Lip (Inch): 0.472
    • Part Description: Oil Seal
    • Sealing Material: Nitrile
    • Shaft (Inch): 1.378
    • Shaft (MM): 35.000
    • Unit of Dimension: Metric
    • Width (Inch): 0.354
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: National Bearing
Additional Fitment Information:
Vehicle Transmission Trans. Speed
2011 - Ford Fusion Manual 6
FAG
2011 Ford Fusion Manual Transmission Output Shaft Seal 6 Cyl 3.5L FAG

P311-3387A88    SS2475  New

14006 , 4132475100 , 710314

Qty:
In Stock & Ready to Ship
$11.05
  • Multi-purpose Oil Seal
  • FAG Global Number 413 2475 100
  • Product Attributes:
    • :
      • 1.378
      • 35.001
    • Bore Diameter:
      • 2.204
      • 55.982
    • Seal Outside Diameter:
      • 2.218
      • 56.337
    • Seal Type: Rubber; Spring; Auxilary Lip
    • Seal Width:
      • 1.378
      • 8.992
    • Sealing Material: Polyacrylate
  • Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG's quality standards. Seals are designed to protect wheel end components from contamination - such as dirt, dust, and moisture - and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: FAG
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Ford Fusion V 6 Cyl 3.5L 213 3496
FAG
2011 Ford Fusion Manual Transmission Output Shaft Seal 4 Cyl 2.5L FAG

P311-3387A88    SS2475  New

Qty:
In Stock & Ready to Ship
$11.05
  • Multi-purpose Oil Seal
  • DOHC 16 Valve FAG Global Number 413 2475 100
  • Product Attributes:
    • :
      • 1.378
      • 35.001
    • Bore Diameter:
      • 2.204
      • 55.982
    • Seal Outside Diameter:
      • 2.218
      • 56.337
    • Seal Type: Rubber; Spring; Auxilary Lip
    • Seal Width:
      • 1.378
      • 8.992
    • Sealing Material: Polyacrylate
  • Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG's quality standards. Seals are designed to protect wheel end components from contamination - such as dirt, dust, and moisture - and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: FAG
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Ford Fusion L 4 Cyl 2.5L 152 2488
FAG
2011 Ford Fusion Manual Transmission Output Shaft Seal 6 Cyl 3.0L FAG

P311-3387A88    SS2475  New

Qty:
In Stock & Ready to Ship
$11.05
  • Multi-purpose Oil Seal
  • DOHC FAG Global Number 413 2475 100
  • Product Attributes:
    • :
      • 1.378
      • 35.001
    • Bore Diameter:
      • 2.204
      • 55.982
    • Seal Outside Diameter:
      • 2.218
      • 56.337
    • Seal Type: Rubber; Spring; Auxilary Lip
    • Seal Width:
      • 1.378
      • 8.992
    • Sealing Material: Polyacrylate
  • Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG's quality standards. Seals are designed to protect wheel end components from contamination - such as dirt, dust, and moisture - and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: FAG
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Ford Fusion V 6 Cyl 3.0L 181 2968
FAG
2011 Ford Fusion Manual Transmission Output Shaft Seal 4 Cyl 2.5L FAG

P311-3387A88    SS2475  New

Qty:
In Stock & Ready to Ship
$11.05
  • Multi-purpose Oil Seal
  • Hybrid FAG Global Number 413 2475 100
  • Product Attributes:
    • :
      • 1.378
      • 35.001
    • Bore Diameter:
      • 2.204
      • 55.982
    • Seal Outside Diameter:
      • 2.218
      • 56.337
    • Seal Type: Rubber; Spring; Auxilary Lip
    • Seal Width:
      • 1.378
      • 8.992
    • Sealing Material: Polyacrylate
  • Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG's quality standards. Seals are designed to protect wheel end components from contamination - such as dirt, dust, and moisture - and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: FAG
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Ford Fusion L 4 Cyl 2.5L 152 2488
FAG
2011 Ford Fusion Manual Transmission Output Shaft Seal 6 Cyl 3.5L FAG

P311-3387A88    SS2475  New

Qty:
In Stock & Ready to Ship
$11.05
  • Multi-purpose Oil Seal
  • DOHC 24 Valve FAG Global Number 413 2475 100
  • Product Attributes:
    • :
      • 1.378
      • 35.001
    • Bore Diameter:
      • 2.204
      • 55.982
    • Seal Outside Diameter:
      • 2.218
      • 56.337
    • Seal Type: Rubber; Spring; Auxilary Lip
    • Seal Width:
      • 1.378
      • 8.992
    • Sealing Material: Polyacrylate
  • Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG's quality standards. Seals are designed to protect wheel end components from contamination - such as dirt, dust, and moisture - and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: FAG
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Ford Fusion V 6 Cyl 3.5L 213 3496

Showing 1 - 10 of 11 Products for Manual Transmission Output Shaft Seal.