2011 Chevrolet Express 1500 Fuel Pump Module Assembly Air and Fuel Delivery - ACDelco, Bosch, Carter, Delphi, Holley, US Motor Works

2011 Chevrolet Express 1500 Fuel Pump Module Assembly 6 Cyl 4.3L ACDelco

Part # P311-2C176A9 Manu # W0133-2214336 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $444.80

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
GM OE Lifetime Warranty
with Sliding Type Side Door

Brand: ACDelco

Vehicle	Block	Engine	CID	CC
2011 - Chevrolet Express 1500	V	6 Cyl 4.3L	262	-

2011 Chevrolet Express 1500 Fuel Pump Module Assembly 6 Cyl 4.3L Delphi

Part # P311-3383EEF Manu # FG1093 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19211042 , 19211077 , 19258178 , 19301233 , 19301234 , 19329219 , 19352936 , 69792 , A31009 , DFG1093 , E4048M , E4049M , EP1032 , M100209 , M10258 , M3542427 , MU2202 , MU2203 , MU2262 , P76722M , SK1435 , SP6626M , SP6702M

Qty:

In Stock & Ready to Ship

Best Price: $236.17

Fuel Pump Module Assembly
Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Product Attributes:
- Average Current Draw: 11
- Average Flow Rating: 21
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 80.0
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 3
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 250.0
- Resistance Ohms Full: 40.0
- Strainer Included: Yes
- System Pressure: 58 Psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Vapor Pressure Sensor: Yes
- Voltage: 12.0
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Brand: Delphi

Vehicle	Block	Engine	CID	CC
2011 - Chevrolet Express 1500	V	6 Cyl 4.3L	262	-

2011 Chevrolet Express 1500 Fuel Pump Module Assembly 8 Cyl 5.3L Delphi

Part # P311-02B7CA8 Manu # FG2176 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19259484 , 19301231 , DFG2176 , M100065 , MU2111 , SP6712M

Qty:

In Stock & Ready to Ship

Best Price: $521.48

Fuel Pump Module Assembly
Except Left Side Rear Hinged Door; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Product Attributes:
- Average Current Draw: 10
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Flex
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 3
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 250.0
- Resistance Ohms Full: 40.0
- Strainer Included: Yes
- System Pressure: 51 Psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Vapor Pressure Sensor: Yes
- Voltage: 12.0
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Brand: Delphi

Vehicle	Block	Engine	CID	CC
2011 - Chevrolet Express 1500	V	8 Cyl 5.3L	325	5328

Bosch

2011 Chevrolet Express 1500 Fuel Pump Module Assembly 6 Cyl 4.3L Bosch - Fuel Pump Module Assembly (New)

Part # P311-44AE9EC Manu # 69792 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19301233 , 19352936

Qty:

In Stock & Ready to Ship

Best Price: $207.58

Click Here to View Product Images

Bosch Fuel Pump Module Assembly
Except left side rear hinged door
Fuel Pump Module Assembly (New)
Product Attributes:
- Cases Per Pallet (ORLY): 25
- Electric Or Mechanical: Electric
- Gaskets Included (Fuel Pump): Yes
- In Tank Or External: Internal
- In-Line Pump: N
- Inlet Count: 1
- Mounting Hardware Included: No
- Negative Ground: No
- New Or Remanufactured: New
- Outlet Quantity: 1
- Package Contents: 1 Module Assembly
- Prefiltro usado con bomba: Yes
- Prop 65 Warning Label Required?: No
- Pump Only Or Module: Module
- Unit(s) per Car Qty (ORLY): 1
Features:
- Bosch "Better than OE design", improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
- Bosch Aftermarket Fuel Assemblies are built and tested to the same rigorous quality standards as our OE fuel pumps to ensure a long, reliable service life
- Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
- Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
- All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.
Nuestro equipo de ingenieros de Bosch lleva los beneficios de las bombas de combustible premium al mercado de repuestos automotrices. Las bombas de combustible Bosch se fabrican en las mismas líneas de producción y luego se fabrican y luego se prueban con los mismos estándares de calidad rigurosos que las bombas de combustible Bosch de equipo original para garantizar una vida útil prolongada y confiable. Haga el trabajo bien la primera vez, siempre, con las bombas de combustible Bosch Premium.

Brand: Bosch

Vehicle	Block	Engine	CID	CC
2011 - Chevrolet Express 1500	V	6 Cyl 4.3L	262	-

Bosch

2011 Chevrolet Express 1500 Fuel Pump Module Assembly 6 Cyl 4.3L Bosch - Fuel Pump Module Assembly (New)

Part # P311-254C7C4 Manu # 67799 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19211077 , 19301234

Qty:

In Stock & Ready to Ship

Best Price: $216.95

Click Here to View Product Images

Bosch Fuel Pump Module Assembly
With left side rear hinged door
Fuel Pump Module Assembly (New)
Product Attributes:
- Cases Per Pallet (ORLY): 30
- Electric Or Mechanical: Electric
- Gaskets Included (Fuel Pump): Yes
- In Tank Or External: Internal
- In-Line Pump: N
- Inlet Count: 1
- Mounting Hardware Included: No
- Negative Ground: No
- New Or Remanufactured: New
- Outlet Quantity: 1
- Package Contents: 1 Module Assembly
- Prefiltro usado con bomba: Yes
- Prop 65 Warning Label Required?: No
- Pump Only Or Module: Module
- Unit(s) per Car Qty (ORLY): 1
Features:
- Bosch "Better than OE design", improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
- Bosch Aftermarket Fuel Assemblies are built and tested to the same rigorous quality standards as our OE fuel pumps to ensure a long, reliable service life
- Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
- Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
- All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.
Nuestro equipo de ingenieros de Bosch lleva los beneficios de las bombas de combustible premium al mercado de repuestos automotrices. Las bombas de combustible Bosch se fabrican en las mismas líneas de producción y luego se fabrican y luego se prueban con los mismos estándares de calidad rigurosos que las bombas de combustible Bosch de equipo original para garantizar una vida útil prolongada y confiable. Haga el trabajo bien la primera vez, siempre, con las bombas de combustible Bosch Premium.

Brand: Bosch

Vehicle	Block	Engine	CID	CC
2011 - Chevrolet Express 1500	V	6 Cyl 4.3L	262	-

2011 Chevrolet Express 1500 Fuel Pump Module Assembly 6 Cyl 4.3L Carter

Part # P311-1C6A037 Manu # P76722M Condition: New

This Part Fits the Following OEM/Substitute Numbers: 1234698 , 19211077 , 19301234 , 19352936 , 2920693 , 2920963 , 67799 , A31009 , B11111774TG , C-0394-M , C0394M , E4048M , FG0933 , FG1093 , M3542427 , MU1937 , SP6626M

Qty:

In Stock & Ready to Ship

Best Price: $227.87

Fuel Pump Module Assembly
with Left Side Rear Hinged Door; May Require Wiring Harness 888-601. Check Prior to Installation
Product Attributes:
- Connector Shape: Oval
- Fuel Filter Included: No
- Fuel Sending Unit Included: Yes
- Grade Type: Regular
- Inlet Fitting Thread Size: 3/8
- Minimum Flow Rating:
  - 28
  - 28.0
- Minimum Pressure: 60.0
- Mounting Hardware Included: No
- Outlet Outside Diameter: 9.5
- Pump Type: Electric
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Type: Blade
- Voltage: 12v
- Wire Harness Included: No
The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

Brand: Carter

Vehicle	Block	Engine	CID	CC
2011 - Chevrolet Express 1500	V	6 Cyl 4.3L	262	-

2011 Chevrolet Express 1500 Fuel Pump Module Assembly 6 Cyl 4.3L US Motor Works - ELECTRIC FUEL PUMP MODULE

Part # P311-0B8E7FD Manu # USEP4049M Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $212.16

Exc.Left Side Rear Hinged Door
ELECTRIC FUEL PUMP MODULE
Product Attributes:
- California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
Includes: Tank Seal

Brand: US Motor Works

Vehicle	Fuel Type	Block	Engine	CID	CC
2011 - Chevrolet Express 1500	GAS	V	6 Cyl 4.3L	262	-

Fuel Pump Module Assembly Delphi

Part # P311-1AC5F71 Manu # FG1483 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 3924710C1 , EFG1483

Qty:

In Stock & Ready to Ship

Best Price: $259.10

Fuel Pump Module Assembly
Product Attributes:
- Average Current Draw: 10
- Average Flow Rating: 46
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 80.0
- Notes: Used On 2012 F64 Navistar
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 2
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: Yes
- System Pressure: 54 Psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Vapor Pressure Sensor: Yes
- Voltage: 13.0
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Delphi

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-1236054 Manu # 12-132 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $780.02

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 450 LPH; Install In Any Tank From 7 in. to 12 in. Deep;
Product Attributes:
- Diameter (in.): 4.800 In.
- Fuel Type:
  - E85
  - Gasoline
- Fully Open: 450
- Material: Billet Aluminum
- WARNING CA Proposition 65: No
Features:
- Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
- The Low Profile Design For Added Clearance When Needed
- Clamping System Allows You To Locate Module Anywhere In The Tank
- 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
- Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
- Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
- 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
Holley manufactures high performance carburetors, manifolds, superchargers, water pumps, throttle body fuel injection and fuel pumps for street and race applications. In producing these parts, Holley prides itself in utilizing the latest technology in a lean environment to provide the highest quality parts at the best value to the customer. CNC programs can be generated on a workstation, directly from a customer's solid model. Each engineering work station is networked to each of the CNC machining centers and CNC turning centers. This configuration provides a streamlined flow of data throughout the factory, as well as data acquisition capabilities. Fixture and tool design can be accomplished in house, utilizing Pro/Engineer software. A computerized PM (preventative maintenance) network application is used to ensure all machinery is performing at the highest level. Holley's machining departments range from small drilling and tapping centers to large four and five-axis high speed machining centers. Many are equipped with automatic pallet changers to facilitate the highest level of spindle up-time. Also included are CNC turning centers. An in-house tool room and maintenance department is comprised of a CNC wire EDM, CNC die-sinking EDM, Ewag tool grinder, and a host of manual machines.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-52782C4 Manu # 12-147 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $694.19

Drop In Fuel Pump Module Assembly
Drop In Fuel Pump Module Assembly; Dual Pumps; Free Flow LPH 450; 8AN Inlet/10 AN Outlet; For Use w/12 Bolt Flange Fuel Cells;
Product Attributes:
- Flange Type: 12 Bolt
- Free Flow GPH: 230
- Fuel Type:
  - E85
  - Gasoline
- Fully Open: 900
- Inlet Size: 8an
- Maximum PSI: 87
- Outlet Size: 10an
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Complete Drop-In Fuel Module Assembly
- Billet Top Flange Housing
- Pump Depth Is Fully Adjustable For Fitment
Holley now offers offers a line of high performance Drop-in fuel modules to cover a wide ranges of vehicles from sports cars to pickup trucks. These Drop-in modules have been designed to the highest quality standards to provide increased performance and fuel efficiency for most stock, turbo, and supercharged applications capable of supporting 600+ horsepower.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 2011 Chevrolet Express 1500 Fuel Pump Module Assembly