Finish Selecting Your Vehicle

Choose your Submodel for your 2011 Chevrolet Corvette

  • Base
  • Grand Sport
  • ZR1

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • BBK Performance
    BBK Performance
  • Cardone
    Cardone
  • Dorman
    Dorman
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Hitachi
    Hitachi
  • Holley
    Holley
  • MSD
    MSD
  • Standard Ignition
    Standard Ignition

Showing Products For 2011 Chevrolet Corvette Fuel Injection Throttle Body

Below are all the different brands and applications for 2011 Chevrolet Corvette Fuel Injection Throttle Body

Showing 1 - 10 of 48 Products for Fuel Injection Throttle Body.

Refine Your Search

ACDelco
2011 Chevrolet Corvette Fuel Injection Throttle Body ACDelco

P311-0A29D4A    W0133-1949671  New

Qty:
In Stock & Ready to Ship
$486.01
ACDelco Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
Brand: ACDelco
Additional Fitment Information:
Vehicle Aspiration
2011 - Chevrolet Corvette Supercharged
Hitachi
2011 Chevrolet Corvette Fuel Injection Throttle Body Hitachi

P311-13D9935    W0133-1949671  New

Qty:
In Stock & Ready to Ship
$372.74
Hitachi Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Hitachi
Additional Fitment Information:
Vehicle Aspiration
2011 - Chevrolet Corvette Supercharged
ACDelco
2011 Chevrolet Corvette Fuel Injection Throttle Body 8 Cyl 6.2L ACDelco - Fuel Injection Throttle Body; INCLUDES THROTTLE ACTUATOR

P311-13DB99E    217-3151  New

Qty:
In Stock & Ready to Ship
$288.35
ACDelco Fuel Injection Throttle Body
  • Fuel Injection Throttle Body; INCLUDES THROTTLE ACTUATOR
Brand: ACDelco
Additional Fitment Information:
Vehicle Engine Designation Engine VIN Block Engine
2011 - Chevrolet Corvette LS9 T V 8 Cyl 6.2L
ACDelco
2011 Chevrolet Corvette Fuel Injection Throttle Body 8 Cyl 6.2L ACDelco

P311-0F6D4D4    W0133-5190836  New

Qty:
In Stock & Ready to Ship
$539.80
ACDelco Fuel Injection Throttle Body
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
Brand: ACDelco
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
2011 - Chevrolet Corvette Naturally Aspirated V 8 Cyl 6.2L 376 6162
BBK Performance
2011 Chevrolet Corvette Fuel Injection Throttle Body 8 Cyl 6.2L BBK Performance - Power-Plus Series® Performance Throttle Body

P311-223C12D    1789  New

Qty:
In Stock & Ready to Ship
$451.54
BBK Performance Fuel Injection Throttle Body
  • Size 95 mm.; Reuse Factory OEM Electronics; No Tune Required;CARB E.O. D-245-17
  • Power-Plus Series® Performance Throttle Body; Size 95 mm.; Reuse Factory OEM Electronics; No Tune Required;
  • Power-Plus Series® Performance Throttle Body
  • Product Attributes:
    • Bore Diameter: 95mm
    • Fuel Injectors Included: No
    • Idle AirControl Motor Included: No
    • Original Equipment Replacement: Yes
    • Throttle Body Finish: Cnc Machined
    • Throttle Body Material: Cast Aluminum
    • Throttle Body Spacer Color: Natural
    • Throttle Body Spacer Included: No
    • Throttle Body Type: Power Plus Series
    • Throttle Position Sensor Incl: No
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm (for A List Of Chemicals And More Information Go To Www.p65warnings.ca.gov)
  • Features:
    • Direct Fit Bolt On High Flow 95mm Throttle Body
    • Increased Air-Flow Over Stock Unit For Addl Horsepower And Torque
    • Improved Throttle Response And Acceleration
    • Re-Uses Factory OEM Electronics
    • No Tune Required
    • All New CNC Machined Castings Not A Bored Out Unit
    • Factory Style Precision Die Stamped Linkage
    • Double Sealed Roller Bearings With O Ringed Shafts
    • BBK Is Your Number One Aftermarket Performance Brand
    • Made In The USA
  • BBK Performance throttle bodies are designed as a direct replacement for the restrictive stock factory throttle body. All BBK Power Plus throttle bodies offer OEM drive ability but with up to 30% improved airflow for improved horsepower, torque and throttle response. Every BBK throttle body is CNC Machined from a new high quality 356 aluminum casting and assembled with features like OEM style die stamped throttle linkages, double sealed bearings, and o ringed throttle shafts to make every BBK throttle body the best on the market today. All BBK Performance throttle bodies are designed to improve performance and they work with the vehicles factory tune. No tune is required and BBK throttle bodies are available for many late model American muscle cars and trucks. 50 State Legal - CARB Approved 95mm throttle body for all - 2009-2013 Chevrolet Corvette LS3 And 2010-2015 Camaro 6.2L LS3, L99
Brand: BBK Performance
Additional Fitment Information:
Vehicle Engine Designation Aspiration Engine VIN Block Engine CID CC
2011 - Chevrolet Corvette LS3 Naturally Aspirated W V 8 Cyl 6.2L 376 6162
Cardone
2011 Chevrolet Corvette Fuel Injection Throttle Body 8 Cyl 6.2L Cardone - Fuel Injection Throttle Body

P311-22B2552    67-3013  Remanufactured

12601387 , 12629992

Qty:
In Stock & Ready to Ship
$26.10 $90.03
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • E-Waste: Yes
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • How Do You Clean?
      • How Do You Test?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
      • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
      • What Causes The Electronic Throttle Body To Fail?
      • What Do You Replace?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
    • Features and Benefits:
      • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
      • Each Unit Is Guaranteed To Function Like The Original.
      • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
    • Housing Color/Finish: Gray/unfinished
    • Housing Material: Aluminum
    • Package Contents: Electronic Throttle Body, Instruction Sheet
    • Product Condition: Remanufactured
    • Throttle Body Actuation Type: Electric
    • Throttle Body Inlet Shape: Round
    • Throttle Body Outlet Shape: Round
    • Throttle Position Sensor Included: Yes
  • Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
2011 - Chevrolet Corvette ZR1 V 8 Cyl 6.2L 376 6162
Cardone
2011 Chevrolet Corvette Fuel Injection Throttle Body Cardone

P311-102AF1A    W0133-2222610  Remanufactured

Qty:
In Stock & Ready to Ship
$39.00 $235.54
Cardone Fuel Injection Throttle Body
  • Remanufactured
Brand: Cardone
Additional Fitment Information:
Vehicle Aspiration
2011 - Chevrolet Corvette Supercharged
Cardone
2011 Chevrolet Corvette Fuel Injection Throttle Body 8 Cyl 6.2L Cardone

P311-02441F5    W0133-2228796  Remanufactured

Qty:
In Stock & Ready to Ship
$17.00 $341.05
Cardone Fuel Injection Throttle Body
  • Remanufactured
Brand: Cardone
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
2011 - Chevrolet Corvette Naturally Aspirated V 8 Cyl 6.2L 376 6162
Cardone
2011 Chevrolet Corvette Fuel Injection Throttle Body 8 Cyl 7.0L Cardone - Fuel Injection Throttle Body

P311-390C577    6E-3034  New

12605109

Qty:
In Stock & Ready to Ship
$179.61
Cardone Fuel Injection Throttle Body
  • Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
  • Fuel Injection Throttle Body
  • Product Attributes:
    • FAQs:
      • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
      • Are Your New Throttle Bodies The Same Design As Oe?
      • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
      • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
      • Do You Sell Throttle Body Spacers?
      • Is It Ok To Bypass The Coolant Hoses?
      • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
      • No, Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
      • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
      • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
      • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
      • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
      • The New Electronic Throttle Body Is Designed And Manufactured To Meet Oe Manufacturer Standards.
      • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
      • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
      • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
      • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
      • What Causes The Electronic Throttle Body To Fail?
      • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
      • What Happens When An Electronic Throttle Body Fails?
      • What’s An Electronic Throttle Body?
      • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
      • When Installing The New Electronic Throttle Body There Is No Need To Modify The Vehicle For Installation.
      • Will I Have To Modify Anything On The Vehicle To Install Your New Throttle Body?
    • Features and Benefits:
      • 100% Computerized Testing Of Motor, Throttle Position Sensor And Articulation Ensures Reliable And Consistent Performance.
      • Critical Components Used In Manufacturing The Electronic Throttle Body, Including The Housing, Throttle Plate, Position Sensors, Throttle Actuator Motor And Throttle Plate Return Spring Conform To Precise O.e. Dimensions.
      • Each Throttle Body Is Tested For All Critical Functions, Including Response Time And Air Flow At Multiple Points, Ensuring An Optimal Fuel/air Ratio.
      • Each Unit Is Guaranteed To Fit And Function Like The Original.
  • All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
2011 - Chevrolet Corvette V 8 Cyl 7.0L 427 7011
BBK Performance
2011 Chevrolet Corvette Fuel Injection Throttle Body 8 Cyl 6.2L BBK Performance - Power-Plus Series® Performance Throttle Body

P311-120EFD4    1783  New

Qty:
In Stock & Ready to Ship
$407.48
BBK Performance Fuel Injection Throttle Body
  • Size 92 mm.; 4-Bolt Cable Drive;Not Legal For Sale Or Use On Vehicles Registered In California
  • Power-Plus Series® Performance Throttle Body; Size 92 mm.; 4-Bolt Cable Drive;
  • Power-Plus Series® Performance Throttle Body
  • Product Attributes:
    • Bore Diameter: 92mm
    • Fuel Injectors Included: No
    • Idle AirControl Motor Included: No
    • Original Equipment Replacement: Yes
    • Throttle Body Finish: Cnc Machined
    • Throttle Body Material: Cast Aluminum
    • Throttle Body Spacer Color: Natural
    • Throttle Body Spacer Included: No
    • Throttle Body Type: Power Plus Series
    • Throttle Position Sensor Incl: No
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Which Are Known To The State Of California To Cause Cancer And Birth Defects; Or Other Reproductive Harm (for A List Of Chemicals And More Information Go To Www.p65warnings.ca.gov)
  • Features:
    • Direct Fit Bolt On High Flow 92mm Throttle Body
    • Increased Air-Flow Over Stock Unit For Addl Horsepower And Torque
    • Improved Throttle Response And Acceleration
    • New Hardware And Gaskets Included If Required
    • No Tune Required
    • All New CNC Machined Castings Not A Bored Out Unit
    • Factory Style Precision Die Stamped Linkage
    • Double Sealed Roller Bearings With O Ringed Shafts
    • BBK Is Your Number One Aftermarket Performance Brand
    • Made In The USA
  • This is a Cable Drive throttle body for retro swap applications. All BBK Power Plus throttle bodies offer OEM drive ability but with up to 30% improved airflow for improved horsepower, torque and throttle response. Every BBK throttle body is CNC Machined from a new high quality 356 aluminum casting and assembled with features like OEM style die stamped throttle linkages, double sealed bearings, and o ringed throttle shafts to make every BBK throttle body the best on the market today. All BBK Performance throttle bodies are designed to improve performance and they work with the vehicles factory tune. No tune is required and BBK throttle bodies are available for many late model American muscle cars and trucks.
Brand: BBK Performance
Additional Fitment Information:
Vehicle Engine Designation Aspiration Engine VIN Block Engine CID CC
2011 - Chevrolet Corvette LS3 Naturally Aspirated W V 8 Cyl 6.2L 376 6162

Showing 1 - 10 of 48 Products for Fuel Injection Throttle Body.