Finish Selecting Your Vehicle

Choose your Engine for your 2010 Nissan Versa

  • 4 Cyl 1.6L
  • 4 Cyl 1.8L

Shop By Brand

The Following brands are available based on your search.

  • Aftermarket
    Aftermarket
  • AutoBest
    AutoBest
  • Autopart International
    Autopart International
  • CARQUEST
    CARQUEST
  • Delphi
    Delphi
  • Holley
    Holley
  • TYC Products
    TYC Products
  • US Motor Works
    US Motor Works

Showing Products For 2010 Nissan Versa Fuel Pump Module Assembly

Below are all the different brands and applications for 2010 Nissan Versa Fuel Pump Module Assembly

Showing 1 - 10 of 25 Products for Fuel Pump Module Assembly.

Refine Your Search

Delphi
2010 Nissan Versa Fuel Pump Module Assembly Delphi

P311-266E537    W0133-1957647  New

Qty:
In Stock & Ready to Ship
$743.54
Delphi Fuel Pump Module Assembly
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Lifetime Warranty
Brand: Delphi
Additional Fitment Information:
Vehicle
2010 - Nissan Versa
Aftermarket
2010 Nissan Versa Fuel Pump Module Assembly Aftermarket - DREIK, Made in Japan

P311-2CB8EC5    W0133-1957647  New

Qty:
In Stock & Ready to Ship
$323.92
Aftermarket Fuel Pump Module Assembly
  • DREIK, Made in Japan
Brand: Aftermarket
Additional Fitment Information:
Vehicle
2010 - Nissan Versa
TYC Products
2010 Nissan Versa Fuel Pump Module Assembly - Primary TYC Products - TYC CRQ Premium Fuel Pump Module

P311-504E164    150314-A  New

17040-1FC0B , 17040-9EG0C , 550-2090 , E8855M , P76612M , P77095M , SP4022M , SP4099M

Qty:
In Stock & Ready to Ship
$116.44
TYC Products Fuel Pump Module Assembly  Primary
  • TYC CRQ Premium Fuel Pump Module
  • Product Attributes:
    • Accessories Included: Yes
    • Connector Pins Qty On Main Connector: 5pins
    • Fuel Level Sensor Resitance Range: 81-5
    • Fuel Tube Connection Type: Quick Connect
    • Gph (gallons Per Hour Flow): 37-46
    • Maximum Air Pressure: 48-54
    • Strainer Included: Yes(internal)
Brand: TYC Products
Position: Primary
Additional Fitment Information:
Vehicle Body Position
2010 - Nissan Versa Sedan Primary
Autopart International
2010 Nissan Versa Fuel Pump Module Assembly Autopart International

P311-094820A    W0133-3403832  New

Qty:
In Stock & Ready to Ship
$171.28
Autopart International Fuel Pump Module Assembly
Brand: Autopart International
Additional Fitment Information:
Vehicle
2010 - Nissan Versa
AutoBest
2010 Nissan Versa Fuel Pump Module Assembly 4 Cyl 1.8L AutoBest

P311-4FB98C6    F4866A  New

Qty:
In Stock & Ready to Ship
$126.58
AutoBest Fuel Pump Module Assembly
  • Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir and Fuel Strainer
Brand: AutoBest
Additional Fitment Information:
Vehicle Block Engine CID CC
2010 - Nissan Versa L 4 Cyl 1.8L - 1798
US Motor Works
2010 Nissan Versa Fuel Pump Module Assembly 4 Cyl 1.6L US Motor Works - ELECTRIC FUEL PUMP MODULE

P311-47659D0    USEP8855M  New

Qty:
In Stock & Ready to Ship
$224.61
US Motor Works Fuel Pump Module Assembly
  • ELECTRIC FUEL PUMP MODULE
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
Brand: US Motor Works
Additional Fitment Information:
Vehicle Block Engine CID CC
2010 - Nissan Versa L 4 Cyl 1.6L 98 1598
Delphi
2010 Nissan Versa Fuel Pump Module Assembly 4 Cyl 1.6L Delphi

P311-2F2B389    FG1149  New

17040-1FC0A , 17040-1FC0B , 17040-9EG0B , 17040-9EG0C , 17040-EM30A , 17040-EM31A , 17040-ZR70B , 170401FC0B , 170409EG0B , 170409EG0C , 17040EM30A , 17040EM31A , 17040ZR70B , 25060-1FC0A , 25060-1FC1A , 25060-1FC1B , A38009 , CFG1149 , E8855M , M2480552 , P76612M , P77095M , SP4022M , SP4099M

Qty:
In Stock & Ready to Ship
$309.81
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 7
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 80.0
    • Outlet Outside Diameter: 0.375
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 80.0
    • Resistance Ohms Full: 5.0
    • Strainer Included: Yes
    • System Pressure: 51 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 5
    • Terminal Type: Blade
    • Vapor Pressure Sensor: No
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Block Engine CID CC
2010 - Nissan Versa L 4 Cyl 1.6L 98 1598
Delphi
Fuel Pump Module Assembly Delphi

P311-1AC5F71    FG1483  New

3924710C1 , EFG1483

Qty:
In Stock & Ready to Ship
$255.27
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 46
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 80.0
    • Notes: Used On 2012 F64 Navistar
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 180.0
    • Resistance Ohms Full: 10.0
    • Strainer Included: Yes
    • System Pressure: 54 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Delphi
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-473F3E1    12-131  New

Qty:
In Stock & Ready to Ship
$705.55
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Returnless; Installs In Any Tank From 7.25 in. To 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-3FEFDF7    12-130  New

Qty:
In Stock & Ready to Ship
$851.97
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Install In Any Tank From 6.5 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 25 Products for Fuel Pump Module Assembly.