Finish Selecting Your Vehicle

Choose your Engine for your 2010 Mercury Mariner

  • 4 Cyl 2.5L
  • 6 Cyl 3.0L

Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Centric
    Centric
  • Dynamic Friction
    Dynamic Friction
  • Mando
    Mando
  • Motorcraft
    Motorcraft
  • Powerstop
    Powerstop
  • Raybestos
    Raybestos

Showing Products For 2010 Mercury Mariner Disc Brake Caliper

Below are all the different brands and applications for 2010 Mercury Mariner Disc Brake Caliper

Showing 1 - 10 of 48 Products for Disc Brake Caliper.

Refine Your Search

Motorcraft
2010 Mercury Mariner Disc Brake Caliper - Front Right Motorcraft - Friction Ready

P311-037010A    W0133-1943375  Remanufactured

Qty:
In Stock & Ready to Ship
$57.00 $150.61
Motorcraft Disc Brake Caliper  Front Right
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Remanufactured
  • From 12/03/09
  • Friction Ready
Brand: Motorcraft
Position: Front Right
Additional Fitment Information:
Vehicle Position
2010 - Mercury Mariner Front Right
Motorcraft
2010 Mercury Mariner Disc Brake Caliper - Front Left Motorcraft - Friction Ready

P311-1FA15B0    W0133-1943376  Remanufactured

Qty:
In Stock & Ready to Ship
$57.00 $150.61
Motorcraft Disc Brake Caliper  Front Left
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Remanufactured
  • From 12/03/09
  • Friction Ready
Brand: Motorcraft
Position: Front Left
Additional Fitment Information:
Vehicle Position
2010 - Mercury Mariner Front Left
Cardone
2010 Mercury Mariner Disc Brake Caliper - Rear Right Cardone - Unloaded Caliper

P311-030B133    18-4942  Remanufactured

5L8Z2552AA , 6L8Z2552A , EFY52661X , EFY62661X

Qty:
In Stock & Ready to Ship
$2.70 $44.22
Cardone Disc Brake Caliper  Rear Right
  • with Metal Piston Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 1.573
    • Piston Size (OD) (mm): 39.9542
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Right
Additional Fitment Information:
Vehicle Position
2010 - Mercury Mariner Rear Right
Cardone
2010 Mercury Mariner Disc Brake Caliper - Rear Left Cardone - Unloaded Caliper

P311-15AFCE0    18-4943  Remanufactured

5L8Z2553AA , 6L8Z2553A , EFY52671X , EFY62671X

Qty:
In Stock & Ready to Ship
$2.70 $44.22
Cardone Disc Brake Caliper  Rear Left
  • with Metal Piston Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 1.573
    • Piston Size (OD) (mm): 39.9542
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Left
Additional Fitment Information:
Vehicle Position
2010 - Mercury Mariner Rear Left
Centric
2010 Mercury Mariner Disc Brake Caliper - Front Left Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-32ECD83    141.65082  Remanufactured

Qty:
In Stock & Ready to Ship
$55.00 $44.51
Centric Disc Brake Caliper  Front Left
  • Centric Semi-Loaded Brake Caliper
  • Steel Piston
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 0.375
      • 3/8"-24
    • Bore Size mm: 66
    • Bore Size(s) millimeters: 66
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Casting Material: Cast Iron
    • Caliper Color: Gray
    • Caliper Type: Floating
    • Casting Material: Cast Iron
    • Friction Materials Standards Institute Pad Number: 10x.10470
    • Grade Type: Regular
    • Inlet Fitting Type: Bubble
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Pads Included: No
    • Piston 1 Diameter: 66.000
    • Piston 2 Diameter: 66.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Left
Additional Fitment Information:
Vehicle Position
2010 - Mercury Mariner Front Left
Centric
2010 Mercury Mariner Disc Brake Caliper - Front Right Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-2AF599B    141.65081  Remanufactured

Qty:
In Stock & Ready to Ship
$55.00 $44.51
Centric Disc Brake Caliper  Front Right
  • Centric Semi-Loaded Brake Caliper
  • Steel Piston
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 0.375
      • 3/8"-24
    • Bore Size mm: 66
    • Bore Size(s) millimeters: 66
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Casting Material: Cast Iron
    • Caliper Color: Gray
    • Caliper Type: Floating
    • Casting Material: Cast Iron
    • Friction Materials Standards Institute Pad Number: 10x.10470
    • Grade Type: Regular
    • Inlet Fitting Type: Bubble
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Pads Included: No
    • Piston 1 Diameter: 66.000
    • Piston 2 Diameter: 66.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Right
Additional Fitment Information:
Vehicle Position
2010 - Mercury Mariner Front Right
Cardone
2010 Mercury Mariner Disc Brake Caliper - Front Right Cardone - Unloaded Caliper w/Bracket

P311-34CB7E9    18-B5277  Remanufactured

9L8Z2B120A , ZZD03361X

Qty:
In Stock & Ready to Ship
$38.70 $44.38
Cardone Disc Brake Caliper  Front Right
  • with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.595
    • Piston Size (OD) (mm): 65.913
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
2010 - Mercury Mariner Front Right
Powerstop
2010 Mercury Mariner Disc Brake Caliper - Front Left 4 Cyl 2.5L Powerstop - Autospecialty By Power Stop Remanufactured Calipers w/Brackets

P311-3DDE386    L5276  New

Qty:
In Stock & Ready to Ship
$28.00 $50.53
Powerstop Disc Brake Caliper  Front Left
  • AS CALIPER W/BRKT
  • Bracket Included~Phenolic Pistons
  • DIRECT REPLACEMENT CALIPER
  • Autospecialty By Power Stop Remanufactured Calipers w/Brackets
  • Product Attributes:
    • Abutment Clips Included: No
    • Anti-Rattle Spring Included: Yes
    • Bleeder Screw Included: Yes
    • Bleeder Screw Thread Diameter: 0.375 In.
    • Bleeder Screw Thread Size: 3/8 X 24
    • Bleeder Screw Threads Per Inch: 24 In.
    • Brake Pads Included: No
    • Caliper Casting Material: Cast Iron
    • Caliper Color: Gray
    • Caliper Piston Material: Phenolic
    • Caliper Piston Quantity: 1
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Grade Type: Regular
    • Inlet Fitting Type: Hard Line
    • Inlet Thread Diameter: 0.375 In.
    • Inlet Thread Size: 3/8 X 24 In.
    • Mounting Bolt Included: No
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: No
    • Mounting Hole Diameter: 14.00mm
    • Pad Wear Sensor Included: No
    • Piston Diameter: 66.04mm
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: This Product Can Expose You To Chemicals Including Lead; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The State
      • Warning: This Product Can Expose You To Chemicals Including Lead; Chromium [hexavalent Compounds]; Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium [hexavalent Compounds] Which Are Known To The State
  • Features:
    • 100 Percent Pressure Tested To Prevent Leaks
    • Brand New Components
    • Includes Seals/boots/bleeder Screws/Hardware/Pins
    • High Temperature EPDM Rubber For Extended Life
    • Premium Silicone Lubrication For Smooth Operation
    • Remanufactured In Our Chicago IL Facility
  • Autospecialty Calipers by PowerStop (Sold Individually) bolt directly in place of the stock calipers. Autospecialty brake calipers and the brackets are remanufactured in our Chicago, IL facility. Autospecialty calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This ensures that every caliper is inspected for quality and safety. These calipers are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. Autospecialty by PowerStop Stock Replacement Brake Calipers are perfect for the budget conscious consumer looking for complete stock replacement brake calipers!
Brand: Powerstop
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2010 - Mercury Mariner Front Left L 4 Cyl 2.5L 152 2488
Powerstop
2010 Mercury Mariner Disc Brake Caliper - Front Right 4 Cyl 2.5L Powerstop - Autospecialty By Power Stop Remanufactured Calipers w/Brackets

P311-4508FCA    L5277  New

Qty:
In Stock & Ready to Ship
$28.00 $50.53
Powerstop Disc Brake Caliper  Front Right
  • AS CALIPER W/BRKT
  • Bracket Included~Phenolic Pistons
  • DIRECT REPLACEMENT CALIPER
  • Autospecialty By Power Stop Remanufactured Calipers w/Brackets
  • Product Attributes:
    • Abutment Clips Included: No
    • Anti-Rattle Spring Included: Yes
    • Bleeder Screw Included: Yes
    • Bleeder Screw Thread Diameter: 0.375 In.
    • Bleeder Screw Thread Size: 3/8 X 24
    • Bleeder Screw Threads Per Inch: 24 In.
    • Brake Pads Included: No
    • Caliper Casting Material: Cast Iron
    • Caliper Color: Gray
    • Caliper Piston Material: Phenolic
    • Caliper Piston Quantity: 1
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Grade Type: Regular
    • Inlet Fitting Type: Hard Line
    • Inlet Thread Diameter: 0.375 In.
    • Inlet Thread Size: 3/8 X 24 In.
    • Mounting Bolt Included: No
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: No
    • Mounting Hole Diameter: 14.00mm
    • Pad Wear Sensor Included: No
    • Piston Diameter: 66.04mm
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: This Product Can Expose You To Chemicals Including Lead; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The State
      • Warning: This Product Can Expose You To Chemicals Including Lead; Chromium [hexavalent Compounds]; Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium [hexavalent Compounds] Which Are Known To The State
  • Features:
    • 100 Percent Pressure Tested To Prevent Leaks
    • Brand New Components
    • Includes Seals/boots/bleeder Screws/Hardware/Pins
    • High Temperature EPDM Rubber For Extended Life
    • Premium Silicone Lubrication For Smooth Operation
    • Remanufactured In Our Chicago IL Facility
  • Autospecialty Calipers by PowerStop (Sold Individually) bolt directly in place of the stock calipers. Autospecialty brake calipers and the brackets are remanufactured in our Chicago, IL facility. Autospecialty calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This ensures that every caliper is inspected for quality and safety. These calipers are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. Autospecialty by PowerStop Stock Replacement Brake Calipers are perfect for the budget conscious consumer looking for complete stock replacement brake calipers!
Brand: Powerstop
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2010 - Mercury Mariner Front Right L 4 Cyl 2.5L 152 2488
Powerstop
2010 Mercury Mariner Disc Brake Caliper - Front Left 4 Cyl 2.5L Powerstop - Autospecialty By Power Stop Remanufactured Calipers w/Brackets

P311-427F0A2    L3116  New

Qty:
In Stock & Ready to Ship
$32.00 $53.90
Powerstop Disc Brake Caliper  Front Left
  • AS CALIPER W/BRKT
  • Bracket Included~Steel Piston
  • DIRECT REPLACEMENT CALIPER
  • Autospecialty By Power Stop Remanufactured Calipers w/Brackets
  • Product Attributes:
    • Abutment Clips Included: No
    • Anti-Rattle Spring Included: Yes
    • Bleeder Screw Included: Yes
    • Bleeder Screw Thread Diameter: 0.375 In.
    • Bleeder Screw Thread Pitch: 0.375 In.
    • Bleeder Screw Thread Size: 3/8 X 24
    • Brake Pads Included: No
    • Caliper Casting Material: Cast Iron
    • Caliper Color: Gray
    • Caliper Piston Material: Steel
    • Caliper Piston Quantity: 1
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Grade Type: Regular
    • Inlet Fitting Type: Hard Line
    • Inlet Thread Diameter: 10.00mm
    • Inlet Thread Pitch: 1.00mm
    • Inlet Thread Size: M10 X 1.0
    • Mounting Bolt Included: No
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: No
    • Pad Wear Sensor Included: No
    • Piston Diameter: 66.00mm
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: This Product Can Expose You To Chemicals Including Lead; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The State
      • Warning: This Product Can Expose You To Chemicals Including Lead; Chromium [hexavalent Compounds]; Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium [hexavalent Compounds] Which Are Known To The State
  • Features:
    • 100 Percent Pressure Tested To Prevent Leaks
    • Brand New Components
    • Includes Seals/boots/bleeder Screws/Hardware/Pins
    • High Temperature EPDM Rubber For Extended Life
    • Premium Silicone Lubrication For Smooth Operation
    • Remanufactured In Our Chicago IL Facility
  • Autospecialty Calipers by PowerStop (Sold Individually) bolt directly in place of the stock calipers. Autospecialty brake calipers and the brackets are remanufactured in our Chicago, IL facility. Autospecialty calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This ensures that every caliper is inspected for quality and safety. These calipers are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. Autospecialty by PowerStop Stock Replacement Brake Calipers are perfect for the budget conscious consumer looking for complete stock replacement brake calipers!
Brand: Powerstop
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2010 - Mercury Mariner Front Left L 4 Cyl 2.5L 152 2488

Showing 1 - 10 of 48 Products for Disc Brake Caliper.