Shop By Brand

The Following brands are available based on your search.

  • Design Engineering
    Design Engineering
  • Genuine
    Genuine
  • Heatshield Products
    Heatshield Products
  • Original Equipment
    Original Equipment
  • Thermo-Tec
    Thermo-Tec

Showing Products For 2010 Hyundai Veracruz Starter Heat Shield

Below are all the different brands and applications for 2010 Hyundai Veracruz Starter Heat Shield

Showing 1 - 7 of 7 Products for Starter Heat Shield.

Refine Your Search

Genuine
2010 Hyundai Veracruz Starter Heat Shield Genuine

P311-0CC7547    W0133-2764041  New

Qty:
In Stock & Ready to Ship
$47.30
Genuine Starter Heat Shield
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Genuine
Additional Fitment Information:
Vehicle
2010 - Hyundai Veracruz
Original Equipment
2010 Hyundai Veracruz Starter Heat Shield Original Equipment

P311-5D95AE2    W0133-2764041  New

Qty:
In Stock & Ready to Ship
$23.43
Original Equipment Starter Heat Shield
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Original Equipment
Additional Fitment Information:
Vehicle
2010 - Hyundai Veracruz
Thermo-Tec
Starter Heat Shield Thermo-Tec

P311-147A439    14150  New

Qty:
In Stock & Ready to Ship
$38.83
Thermo-Tec Starter Heat Shield
  • Starter Heat Shield
  • Starter Heat Shield; Universal Fit; 7 in. x 22 in.;
  • Features:
    • Eliminates Starter Problems
    • Universal To Fit Any Starter
    • Easy To Install
    • Insulates Starter And Solenoid
    • Protects By Reflecting 90 Percent Of Radiant Heat
  • In todays high-heat environment, starters take in a lot of damaging heat that destroys the windings of the starter and solenoid. To combat this problem, Thermo-Tec created a non-conductive strap-on heat shield with a highly-reflective mylar surface. The Starter Heat Shield will reflect over 90-percent of radiant heat up to 2000-deg F, adding life to the starter and assuring reliable starts. No more of those frustrating temporary starter failures. The Starter Heat Shield is a universal kit that fits all starters.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle
Heatshield Products
Starter Heat Shield Heatshield Products

P311-1F32CD5    501000  New

Qty:
In Stock & Ready to Ship
$67.97
Heatshield Products Starter Heat Shield
  • Prevents starter lock up, Prolongs starters life, Easy to install
  • Starter heat shields help prevent starter failure caused by overheating. Quality construction and design allow for easy installation, simply wrap the heat shield around the starter and fasten with the hook and loop fasteners.
  • Product Attributes:
    • Add On: 3510,3510ms,9200,12617229
    • Install Tips: Velcro
    • Installation Tip: Velcro
    • Instructions Included:
      • N
      • No
    • Insulation Type:
      • Product Can Be Used As A Radiant Heat Barrier Or Placed Directly On Heat Source.
      • Radiant Heat Barrier, Needs 1 Inch Of Air Space, Should Not Contact Heat Source.
    • Item Related HPI SKUs: 501070, 177004, 372050, 282020
    • Operating Temperature: 1100f
    • Peak Temperature: 2000f
    • Product Dimensions: 7-3/4 X 21-3/4 In
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
    • Safety Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Rated for 11F continuous use, 2F intermittent.
    • Prevents starter heat soak so you are not stranded
    • Easy installation, starter removal is not necessary
  • HP Starter Heat Shields, pro-long your starter's life and improve its performance! Our starter heat shields help prevent starter failure caused by overheating. Using a heat shield for the solenoid and starter can prevent the starter from having starter heat lock. Quality construction and design allow for easy installation. Two different sizes are available; therefore, trimming is not necessary. Our heavy-duty starter shield is recommended in situations where there is less than 1inch of air space between the starter heat shield and the heat source. Investing a little now can save you time and money in the future! Simply wrap the heat shield cover around the starter and fasten with the hook and loop fasteners; starter removal is not necessary in most cases.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle
Heatshield Products
Starter Heat Shield Heatshield Products

P311-2CBD76A    501010  New

Qty:
In Stock & Ready to Ship
$58.63
Heatshield Products Starter Heat Shield
  • Prevents starter lock up, Prolongs starters life, Easy to install
  • Starter heat shields help prevent starter failure caused by overheating. Quality construction and design allow for easy installation, simply wrap the heat shield around the starter and fasten with the hook and loop fasteners.
  • Product Attributes:
    • Add On: 9100,9000,9509,9063,9526,9612,9400,9606,9112,9162,9103,9503,9300,9605,5095,9051,9109,9500,9600,ts400,ts400dp,ts500,ts408,9532
    • Install Tips: Velcro
    • Installation Tip: Velcro
    • Instructions Included:
      • N
      • No
    • Insulation Type:
      • Product Can Be Used As A Radiant Heat Barrier Or Placed Directly On Heat Source.
      • Radiant Heat Barrier, Needs 1 Inch Of Air Space, Should Not Contact Heat Source.
    • Item Related HPI SKUs: 501071, 177004, 372050, 282020
    • Operating Temperature: 1100f
    • Peak Temperature: 2000f
    • Product Dimensions: 3-1/2 X 18 In
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
    • Safety Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Rated for 11F continuous use, 2F intermittent.
    • Prevents starter heat soak so you are not stranded
    • Easy installation, starter removal is not necessary
  • HP Starter Heat Shields, pro-long your starter's life and improve its performance! Our starter heat shields help prevent starter failure caused by overheating. Using a heat shield for the solenoid and starter can prevent the starter from having starter heat lock. Quality construction and design allow for easy installation. Two different sizes are available; therefore, trimming is not necessary. Our heavy-duty starter shield is recommended in situations where there is less than 1inch of air space between the starter heat shield and the heat source. Investing a little now can save you time and money in the future! Simply wrap the heat shield cover around the starter and fasten with the hook and loop fasteners; starter removal is not necessary in most cases.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle
Design Engineering
Starter Heat Shield Design Engineering

P311-5866CB1    10236  New

Qty:
In Stock & Ready to Ship
$93.68
Design Engineering Starter Heat Shield
  • Onyx™ Starter Shield
  • Onyx™ Starter Shield; 7 in. x 24 in. Size;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • Dual Layer Design
    • 7 in. x 24 in. Size
    • Length Can Be Trimmed To Size
    • Hook And Loop Fastening System
    • Protects Up To 1350 Degrees F
    • Black Onxy Color
  • Designed for severe duty use, ONYX(TM) Starter Shield offers the highest level of protection for starters from potential failure caused by under hood heat soak conditions. Constructed of two layers of material, a highly reflective outer layer combined with a high heat inner layer. Able to withstand direct heat of up to 1350F, ONYX(TM) Starter Shield is the perfect choice for high heat applications where engine heat soak is a problem. 7 in.W x 24 in.L Size Hook & loop fastening system Length can be trimmed to size

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle
Heatshield Products
Starter Heat Shield Heatshield Products

P311-1E186B5    501070  New

Qty:
In Stock & Ready to Ship
$70.55
Heatshield Products Starter Heat Shield
  • Lava rock fiber, Prevent starter lock up, Prolongs starter life, Easy to install
  • Lava Starter Shield is easy to install and typically doesn't require starter removal. Using heat-resistant and durable hook and loop fasteners. Protects the starter from constant temperatures as high as 12F, and short-term temps 2,F.
  • Product Attributes:
    • Add On: 3510,3510ms,9200,12617229
    • Install Tips: Velcro
    • Installation Tip: Velcro
    • Instructions Included:
      • N
      • No
    • Insulation Type:
      • Product Can Be Placed In Direct Contact With Heat Source.
      • Product Can Be Used As A Radiant Heat Barrier Or Placed Directly On Heat Source Up To 1200f
    • Item Related HPI SKUs: 177004, 372050, 282020, 501000
    • Operating Temperature: 1200f
    • Peak Temperature: 2000f
    • Product Dimensions: 7-1/4 X 21-3/4 In
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
    • Safety Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Patented Heatshield thermal barrier technology withstands constant temps up to 1,2 degrees Fahrenheit and short-term exposure to 2, degrees
    • Protects starter motor and solenoid from damaging heat
    • Installs in minutes, typically without requiring starter removal
    • Naturally water, chemical and acid resistant
  • Heat-cooked starter motors and starter solenoids are a thing of the past, thanks to the Heatshield Products Lava Starter Shield. Specially engineered to protect these electric components that are mounted in the hottest part of the engine bay, Lava Starter Shield is made using Heatshield Products patented and proven crushed volcanic rock fiber. This is an ideal thermal barrier when there is less than 1-inch of airspace between the starter and heat sources such as headers, and also works great when there is more airspace. Lava Starter Shield has a cool, carbon-fiber appearance, and it does not conduct electricity, unlike nearly all competitive thermal barriers. That means that you don't have to worry about an electrical short that could occur with exposed starter terminals coming in contact with the shield. Protecting the starter motor and solenoid from excessive heat will extend the life of these products, improve starter cranking performance when hot and reduce electrical amp draw while starting under hot conditions. Lava Starter Shield protects the starter from constant temperatures as high as 1,2 degrees Fahrenheit, and short-term temps as high as 2, degrees. Lava Starter Shield is easy to install and typically doesn't require starter removal. Using heat-resistant and durable hook and loop fasteners, Lava Starter Shield is wrapped securely around the starter and won't come off while subjected to engine and driving vibrations. This allows for easy removal, though, when necessary for engine servicing. Made in the USA, Lava Starter Shield is the best way to protect the starter motor and solenoid from damaging heat, preventing costly and inconvenient starter failures from ruining your day.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle

Showing 1 - 7 of 7 Products for Starter Heat Shield.