Finish Selecting Your Vehicle

Choose your Engine for your 2010 Cadillac CTS

  • 8 Cyl 6.2L

Shop By Brand

The Following brands are available based on your search.

  • Cometic Gasket
    Cometic Gasket
  • Hedman
    Hedman
  • Hooker
    Hooker
  • JBA Racing Headers
    JBA Racing Headers
  • Mr Gasket
    Mr Gasket
  • Proform
    Proform
  • Remflex Exhaust Gaskets
    Remflex Exhaust Gaskets

Showing Products For 2010 Cadillac CTS Exhaust Header Gasket

Below are all the different brands and applications for 2010 Cadillac CTS Exhaust Header Gasket

Showing 1 - 10 of 29 Products for Exhaust Header Gasket.

Refine Your Search

Mr Gasket
2010 Cadillac CTS Exhaust Header Gasket 8 Cyl 6.2L Mr Gasket - Exhaust Header Gasket

P311-0DFBB8E    4805G  New

Qty:
In Stock & Ready to Ship
$59.73
Mr Gasket Exhaust Header Gasket
  • Round Ports; 1.75 in.; Multi-Layer Stainless Steel
  • Exhaust Header Gasket; Round Ports; 1.75 in.; Multi-Layer Stainless Steel;
  • Exhaust Header Gasket
  • Product Attributes:
    • Collector Gaskets Included: No
    • Engine Make/Size: Gm Small Block Gen Iii/iv (ls Based)
    • Gasket Line: Mls
    • Item Weight: 1.000 Lbs.
    • Port Shape: Round
    • Port Size: 1.750 In.
    • Thickness: 0.072 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Multi Layer Stainless Steel 3-Layers
    • Round Port 1.75 in. Diameter
    • Will Not Deteriorate From Scrubbing Action
    • Thickness 0.072 in.
  • Multi-Layered Steel (MLS) exhaust and header collector gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle Block Engine CID CC
2010 - Cadillac CTS V 8 Cyl 6.2L 376 6162
Mr Gasket
2010 Cadillac CTS Exhaust Header Gasket 8 Cyl 6.2L Mr Gasket - Exhaust Header Gasket

P311-0DFBB8E    4805G  New

Qty:
In Stock & Ready to Ship
$59.73
Mr Gasket Exhaust Header Gasket
  • Round Ports; 1.75 in.; Multi-Layer Stainless Steel
  • Exhaust Header Gasket; Round Ports; 1.75 in.; Multi-Layer Stainless Steel;
  • Exhaust Header Gasket
  • Product Attributes:
    • Collector Gaskets Included: No
    • Engine Make/Size: Gm Small Block Gen Iii/iv (ls Based)
    • Gasket Line: Mls
    • Item Weight: 1.000 Lbs.
    • Port Shape: Round
    • Port Size: 1.750 In.
    • Thickness: 0.072 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Multi Layer Stainless Steel 3-Layers
    • Round Port 1.75 in. Diameter
    • Will Not Deteriorate From Scrubbing Action
    • Thickness 0.072 in.
  • Multi-Layered Steel (MLS) exhaust and header collector gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle Block Engine CID CC
2010 - Cadillac CTS V 8 Cyl 6.2L 376 6162
Proform
Exhaust Header Gasket Proform

P311-2280496    67921  New

Qty:
In Stock & Ready to Ship
$39.22
Proform Exhaust Header Gasket
  • Engine Header Gasket Set; Small Block Chevy; Square Port; Aluminum Material;Pair
  • Engine Header Gasket Set; Fits Small Block Chevy Engines With Square Exhaust Ports; Made From Soft Conforming Aluminum Material; Easily Mates and Conforms To The Surface Of Exhaust Headers To Provide a Great Seal Each Time; Sold As One Pair
  • Product Attributes:
    • Category: Header Gasket
    • Feature/Benefit: Proform's Soft Conforming Aluminum Gaskets Easily Conform To The Header Flanges For A Superior Seal.
    • Make: Chevrolet
    • Part Type: Header Gasket
    • Style: Square Port
    • Tool Type: Piston Installation Tools
  • PROFORM's soft conforming aluminum gaskets easily conform to the header flanges for a superior seal. Durable, theft-resistent clamshell packaging. Each kit comes with 2 gaskets.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Remflex Exhaust Gaskets
Exhaust Header Gasket Remflex Exhaust Gaskets

P311-1C2434E    3036  New

Qty:
In Stock & Ready to Ship
$42.39
  • Exhaust Gasket-FORD V8, SOHC Hemi, 427 Cammer
  • V8 - SOHC, Hemi 427 "Cammer" ('67-'69), 1-7/8" x 1-23/32" D-Shaped Port, 2/Set
  • Product Attributes:
    • Prop 65 - Short Label: Prop65_warning.jpg
    • Prop 65 (C, R or CR): Cr
    • Title: Remflex Exhaust Gasket
  • Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Remflex Exhaust Gaskets
Additional Fitment Information:
Vehicle
Remflex Exhaust Gaskets
Exhaust Header Gasket Remflex Exhaust Gaskets

P311-25E7778    38-001  New

Qty:
In Stock & Ready to Ship
$45.19
  • Exhaust Gasket-KEN VENEY CYLINDER HEADS
  • KEN VENEY CYLINDER HEADS - Top Fuel / Alcohol, Exhaust Header Gasket, 2/Set
  • Product Attributes:
    • Prop 65 - Short Label: Prop65_warning.jpg
    • Prop 65 (C, R or CR): Cr
    • Title: Remflex Exhaust Gasket
  • Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Remflex Exhaust Gaskets
Additional Fitment Information:
Vehicle
Cometic Gasket
Exhaust Header Gasket Cometic Gasket

P311-0AF575E    C5420  New

Qty:
In Stock & Ready to Ship
$36.64
  • Chevrolet Gen-1 Small Block V8 Exhaust Header Gasket
  • Chevrolet Gen-1 Small Block V8 .064in. AM Exhaust Header Gasket; Brodix BD2000 Head
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Designed For Extreme Cylinder Pressures
    • Maintains A Torque Set
    • Resists Corrosion
    • Will Not Burn Through Or Push Out
    • No Sealants Are Required
  • Cometic Gasket Inc. Exhaust Gaskets are designed to be used with manifolds or headers. Offered in a range of materials to make sure you are covered with any cylinder head and manifold/header combination. All exhaust gaskets are designed to be used without the use of messy sealants.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Hedman
Exhaust Header Gasket Hedman

P311-07DE2EA    27470  New

Qty:
In Stock & Ready to Ship
$25.25
Hedman Exhaust Header Gasket
  • Header Flange Gaskets for CHEVY / GMC 4.8, 5.3, 6.0L V8
  • HEADER FLANGE Gaskets for CHEVY / GMC 4.8, 5.3, 6.0L V8
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Contents: One Pair Of Header Flange Gaskets.
    • Description: Chevy / Gmc 4.8, 5.3, 6.0l V8
    • Engine: Chevy Ls Series
    • Gasket Material: Composite Steel Shim
    • Gasket Thickness: 0.0625 In.
    • Installation Hardware Included: No
    • Notes: Hedder Flange Gaskets For Chevy / Gmc 4.8, 5.3, 6.0l V8
    • Package Contents: One Pair Of Header Flange Gaskets.
    • Port Shape: Round
    • Port Size: 1-1/2 In.
    • Port Style: Round
    • Product Info: Hedman Replacement Hedder Flange Gasket For Chevy, Gmc Vortec V8 4.8, 5.3, 6.0l
    • Title: Hedman Hedders Hedder Flange Gaskets For Chevy / Gmc 4.8, 5.3, 6.0l V8
  • Features:
    • Same, High-Quality Header Flange Gaskets Supplied With New Hedman Hedders
    • Steel Core, Laminated Construction
    • Made In The USA!
    • Sold In Pairs

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hedman
Additional Fitment Information:
Vehicle
Hedman
Exhaust Header Gasket Hedman

P311-173B8FA    27490  New

Qty:
In Stock & Ready to Ship
$25.40
Hedman Exhaust Header Gasket
  • Header Flange Gaskets for DODGE Hemi 5.7 Liter
  • HEADER FLANGE Gaskets for DODGE Hemi 5.7 Liter
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Contents: One Pair Of Header Flange Gaskets.
    • Description: Dodge Hemi 5.7 Liter
    • Engine: Mopar Hemi 5.7l
    • Gasket Material: Composite Steel Shim
    • Gasket Thickness: 0.0625 In.
    • Installation Hardware Included: No
    • Notes: Hedder Flange Gaskets For Dodge Hemi 5.7 Liter
    • Package Contents: One Pair Of Header Flange Gaskets.
    • Port Shape: Square
    • Port Style: Square
    • Product Info: Fits 5.7l Hemi Engines
    • Special Engine Notes: Hemi
    • Title: Hedman Hedders Hedder Flange Gaskets For Dodge Hemi 5.7 Liter
  • Features:
    • Same, High-Quality Header Flange Gaskets Supplied With New Hedman Hedders
    • Steel Core, Laminated Construction
    • Made In The USA!
    • Sold In Pairs

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hedman
Additional Fitment Information:
Vehicle
Hedman
Exhaust Header Gasket Hedman

P311-304A763    27500  New

Qty:
In Stock & Ready to Ship
$25.02
Hedman Exhaust Header Gasket
  • Header Flange Gaskets for CHEVY 283-400
  • HEADER FLANGE Gaskets for CHEVY 283-400
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Contents: One Pair Of Header Flange Gaskets.
    • Description: Chevy 283-400
    • Engine: Chevy Sb 283-400
    • Gasket Material: Composite Steel Shim
    • Gasket Thickness: 0.0625 In.
    • Notes: Hedder Flange Gaskets For Chevy 283-400
    • Package Contents: One Pair Of Header Flange Gaskets.
    • Port Shape: Round
    • Port Style: Round
    • Product Info: Hedman Replacement Hedder Flange Gasket For Chevy 283-400 Round Port
    • Special Engine Notes: Round Port
    • Title: Hedman Hedders Hedder Flange Gaskets For Chevy 283-400
  • Features:
    • Same, High-Quality Header Flange Gaskets Supplied With New Hedman Hedders
    • Steel Core, Laminated Construction
    • Made In The USA!
    • Sold In Pairs

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hedman
Additional Fitment Information:
Vehicle
Hedman
Exhaust Header Gasket Hedman

P311-550471C    27700  New

Qty:
In Stock & Ready to Ship
$26.39
Hedman Exhaust Header Gasket
  • Header Flange Gaskets for FORD 289-351W
  • HEADER FLANGE Gaskets for FORD 289-351W
  • Product Attributes:
    • California Proposition 65: Warning: Cancer. For More Info Visit Www.p65warnings.ca.gov
    • Contents: One Pair Of Header Flange Gaskets.
    • Description: Ford 289-351w
    • Gasket Material: Composite Steel Shim
    • Gasket Thickness: 0.0625 In.
    • Installation Hardware Included: No
    • Notes: Hedder Flange Gaskets For Ford 289-351w
    • Package Contents: One Pair Of Header Flange Gaskets.
    • Port Shape: Oval
    • Port Style: Oval
    • Product Info: Hedman Replacement Hedder Flange Gasket For Ford 289-351w (oval Port)
    • Special Engine Notes: 351 Windsor Oval Port
    • Title: Hedman Hedders Hedder Flange Gaskets For Ford 289-351w
  • Features:
    • Same, High-Quality Header Flange Gaskets Supplied With New Hedman Hedders
    • Steel Core, Laminated Construction
    • Made In The USA!
    • Sold In Pairs

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Hedman
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 29 Products for Exhaust Header Gasket.