Finish Selecting Your Vehicle

Choose your Engine for your 2009 Volkswagen Rabbit

  • 5 Cyl 2.5L

Shop By Brand

The Following brands are available based on your search.

  • AutoBest
    AutoBest
  • Bosch
    Bosch
  • Carter
    Carter
  • Delphi
    Delphi
  • Hella
    Hella
  • Holley
    Holley
  • URO Parts
    URO Parts
  • VDO
    VDO

Showing Products For 2009 Volkswagen Rabbit Fuel Pump Module Assembly

Below are all the different brands and applications for 2009 Volkswagen Rabbit Fuel Pump Module Assembly

Showing 1 - 10 of 25 Products for Fuel Pump Module Assembly.

Refine Your Search

Delphi
2009 Volkswagen Rabbit Fuel Pump Module Assembly 5 Cyl 2.5L Delphi

P311-0BCC0E3    FG1273  New

152-1011 , 1K0 919 051 BG , 1K0 919 051 CK , 1K0 919 051 DA , 1K0 919 673 AF , 1K0919051BG , 1K0919051CK , 1K0919051DA , 69944 , A30426 , CFG1273 , E8831M , P76694M , SP5021M , SP5094M

Qty:
In Stock & Ready to Ship
$178.93
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Flow Rating: 29
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 87.0
    • Outlet Outside Diameter: 0.313
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: No
    • Resistance Ohms Empty: 52.0
    • Resistance Ohms Full: 292.0
    • Strainer Included: Yes
    • System Pressure: 51 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 5
    • Terminal Type: Blade
    • Vapor Pressure Sensor: No
    • Voltage: 12.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Block Engine CID CC
2009 - Volkswagen Rabbit L 5 Cyl 2.5L 151 2480
AutoBest
2009 Volkswagen Rabbit Fuel Pump Module Assembly 5 Cyl 2.5L AutoBest

P311-33799F2    F4842A  New

Qty:
In Stock & Ready to Ship
$105.89
AutoBest Fuel Pump Module Assembly
  • Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir and Fuel Strainer
  • Product Attributes:
    • Inlet Diameter: 0.433
    • Outlet Diameter: 5/16
Brand: AutoBest
Additional Fitment Information:
Vehicle Block Engine CID CC
2009 - Volkswagen Rabbit L 5 Cyl 2.5L 151 2480
Carter
2009 Volkswagen Rabbit Fuel Pump Module Assembly 5 Cyl 2.5L Carter

P311-1898B75    P76694M  New

1234948 , 1K0 919 051 BG , 1K0 919 051 CK , 1K0 919 051 DA , 1K0 919 051 M , 2920654 , 580-2100 , 69944 , A2C53430670Z , A30426 , B18112084TG , C-0692-M , C0692M , E8831M , FG1273 , M2496397 , M2496398 , SP5094M , USEP8831M

Qty:
In Stock & Ready to Ship
$164.90
Carter Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Product Attributes:
    • Connector Color: White
    • Connector Gender: Female
    • Connector Shape: Oval
    • Fuel Filter Included: No
    • Grade Type: Regular
    • Minimum Flow Rating: 17
    • Minimum Pressure: 87.0
    • Mounting Hardware Included: No
    • Pump Type: Electric
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Quantity: 5
    • Terminal Type: Blade
    • Top Mount Diameter: 136.0
    • Wire Harness Included: No
    • Wire Quantity: 5
    • Wiring Harness Length: 300.0
  • The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
Brand: Carter
Additional Fitment Information:
Vehicle Block Engine CID CC
2009 - Volkswagen Rabbit L 5 Cyl 2.5L 151 2480
Bosch
2009 Volkswagen Rabbit Fuel Pump Module Assembly 5 Cyl 2.5L Bosch - Fuel Pump Module Assembly (New)

P311-5765D5A    69944  New

1K0919051AP , 1K0919051BE , 1K0919051DA

Qty:
In Stock & Ready to Ship
$142.80
  • Bosch Fuel Pump Module Assembly
  • Fuel Pump Module Assembly (New)
  • Product Attributes:
    • Cases Per Pallet (ORLY): 75
    • Electric Or Mechanical: Electric
    • Gaskets Included (Fuel Pump): No
    • In-Line Pump: N
    • Mounting Hardware Included: No
    • Negative Ground: No
    • Package Contents: 1 Module Assembly
    • Prefiltro usado con bomba: Yes
    • Prop 65 Warning Label Required?: No
    • Pump Only Or Module: Module
  • Features:
    • Bosch "Better than OE design", improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
    • Bosch Aftermarket Fuel Assemblies are built and tested to the same rigorous quality standards as our OE fuel pumps to ensure a long, reliable service life
    • Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
    • Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
    • All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.
  • Nuestro equipo de ingenieros de Bosch lleva los beneficios de las bombas de combustible premium al mercado de repuestos automotrices. Las bombas de combustible Bosch se fabrican en las mismas líneas de producción y luego se fabrican y luego se prueban con los mismos estándares de calidad rigurosos que las bombas de combustible Bosch de equipo original para garantizar una vida útil prolongada y confiable. Haga el trabajo bien la primera vez, siempre, con las bombas de combustible Bosch Premium.
Brand: Bosch
Additional Fitment Information:
Vehicle Block Engine CID CC
2009 - Volkswagen Rabbit L 5 Cyl 2.5L 151 2480
URO Parts
2009 Volkswagen Rabbit Fuel Pump Module Assembly URO Parts

P311-5895DA2    1K0919051CK  New

1009190071 , 123 54034 076 , 123 54034 500 , 1K0 919 051 DA , 1K0 919 051BG , 1K0 919 051CK , 1K0919051CK , 22 82 3 507 0001Z , 228235070001Z , SP5094M , URO-010619

Qty:
In Stock & Ready to Ship
$120.03
URO Parts Fuel Pump Module Assembly
  • Fuel Pump Assembly
  • Includes sending unit; Tank seal is serviced separately
    • Guaranteed fitment
    • Efficient impeller design maximizes fuel flow while minimizing current draw
    • Precision armature bearings for quiet operation and reduced vibration
    • Low-resistance motor brushes for durability and efficiency
    • Durable high-quality housing materials
    • Factory tested for proper operation
    • 24 Month Unlimited Mileage Warranty
Brand: URO Parts
Additional Fitment Information:
Vehicle
2009 - Volkswagen Rabbit
Hella
2009 Volkswagen Rabbit Fuel Pump Module Assembly 5 Cyl 2.5L Hella

P311-314E5D9    7.05656.06.0  New

0 986 580 940 , 100 919 0071 , 100 919 0082 , 1K0 919 051AE , 1K0 919 051AM , 1K0 919 051AP , 1K0 919 051AQ , 1K0 919 051BE , 1K0 919 051BG , 1K0 919 051BH , 1K0 919 051CH , 1K0 919 051CJ , 1K0 919 051CK , 1K0 919 051CL , 1K0 919 051DA , 1K0 919 051DB , 1K0 919 051M , 1K0 919 051N , 1K0919051AE , 1K0919051AM , 1K0919051AP , 1K0919051AQ , 1K0919051BE , 1K0919051BG , 1K0919051BH , 1K0919051CH , 1K0919051CJ , 1K0919051CK , 1K0919051CL , 1K0919051DA , 1K0919051DB , 1K0919051M , 1K0919051N , 1KD 919 051A , 1KD 919 051F , 1KD919051A , 1KD919051F , 228-235-070-001Z , 228-235-070-002Z , 22865 , 22897 , 77007 , 77017 , 77041 , 775299 , 775336 , A2C53438283Z , BSP22727 , E8671M , E8831M , FDB1647 , V10-09-0842 , V10-09-0852 , V10-09-1236

Qty:
In Stock & Ready to Ship
$170.78
  • PR Code : 1A1, 1A5 with OE No. 1K0919051BH, 1K0919051CK
Brand: Hella
Additional Fitment Information:
Vehicle Block Engine CID CC
2009 - Volkswagen Rabbit L 5 Cyl 2.5L 151 2480
Holley
Fuel Pump Module Assembly Holley

P311-4F329F4    19-365  New

Qty:
In Stock & Ready to Ship
$367.39
Holley Fuel Pump Module Assembly
  • Sniper Diecast Retrofit Carbureted Fuel Pump
  • Sniper Diecast Retrofit Carbureted Fuel Pump; Returnless System; Supports Up To 900 Carb HP at 6 PSI; 13.5 Volts; 10.4 AMP Draw;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • The Easiest Way To Convert Your Vehicle To An In-tank Fuel System
    • Installs In Any Fuel Tank From 7 In. To 12 In. Deep
    • To Fit A Wide Variety Of Applications
    • The Low Profile Design Is Only 1.275 In. Thick
    • Above The Tank Mounting Surface For Added Clearance When Needed
    • The Innovative Clamping System Allows You
    • To Locate The Module Anywhere In The Tank Beside
    • Your Existing Sending Unit
    • The Clamping System Allows You
    • To Rotate The Unit 360 Degrees For Easier Clocking
    • Of The Plumbing And Wiring Locations Under Your Ride
    • Die Cast Aluminum Construction
  • External electric fuel pumps have been the performance standard for decades. They continue to perform well, however, the evolution of fuel pump technology has surpassed them in quiet operation and fuel delivery capabilities that an in-tank module can deliver. Looking ahead to the future, Sniper has designed their latest retrofit pump module especially for the carbureted applications. The module design is very similar to the existing EFI pump modules using a 340 LPH pump, but includes a built-in regulator for lower fuel pressure that carburetor applications require. Now you can convert your factory tank or fuel cell to an in-tank fuel system quickly and easily! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a die cast pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! An added bonus is that you can upgrade this module if you eventually change to an EFI system by changing the internal regulator. Supports up to 900 Carb HP (@ 6 PSI at 13.5 Volts / 10.4 AMP Draw) of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-103AF31    19-350  New

Qty:
In Stock & Ready to Ship
$465.68
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 340 LPH; Install In Any Tank From 7 in. to 12 in. Deep;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • The Easiest Way To Convert Your Vehicle To An In-tank EFI Fuel System
    • Installs In Any Fuel Tank From 7 in. To 12 in. Deep To Fit A Wide Variety Of Applications
    • The Low Profile 5 Inch Diameter Design Is Only 1.275 Inches Thick Above The Tank Mounting Surface
    • The Innovative Clamping System Allows You To Locate The Module Anywhere In The Tank
    • Clamping System Allows You To Rotate The Unit 360 Degrees For Easier Clocking Of The Plumbing
    • Die Cast Aluminum Construction For Corrosion Resistance And Long Lasting Good Looks
  • Holley/MSD is pleased to announce the release of Sniper Diecast Retrofit Fuel Pump Modules, which support up to 700 EFI horsepower or 900 carbureted horsepower and make it easy to affordably upgrade to EFI. Available in return and returnless versions, they convert your factory tank or fuel cell to an in-tank EFI fuel system. They're easy to install with basic hand tools and require no welding or fabrication whatsoever. Sniper Diecast Retrofit Fuel Pump Modules include a diecast pump-hanger bracket to control pump vibration in a low-profile design thats perfect wherever space is at a premium. They fit any fuel-tank depth from 7 to 12 inches and protrude only 1.275-inch above the tank-mounting surface to accommodate numerous applications. You can locate the 5 inch diameter module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power-source/ground and fuel lines. Supports up to 700 EFI or 900 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-45DB8B4    12-173  New

Qty:
In Stock & Ready to Ship
$827.99
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 450 LPH; Return Style; Install In Any Tank From 7 in. To 12 in. Deep; Includes Filter Socks;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Billet/Anodized/Laser Etched Flanges With 8An ORB Return/Outlet And 6An Orb Vent
    • Allows You To Locate The Module Nearly Anywhere In The Tank While Retaining
    • The Clamping System Allows You To Rotate The Unit 360 Degrees For Easier Clocking Of The Plumbing And Wiring
    • Easy Install Just Drill A 4 in. Hole In The Top Of The Tank Then Use Hand Tools
    • E85 Compatible
    • The Dual Pump Design Allows The Pumps To Be Ran Together Or The Second Pump Can Be Triggered Additionally
    • Units Install In Tanks From 7 To 12 in. Deep
    • Filter Socks Included/Hydramats Can Be Purchased Separately
  • Looking to make a serious step up in the horsepower department? The Holley Dual 450 LPH EFI Pump Module would be an excellent choice. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator.The innovative clamping system allows you to locate the module nearly anywhere in the tank while retaining your factory fuel level sending unit. The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-3FEFDF7    12-130  New

Qty:
In Stock & Ready to Ship
$883.52
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Install In Any Tank From 6.5 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 25 Products for Fuel Pump Module Assembly.