
P311-3649554 W0133-1638261 New
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- ; Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip. Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation.
- ***Updated PTFE Seal Lip Design, No Spring Located Behind Inner Sealing Lip, Proper Installation Instructions Included Must be Observed to Ensure Proper Seal and to Prevent Premature Failure. Installation Surface MUST be Clean and Completely Dry. DO NOT USE ANY OIL or GREASE on Sealing Surface. In order to ensure a secure seal, the motor should not be operated for at least 4 hours after installation so the PTFE sealing lip can be evenly positioned around the shaft being sealed***
- 47x10