Finish Selecting Your Vehicle

Choose your Submodel for your 2009 Mazda 3

  • GS
  • GT
  • GX
  • Mazdaspeed
  • S
  • i

Shop By Brand

The Following brands are available based on your search.

  • Autopart International
    Autopart International
  • BBB Industries
    BBB Industries
  • CARQUEST
    CARQUEST
  • Cardone
    Cardone
  • Centric
    Centric
  • Mando
    Mando
  • Pagid
    Pagid
  • Powerstop
    Powerstop
  • Raybestos
    Raybestos

Showing Products For 2009 Mazda 3 Disc Brake Caliper

Below are all the different brands and applications for 2009 Mazda 3 Disc Brake Caliper

Showing 1 - 10 of 73 Products for Disc Brake Caliper.

Refine Your Search

Centric
2009 Mazda 3 Disc Brake Caliper - Rear Left 4 Cyl 2.3L Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-4260382    141.45564  Remanufactured

Qty:
In Stock & Ready to Ship
$70.00 $61.18
Centric Disc Brake Caliper  Rear Left
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • 10x1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Casting Material: Aluminum
    • Caliper Color: Gray
    • Caliper Type: Floating
    • Casting Material: Aluminum
    • Friction Materials Standards Institute Pad Number: 10x.10950
    • Grade Type: Regular
    • Inlet Fitting Type: Open
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Mounting Hole Diameter: 10.000
    • Pads Included: No
    • Piston 1 Diameter: 38.000
    • Piston 2 Diameter: 38.000
    • Piston Material: Aluminum
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Left
Additional Fitment Information:
Vehicle Submodel Aspiration Position Block Engine CID CC
2009 - Mazda 3 Mazdaspeed Turbocharged Rear Left L 4 Cyl 2.3L - 2260
Cardone
2009 Mazda 3 Disc Brake Caliper - Rear Right 4 Cyl 2.0L Cardone - Unloaded Caliper w/Bracket

P311-2F566B6    19-B2955  Remanufactured

3M512M088BA , BPYK2661X , BPYK2661XB

Qty:
In Stock & Ready to Ship
$47.70 $70.57
Cardone Disc Brake Caliper  Rear Right
  • with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 37.8968
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2009 - Mazda 3 Rear Right L 4 Cyl 2.0L 122 1999
Cardone
2009 Mazda 3 Disc Brake Caliper - Rear Left 4 Cyl 2.0L Cardone - Unloaded Caliper w/Bracket

P311-2617876    19-B2954  Remanufactured

3M512M089BA , BPYK2671X , BPYK2671XB

Qty:
In Stock & Ready to Ship
$47.70 $70.57
Cardone Disc Brake Caliper  Rear Left
  • with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 37.8968
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2009 - Mazda 3 Rear Left L 4 Cyl 2.0L 122 2000
Centric
2009 Mazda 3 Disc Brake Caliper - Rear Right 4 Cyl 2.3L Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-4350FA7    141.45563  Remanufactured

Qty:
In Stock & Ready to Ship
$70.00 $61.18
Centric Disc Brake Caliper  Rear Right
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • 10x1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Casting Material: Aluminum
    • Caliper Color: Gray
    • Caliper Type: Floating
    • Casting Material: Aluminum
    • Friction Materials Standards Institute Pad Number: 10x.10950
    • Grade Type: Regular
    • Inlet Fitting Type: Open
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Mounting Hole Diameter: 10.000
    • Pads Included: No
    • Piston 1 Diameter: 38.000
    • Piston 2 Diameter: 38.000
    • Piston Material: Aluminum
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Right
Additional Fitment Information:
Vehicle Submodel Aspiration Position Block Engine CID CC
2009 - Mazda 3 Mazdaspeed Turbocharged Rear Right L 4 Cyl 2.3L - 2260
Cardone
2009 Mazda 3 Disc Brake Caliper - Rear Left 4 Cyl 2.0L Cardone - Unloaded Caliper

P311-08C200F    19-2954  Remanufactured

360004840 , 36000900 , 36000902 , 36001703 , 36001765 , 3M512M089BA , 8602911 , 86029110 , 8603735 , 86037350 , BPYK2671X , BPYK2671XA , BPYK2671XB

Qty:
In Stock & Ready to Ship
$47.70 $73.46
Cardone Disc Brake Caliper  Rear Left
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 37.8968
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2009 - Mazda 3 Rear Left L 4 Cyl 2.0L 122 2000
Centric
2009 Mazda 3 Disc Brake Caliper - Rear Right 4 Cyl 2.0L Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-09CDEA4    141.45535  Remanufactured

Qty:
In Stock & Ready to Ship
$75.00 $62.07
Centric Disc Brake Caliper  Rear Right
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.09730
    • Grade Type: Regular
    • Inlet Fitting Type: Open
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Pads Included: No
    • Piston 1 Diameter: 38.000
    • Piston 2 Diameter: 38.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2009 - Mazda 3 Rear Right L 4 Cyl 2.0L 122 1999
Centric
2009 Mazda 3 Disc Brake Caliper - Rear Left 4 Cyl 2.0L Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-553F883    141.45536  Remanufactured

Qty:
In Stock & Ready to Ship
$75.00 $62.07
Centric Disc Brake Caliper  Rear Left
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.09730
    • Grade Type: Regular
    • Inlet Fitting Type: Open
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Pads Included: No
    • Piston 1 Diameter: 38.000
    • Piston 2 Diameter: 38.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2009 - Mazda 3 Rear Left L 4 Cyl 2.0L 122 1999
Cardone
2009 Mazda 3 Disc Brake Caliper - Front Left Cardone - Unloaded Caliper

P311-582FB3A    19-2942  Remanufactured

36000484 , BPYK3371XA , BPYK3371XB , BPYK3371XC , CV6Z2B121A

Qty:
In Stock & Ready to Ship
$46.80 $53.59
Cardone Disc Brake Caliper  Front Left
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M8x1.25
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 56.896
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Aspiration Position
2009 - Mazda 3 Naturally Aspirated Front Left
Cardone
2009 Mazda 3 Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-1E9382C    19-2943  Remanufactured

36000485 , BPYK3361XA , BPYK3361XB , BPYK3361XC , CV6Z2B120A

Qty:
In Stock & Ready to Ship
$46.80 $53.59
Cardone Disc Brake Caliper  Front Right
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M8x1.25
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 56.896
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Aspiration Position
2009 - Mazda 3 Naturally Aspirated Front Right
Centric
2009 Mazda 3 Disc Brake Caliper - Front Right 4 Cyl 2.3L Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-37D4ABF    141.45107  Remanufactured

Qty:
In Stock & Ready to Ship
$85.00 $46.87
Centric Disc Brake Caliper  Front Right
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 8.000
      • M8x1.25
    • Bore Size mm: 57
    • Bore Size(s) millimeters: 57
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.10440
    • Grade Type: Regular
    • Inlet Fitting Type: Open
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Pads Included: No
    • Piston 1 Diameter: 57.000
    • Piston 2 Diameter: 57.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Right
Additional Fitment Information:
Vehicle Submodel Position Block Engine CID CC
2009 - Mazda 3 S Front Right L 4 Cyl 2.3L - 2260

Showing 1 - 10 of 73 Products for Disc Brake Caliper.