Shop By Brand

The Following brands are available based on your search.

  • FAST
    FAST
  • Holley
    Holley
  • MSD
    MSD

Showing Products For 2009 Kenworth C500 Fuel Injection System

Below are all the different brands and applications for 2009 Kenworth C500 Fuel Injection System

Showing 1 - 10 of 61 Products for Fuel Injection System.

Refine Your Search

MSD
Fuel Injection System MSD

P311-4514ABF    2900  New

Qty:
In Stock & Ready to Ship
$2,232.27
MSD Fuel Injection System
  • Atomic EFI Master Kit
  • Atomic EFI Master Kit; Carburetor Replacement Upgrade To EFI TBI with Fuel System; Includes Throttle Body/Power Module/Wide Band O2 Sensor/Handheld Programmer/Fuel Pump Kit PN[2920];
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Engine Make/Size:
      • Universal V4
      • Universal V6
      • Universal V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Easiest Fuel Injection System To Install
    • Half The Connections Of Other EFI Systems
    • Returnless Fuel System Design
    • No Need To Run A Second Fuel Line
    • Control Ignition Timing Through The ECU
    • Improved Air/Fuel Distribution
    • Self Learning Technology
    • Traditional Styling w/Modern Appeal
  • The Atomic system is based on an easy-to-install throttle body design that will provide modern drivability benefits to street rods and muscle cars – anything with a carburetor. It's meant to replace a standard square bore carburetor and can be installed by the average car guy and a friend in a home garage with simple tools within a weekend. In fact, with a little preparation, you should be able to start Saturday morning and make the cruise that night! We wanted to make EFI easy which means less wiring, self learning technology and a return less fuel system. This means you can incorporate the factory fuel line in most applications and you don't have to modify the tank or sending unit with a second line. Plus, the system is self learning and measures pressure and temperature so that once it is installed it's done. No lap top is needed for programming as everything is done through a simple hand-held monitor. Only 8 wires you will need to connect, plus you can control timing too!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
FAST
Fuel Injection System FAST

P311-47FCEFF    302000-06  New

Qty:
In Stock & Ready to Ship
$946.23
  • EZ Fuel Self-Tuning Multiport Injection Kit
  • For retrofitting extisting multiport fuel injection cars to EZ-EFI Self-Tuning Muliport Fuel Injection. Usually allows for retention of existing injectors and sensors.
  • Product Attributes:
    • Able to Control Boost?: No
    • Able to control ignition timing?: No
    • Boost Compatible?: No
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Can Support Internal Datalogging?: No
    • Compatible w/ E85 Fuel: No
    • Compatible w/ Returnless Fuel System?: No
    • Fuel Injection Series: Ez-efi Fuel
    • Individual Cylinder Corrections?: No
    • Injection Type: Multi-port
    • Knock Retard Compatibility?: No
    • Laptop Datalogging Support: No
    • Nitrous Compatible?: No
    • Requires Separate Personal Computer?: No
    • Title: Ez Fuel Self-tuning Multiport Injection Kit
    • Uses Fuel Pressure Sensor?: No
  • The next generation of the world's simplest self tuning fuel injection system is here. Designed for all applications making up to 650 horsepower, the EZ-EFI Fuel system easily bolts onto any carbureted or multi-port application in a single afternoon, making it the easiest EFI system you will ever install. Simply hook up the system, answer the questions from the Setup Wizard on the color touchscreen hand-held unit, and the system will tune itself as you drive. The hand-held includes a variety of display dashes, a clean and easy to use interface and an LED indicator that can alert users to any errors (including overheating) or be used as a shift light. An updated wiring harness features a premium loom, added protective fuses and a streamlined design, while the ECU hardware has been updated to provide added protection against electrical/ignition noise and hardware damage. FAST EZ-EFI Fuel now features a die cast and black powder-coated four-injector throttle body with integrated fuel rails. It provides even better fuel distribution and more airflow than the original, and NO manifold replacement is needed. In addition to matching any 4150-style carbureted manifold, the EZ-EFI Fuel Self Tuning Fuel Injection System also works with your original carb-style throttle linkage and features OEM sensors, including standard GM versions available at any auto parts store. What?s more, it works with all ignition setups ? including HEI. EZ-EFI Fuel can be installed easily in an afternoon and is a ?must have? for your street rod or muscle car. For more aggressive applications, the EZ-EFI Dual Quad Upgrade Kit is capable of supporting 1200+ horsepower engines with dual quad carburetor-type manifolds. In addition, the Multi-Port Retro-Fit EZ-EFI allows owners of multi-port fuel injected applications to experience the benefits of EFI with no limit on horsepower because the system is based on each customer?s supplied injectors.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
FAST
Fuel Injection System FAST

P311-54C1C14    30282-KIT  New

Qty:
In Stock & Ready to Ship
$839.18
  • EZ TCU Master Kit
  • Maximum control over shift points, shift firmness and shift speed. No software, laptop or experience needed. Completely intuitive programming interface or fully programmable based on load, speed and RPM.
  • Product Attributes:
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Title: Ez Tcu Master Kit
  • the EZ-TCU does all the work for you! The EZ-TCU is fully configured and ready to run right out of the box ? no tuning necessary. But for those who demand customization, the unit is also optionally fully programmable based on load, speed and RPM. The EZ-TCU programming interface is completely intuitive. There is no real expertise needed if you want to custom program your calibration. The EZ-TCU is capable of real-time switchable calibrations, which allows for multiple setups. Run one calibration on the way to the track, and then, with the push of a button, have a more aggressive setup ready for the race. The multiple shift modes include full manual mode for using bump switch or paddle shifters.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
FAST
Fuel Injection System FAST

P311-4E18F32    30404-KIT  New

Qty:
In Stock & Ready to Ship
$1,659.79
  • EZ 2.0 Fuel+Ignition Multi-Port Retro-Fit Kit
  • This EZ 2.0 kit includes a multiport harness for adapting factory equipped multiport EFI vehicles to an EZ 2.0 self-learning ECU.
  • Product Attributes:
    • Able to Control Boost?: No
    • Able to control ignition timing?: Yes
    • Boost Compatible?: No
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Can Support Internal Datalogging?: No
    • Compatible w/ E85 Fuel: Yes
    • Compatible w/ Returnless Fuel System?: Yes
    • Fuel Injection Series: Ez-efi Fuel+ignition
    • Individual Cylinder Corrections?: No
    • Injection Type: Multi-port
    • Knock Retard Compatibility?: No
    • Laptop Datalogging Support: No
    • Nitrous Compatible?: Yes
    • Requires Separate Personal Computer?: No
    • Title: Ez 2.0 Base Kit With Touchscreen And Multiport Harness
    • Uses Fuel Pressure Sensor?: Yes
  • The EZ-EFI 2.0 Fuel+Ignition Multi-Port Retro-Fit Kit allows owners of existing factory or aftermarket multi-port fuel injected applications and intake manifolds to experience the benefits of an EZ-EFI 2.0 system with no limit on horsepower because the system is based on each customer’s supplied injectors. Kit comes with everything needed to convert factory or aftermarket EFI systems into a complete FAST EZ-EFI 2.0 Fuel+Ignition system.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
FAST
Fuel Injection System FAST

P311-02EBF48    304003  New

Qty:
In Stock & Ready to Ship
$793.00
  • XFI Street Engine Management Upgrade Kit
  • The XFI Street Upgrade Kit contains everything needed to take your EZ-EFI Fuel to the next level. Including a new ECU, C-Com software and a communication cable, this kit is the most cost-effective way to make your EZ-EFI laptop tunable.
  • Product Attributes:
    • C.A.R.B. EO Number: N/a
    • C.A.R.B. Exempt?: No
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings. Ca.gov
    • Title: Xfi Street Engine Management Upgrade Kit
  • Features:
    • Converts an EZ-EFI Fuel to a fully laptop tunable fuel injection system.
    • Perfect for custom individual runner induction systems
    • Easy-to-use software for both novice & experienced tuners
    • Data logging makes tuning & troubleshooting easier
    • Advanced diagnostics help maintain peak performance
    • Direct plug-in compatibility with EZ-EFI Fuel main wiring harness, multi-port fuel injection wiring harness and 4150-flange throttle bodies.
  • The engineers at FAST® designed this all-new, laptop-tunable ECU to appeal to customers and dealers with simple EFI needs, but who prefer the greater flexibility afforded by laptop tuning. The XFI Street Engine Management System provides a cost-effective option for those customers who don’t need the most high-end system, but also want complete control. Since XFI Street™ uses the same wiring as the EZ-EFI, it could easily be installed in place of an existing EZ-EFI ECU. Utilizing included C-Com® software, XFI Street can be used to tune an engine whose characteristics are not ideal for the self-tuning features EZ-EFI provides. The XFI Street Engine Management System has data logging capability when connected to a laptop. The unit is offered in kits with an EZ four-injector throttle body and with or without a multi-port harness. It is intended only for naturally aspirated engines.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle
Holley
Fuel Injection System Holley

P311-5A59CC0    550-1012  New

Qty:
In Stock & Ready to Ship
$2,730.08
Holley Fuel Injection System
  • Terminator X Max Stealth 4150 System
  • Terminator X Max Stealth 4150 System; Fits w/GM TH350/400/200R4/700R4 Transmission And Control For Pre-2009 GM 4L60E/4L80E; 4 100LB/HR Fuel Injectors; Black;
  • Product Attributes:
    • Fuel Rate: 100 Lbs./hr
    • Transmission Model:
      • 700r4/200r4
      • Th350
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Bolt On 4150 Flange Carburetor Replacement
    • Supports Up To 650HP With Four 100lb/hr Injectors
    • Includes High Pressure Fuel Crossover Line
    • All Of The Wiring Exits Below The Rear Fuel Injector Cover
    • Timed Spark Part For Easy Access To The Distributor
    • Air Entry Machined Fit Most With Air Cleaner Locator Provisions
    • 58.5 PSI External Fuel Pressure Regulator Required
    • Integrated Ignition Timing Control Improves Idle Stability
    • High Resolution Full Color Touchscreen For Initial Setup
    • Simple Calibration Wizard No Laptop Required
    • OEM Style TPS/IAC For Years Of Dependable Service
  • The Terminator X Stealth 4150 EFI system from Holley features 4, 100LB/HR Fuel Injectors capable of supporting up to 650 HP naturally aspirated or 600 HP on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! Did we mention that the Stealth 4150 also includes transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications? Terminator X Max Stealth 4150 kits provide transmission control for Pre-2009 GM 4L60E/4L80E Transmissions (Part numbers 550-1011, 550-1012, 550-1013)

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Injection System Holley

P311-3DE86CE    550-917  New

Qty:
In Stock & Ready to Ship
$2,156.93
Holley Fuel Injection System
  • Terminator X Max Fuel Injection System
  • Terminator X Max Fuel Injection System; Engines w/24xCrank Reluctor/1X Cam;w/TransmissionControl;Incl.TBIUnit/ECU/BoschO2Sensors/3.5 in.Touch Screen; Fits Early Truck; w/4L60;
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Engine Make/Size: Chevy Ls Series
    • Fuel Rate: Oem
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Real Time Fuel Map
    • High Impedance Injector Drivers
    • Nitrous Control
    • Plug and Play Main Harness
    • Free EFI Tuning Software
  • Take control of your LS engine with Terminator X Max! Dont settle for a junkyard ECU with a cumbersome tuning interface when you can have complete control of your engine, self-learning fuel strategies and the proven, race-winning technology of Holley EFI at a budget-friendly price! Terminator X Max features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Part number 550-917 also has 4L60E or 4L80E Transmission control. Terminator X Max comes fully loaded with base maps for common LS engine combinations to get you out of the garage and on the road/track fast. The 3.5 in. touch screen LCD handheld contains an easy to use calibration wizard as well as tuning and gauge display functions. Also included is Holley EFIs industry-leading, easy to use software suite that allows full laptop access for advanced users. Whether you are building a budget beater or a boosted race car, Terminator X MAX has the features and technology you need at a price that wont break the bank!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Injection System Holley

P311-25C9A25    550-905  New

Qty:
In Stock & Ready to Ship
$1,665.81
Holley Fuel Injection System
  • Terminator X LS1 MPFI System
  • Terminator X LS1 MPFI System; Engines w/24x Crank Reluctor/1X Cam; Multec 2 Injector Harness; Includes TBI Unit/ECU/Bosch O2 Sensors/3.5 in. Touch Screen; Fits Late LS1/LS6 Trucks;
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Engine Make/Size:
      • Chevy Ls Series
      • Chevy Ls2 6.0l
    • Fuel Rate: Oem
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Real Time Fuel Map
    • High Impedance Injector Drivers
    • Nitrous Control
    • Plug and Play Main Harness
    • Free EFI Tuning Software
  • Take control of your LS engine with Terminator X! Dont settle for a junkyard ECU with a cumbersome tuning interface when you can have complete control of your engine, self-learning fuel strategies and the proven, race-winning technology of Holley EFI at a budget-friendly price! Terminator X features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Terminator X comes fully loaded with base maps for common LS engine combinations to get you out of the garage and on the road/track fast. The 3.5 in. touch screen LCD handheld contains an easy to use calibration wizard as well as tuning and gauge display functions. Also included is Holley EFIs industry-leading, easy to use software suite that allows full laptop access for advanced users. Whether you are building a budget beater or a boosted race car, Terminator X has the features and technology you need at a price that wont break the bank!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Injection System Holley

P311-03B3283    550-904  New

Qty:
In Stock & Ready to Ship
$1,665.81
Holley Fuel Injection System
  • Terminator X LS1 MPFI System
  • Terminator X LS1 MPFI System; Engines w/24x Crank Reluctor/1X Cam; Multec 2 Injector Harness; Includes TBI Unit/ECU/Bosch O2 Sensors/3.5 in. Touch Screen; Fits Early LS1/LS6 Trucks;
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Engine Make/Size: Chevy Ls Series
    • Fuel Rate: Oem
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Real Time Fuel Map
    • High Impedance Injector Drivers
    • Nitrous Control
    • Plug and Play Main Harness
    • Free EFI Tuning Software
  • Take control of your LS engine with Terminator X! Dont settle for a junkyard ECU with a cumbersome tuning interface when you can have complete control of your engine, self-learning fuel strategies and the proven, race-winning technology of Holley EFI at a budget-friendly price! Terminator X features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Terminator X comes fully loaded with base maps for common LS engine combinations to get you out of the garage and on the road/track fast. The 3.5 in. touch screen LCD handheld contains an easy to use calibration wizard as well as tuning and gauge display functions. Also included is Holley EFIs industry-leading, easy to use software suite that allows full laptop access for advanced users. Whether you are building a budget beater or a boosted race car, Terminator X has the features and technology you need at a price that wont break the bank!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Injection System Holley

P311-21960FB    550-540  New

Qty:
In Stock & Ready to Ship
$1,804.93
Holley Fuel Injection System
  • Holley Sniper EFI Xflow Injector System
  • Holley Sniper EFI Xflow Injector System; 900 cfm; 120 lb./hr. @ 58.5 psi; Up to 800 HP Natural Aspiration; 4 bbl; Shiny Finish;
  • Product Attributes:
    • Fuel Rate: 120 Lbs./hr
    • WARNING CA Proposition 65: No
  • Features:
    • Compatible W/Draw Or Blow Through Forced Induction Applications
    • Integrated Ignition Timing Control
    • Built In Single Stage Progressive Nitrous Control
    • User Friendly Boost Control With Handheld Adjustability
    • Programmable Target Air Fuel Ratios Per Boost Level
    • Simple Calibration Wizard
    • 2.5 In. Oxygen Sensor Kit For Leak Free Oxygen Sensor Install
    • Self-Tuning ECU Means You Dont Have To Be A Computer Wiz For EFI
    • Only 4 Wiring Connections Required
    • Oxygen Sensor Provides Realtime Fuel Map Learn
    • One Sensor Ground/Ground Supply For 0-5V Sensors
  • Introducing Sniper EFI XFlow! Are you building a naturally aspirated engine up to 800 Horsepower? Looking to convert your blow through carbureted turbo engine to EFI? Look no further! The Sniper EFI XFlow from Holley features 4, 120LB/HR Fuel Injectors and flows 900CFM allowing it safely supporting up to 800 HP on Naturally Aspirated engines. The XFlow comes with an internal 2.5bar MAP sensor that will safely work on boosted applications up to 21.5 psi. For applications making more than 21.5 psi, and has three additional 0-5v Sensor Inputs which can be used for an external MAP Sensor, or Dome Pressure for boost control, as well as oil pressure and fuel pressure. An External Fuel Pressure regulator is required; we recommend part number 12-848 for N/A applications.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 61 Products for Fuel Injection System.