Choose Vehicle Year

  1. Previous
  2. Home
  3. 2008
  4. Toyota
  5. Avalon
  6. Ignition
  7. Distributor

Shop By Brand

The Following brands are available based on your search.

  • Holley
    Holley
  • MSD
    MSD
  • Pertronix
    Pertronix

Showing Products For 2008 Toyota Avalon Distributor

Below are all the different brands and applications for 2008 Toyota Avalon Distributor

Showing 1 - 10 of 133 Products for Distributor.

Refine Your Search

MSD
Distributor MSD

P311-05CCF92    8485  New

Qty:
In Stock & Ready to Ship
$503.85
MSD Distributor
  • VW Type 1 Billet Distributor
  • VW Type 1 Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Air Cooled;
  • Product Attributes:
    • Distributor Type: Single Point
    • Engine Make/Size: Vw Type 1
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • A performance upgrade designed for VW Type I air cooled engines
    • Supplied w/Bolt Down Distributor Cap And Rotor
    • Must Be Used w/An MSD Ignition Control
    • Advance weight pins are staked and tig welded to the plate
    • Nylon pads ensure smooth operation of the advance weights
    • Mech. advance assem. can be locked out for crank trigger systems
    • Advance plate and weights are fine blanked from chrome moly steel
    • QPQ coated for friction reduction
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • CNC machined billet aluminum housing and Dupont Rynite base
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    • Maintenance-free magnetic pickup and precision reluctor
  • Using technology gained from building distributors for off-road and NASCAR racers, MSD offers this Billet Distributor for the popular Type 1 engine. A maintenance-free magnetic pickup is responsible for triggering the MSD Ignition. This pickup is accurate to within 1anddeg; at any rpm so you wont have to worry about points float or burbles at top end speeds. The pickup is triggered by a precision reluctor that is attached to a hardened steel shaft. For increased stability, a sealed ball bearing is used to guide the shaft. Since every engine application is different, the MSD Billet distributor features an easy-to-adjust mechanical advance assembly. By simply changing the advance springs and stop bushing you can tune in 24 different advance curves.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-45C1AE6    85705  New

Qty:
In Stock & Ready to Ship
$807.79
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; For Use w/Chevy Engine; Must Be Used w/MSD 6/7/8/10 Ignition Box; Supplied w/Bronze Gear;
  • Product Attributes:
    • Distributor Type: Hall-effect Pick Up
    • Engine Make/Size:
      • Chevy Big Block (396-502)
      • Chevy Small Block (262-400)
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • CNC Machined Billet Alum. Housing and Billet Alum. Base
    • Adj. slip collar mounting flange for engines w/modified deck hts.
    • Billet reluctor/magnetic pickup produce accurate trigger signals
    • Large diameter Ford style cap prevents spark scatter
    • Securely bolts in place
    • A Weather tight connector seals and locks the pickup wiring
    • Pickup/Reluctor Parylene Coated for Resistance Against Corrosion
  • MSD is proud to offer a new Pro-Billet Distributor designed to handle the rigors and harsh racing conditions of late model, modified, and off-road racing. The new distributor was designed with input from top racers and engine builders in circle track competition.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-5802E2C    83605  New

Qty:
In Stock & Ready to Ship
$575.83
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; Fits Chevy V8 w/Module; Black Cap;
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size: Chevy V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • CNC Machined Billet Alum. Housing and Billet Alum. Base
    • Will Not Accept Vacuum Advance Canister
    • Must Be Used w/MSD 6/7/8 Series Ignition Control
    • Supplied w/HEI Style Black w/316 Stainless Steel Terminals
    • O-Ring Seals Can Be Added To Modified Blocks
    • Special Oil Tract Improves Lubrication To Dist/Cam Gear
    • Nylon Pads Ensure Smooth Operation Of Advance Weights
    • Advance Weight Pins Are Staked/Tig Welded To The Plate
    • Mech. Advance Assy Can Be Locked Out For Crank Trigger Systems
    • Advance Plate/Weights Are Fine Blanked From Chromemoly Steel
    • Polished Steel Shaft is QPQ Coated/Guided By Sealed Ball Bearing
    • Maintenance-Free Magnetic Pickup/Precision Reluctor
  • The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance that allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-5ED1F5F    83606  New

Qty:
In Stock & Ready to Ship
$691.82
MSD Distributor
  • Pro-Billet Marine Ready-To-Run Distributor
  • Pro-Billet Marine Ready-To-Run Distributor; Chevy V8; Iron Gear; Red;
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size: Chevy Marine V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Only three wires to connect for a simple installation
    • High output module produces quick starts/smooth idle/performance
    • Accurate/maintenance-free magnetic pick-up never needs adjustment
    • Adjust The Mechanical Adv. w/Supplied Springs/Stop Bushings
    • Now includes built-in Rev Limiter
  • MSDs Ready-to-Run Marine Distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These new distributors feature a powerful ignition module built into the billet aluminum housing. This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down, injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom tailor a timing curve to match your application. The Ready-to-Run distributors are a breeze to install. Simply drop it into the engine and contect three wires and youre ready-to-run across the lake! Supplied with a cap, rotor, gear and weathertight wiring harness.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-07D7303    83506  New

Qty:
In Stock & Ready to Ship
$801.76
MSD Distributor
  • Pro-Billet Marine Ready-To-Run Distributor
  • Pro-Billet Marine Ready-To-Run Distributor; Ford 351C-460; Iron Gear; Red;
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size: Ford Marine 351c-460
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Only three wires to connect for a simple installation
    • High output module produces quick starts/smooth idle/performance
    • Accurate/maintenance-free magnetic pick-up never needs adjustment
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    • No MSD Ignition control required
  • MSDs Ready-to-Run Marine Distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These new distributors feature a powerful ignition module built into the billet aluminum housing. This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down, injection-molded cap, a maintenance-free magnetic pick-up produces accurate trigger signals while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom tailor a timing curve to match your application. The Ready-to-Run  Distributors are a breeze to install. Simply drop it in the engine and connect three wires and youre ready-to-run across the lake! Supplied with a cap, rotor, gear and Weathertight wiring harness.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-5148432    83603  New

Qty:
In Stock & Ready to Ship
$568.23
MSD Distributor
  • MSD Distributor
  • MSD Distributor; Chevy V8 w/Module; Black;
  • Product Attributes:
    • Distributor Type: Ready To Run
    • Engine Make/Size: Chevy V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Simple and clean three wire installation
    • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
    • Does not require an MSD Ignition Control
    • CARB E.O. Approved
    • Now includes built-in Rev Limiter
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • Nylon pads ensure smooth operation of the advance weights
    • Built-in module produces a 7.5 amp single spark through high rpm
    • Easy-to-adjust mech. advance w/supplied springs and stop bushings
    • Vacuum advance canister for improved economy (can be locked out)
    • CNC machined billet aluminum housing and billet aluminum base
  • This Black Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-1B128AD    85142  New

Qty:
In Stock & Ready to Ship
$462.54
MSD Distributor
  • Cam Sync Plug
  • Cam Sync Plug; Chevy Small/Big Block Tall Block; CNC Billet Housing w/Black Anodized Cap; Built-In L.E.D.;
  • Product Attributes:
    • Distributor Type: Cam Sync Plug
    • Engine Make/Size:
      • Chevy Big Block
      • Chevy Small Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Built-In LED Makes Set-Up And Indexing Quick And Easy
    • Supplied With A Equivalent Melonized Distributor Gear
    • 2-3/4 in. Of Adjustment For Different Deck Heights
    • O-Ring Seals Can Be Added To Improve Oil Pressure Control
  • MSDs cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder. MSDs cam sync is a plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems. The cam sync plug will have 2-3/4 of adjustment.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-05B983A    85501  New

Qty:
In Stock & Ready to Ship
$497.74
MSD Distributor
  • Pro-Billet Distributor
  • Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/Locked-Out Timing; Chevy V8; Bronze Gear; Red;
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • Engine Make/Size:
      • Chevy Big Block (396-454)
      • Chevy Small Block (262-400)
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Designed Primarily For Race Applications w/No Mech. Advance
    • Will not accept a vacuum advance canister
    • Must Be Used w/An MSD 6/7/8/10 Series Ignition
    • Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
    • Supplied w/0.006 in. Oversized Bronze Gear Installed
    • O-ring seals can be installed for oil press. control (Mods only)
    • Special oil tract improves lubrication to the dist./cam gear
    • QPQ coated polished steel shaft
    • guided by sealed ball bearings
    • Adj. slip collar mounting flange for engines w/modified deck hts.
    • Maintenance-free magnetic pickup and precision reluctor
    • Creates stable trigger signals throughout the rpm range
    • CNC machined billet aluminum housing and billet aluminum base
  • This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD Timing Computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized (+.006) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-52319DF    85061  New

Qty:
In Stock & Ready to Ship
$395.86
MSD Distributor
  • Cam Sync Plug
  • Cam Sync Plug; Ford 351W; CNC Billet Housing w/Black Anodized Cap; Plug-N-Play; Built-In L.E.D.; Supplied w/Steel Distributor Gear;
  • Product Attributes:
    • Distributor Gear: Steel
    • Distributor Type: Cam Sync Plug
    • Engine Make/Size: Ford 351w
    • Sensor Type: Hall Effect
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Built-In LED Makes Set-Up And Indexing Quick And Easy
    • CNC Billet Housing w/Black Anodized Cap
    • Compatible w/Other Aftermarket EFI Sys. Requiring Cam Sync Signal
    • Plug-N-Play w/Holley EFI
    • Supplied w/Steel Distributor Gear
  • MSDs cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder. For wet sump applications, the plug also drives the oil pump. MSDs cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
MSD
Distributor MSD

P311-3096774    8534  New

Qty:
In Stock & Ready to Ship
$407.45
MSD Distributor
  • Billet Distributor
  • Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Mopar 273/318/340/360 cid;
  • Product Attributes:
    • Distributor Type: Hei/breakerless
    • Engine Make/Size: Mopar 318-360
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • CNC machined billet aluminum housing and Dupont Rynite base
    • Must Be Used w/An MSD Ignition Control
    • Mech. advance assem. can be locked out for crank trigger systems
    • QPQ coated polished steel shaft
    • guided by 2 sealed ball bearings
  • Get your Mopar fired up with billet accuracy and performance. Remove the MSD cap and Race Rotor and youll find easy access to the adjustable mechanical advance assembly for easy adjustments. This advance is designed for accuracy and strength with TIG-welded weight pins, nylon pads for smooth movement of the weights and a QPQ coating for friction reduction. Different advance springs and stop bushings are supplied so you can custom tailor a timing curve to fit your Chryslers needs. Supporting the advance assembly is a hardened, polished steel shaft. Two ballbearing guides are used to support the shaft producing incredible stability. Precision paddles of a zinc-plated reluctor pass a maintenance-free magnetic pickup creating a trigger signal that tells the MSD to fire.

    • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 133 Products for Distributor.