Finish Selecting Your Vehicle

Choose your Submodel for your 2008 Saab 9-7x

  • 5.3i

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • Dorman
    Dorman
  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • MSD
    MSD
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Showing Products For 2008 Saab 9-7x Engine Intake Manifold

Below are all the different brands and applications for 2008 Saab 9-7x Engine Intake Manifold

Showing 1 - 10 of 156 Products for Engine Intake Manifold.

Refine Your Search

ACDelco
2008 Saab 9-7x Engine Intake Manifold 8 Cyl 5.3L ACDelco

P311-4C3FD10    W0133-2049996  New

Qty:
In Stock & Ready to Ship
$362.44
ACDelco Engine Intake Manifold
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
Brand: ACDelco
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Saab 9-7x V 8 Cyl 5.3L 325 5328
MSD
2008 Saab 9-7x Engine Intake Manifold - Upper 8 Cyl 6.0L MSD - Atomic Airforce Intake Manifold

P311-1DEAE89    27023  New

Qty:
In Stock & Ready to Ship
$1,273.54
MSD Engine Intake Manifold  Upper
  • 103mm Throttle Body Bore; Polymer; Black w/Solid Black Logos;CARB E.O. D-722-3 Aftermarket Fuel Rails May Req. Customer Supplied Spacers/Hdw.
  • Atomic Airforce Intake Manifold; Upper; 103mm Throttle Body Bore; Polymer; Black w/Solid Black Logos;
  • Atomic Airforce Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Ls1/2/6
    • Number of Carbs: None; For Fuel Injection
    • RPM: Oem
    • RPM Range: Oem
    • Usage: Street/strip
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • 50 State Legal
    • Carb E.O. D-722-3
    • Designed Using Computational Fluid Dynamic Modeling
    • Optimal Plenum Volume And Efficient Air Flow Paths
    • 2 Pc. Manifold Design Provides Access To The Runners For Porting
    • Direct Flow Path Runner Design Promotes Maximum Airflow
    • 103mm Throttle Bore Allows The Use Of Large Throttle Bodies
    • Polymer Material Resists Heat Soak And Minimizes Weight
    • Allows For The Use Of Stock And Aftermarket Fuel Rails
  • Now available in SOLID BLACK or GRAY logos! The MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails*. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Brand: MSD
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2008 - Saab 9-7x Upper V 8 Cyl 6.0L 364 5967
MSD
2008 Saab 9-7x Engine Intake Manifold - Upper 8 Cyl 6.0L MSD - Atomic Airforce Intake Manifold

P311-1DEAE89    27023  New

Qty:
In Stock & Ready to Ship
$1,273.54
MSD Engine Intake Manifold  Upper
  • 103mm Throttle Body Bore; Polymer; Black w/Solid Black Logos;CARB E.O. D-722-3 Aftermarket Fuel Rails May Req. Customer Supplied Spacers/Hdw.
  • Atomic Airforce Intake Manifold; Upper; 103mm Throttle Body Bore; Polymer; Black w/Solid Black Logos;
  • Atomic Airforce Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Ls1/2/6
    • Number of Carbs: None; For Fuel Injection
    • RPM: Oem
    • RPM Range: Oem
    • Usage: Street/strip
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • 50 State Legal
    • Carb E.O. D-722-3
    • Designed Using Computational Fluid Dynamic Modeling
    • Optimal Plenum Volume And Efficient Air Flow Paths
    • 2 Pc. Manifold Design Provides Access To The Runners For Porting
    • Direct Flow Path Runner Design Promotes Maximum Airflow
    • 103mm Throttle Bore Allows The Use Of Large Throttle Bodies
    • Polymer Material Resists Heat Soak And Minimizes Weight
    • Allows For The Use Of Stock And Aftermarket Fuel Rails
  • Now available in SOLID BLACK or GRAY logos! The MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails*. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Brand: MSD
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2008 - Saab 9-7x Upper V 8 Cyl 6.0L 364 5967
FAST
2008 Saab 9-7x Engine Intake Manifold 8 Cyl 5.3L FAST

P311-1F78337    146602B  New

Qty:
In Stock & Ready to Ship
$1,324.57
  • LSXrt 102mm Cathedral Port Intake Manifold for 4.8, 5.3 and 6.0L LS Trucks
  • The FAST LSX 102mm Intake Manifold for GM 4.8, 5.3 and 6.0 truck engines provides bolt-on performance gains without any loss in bottom-end drivability.This manifold features our standard design runners for use in mild street applications.
  • Product Attributes:
    • C.A.R.B. EO Number: D-279-10
    • C.A.R.B. Exempt?: Yes
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Intake Port Style: Cathedral
    • Title: Lsxrt 102mm Cathedral Port Intake Manifold For 4.8, 5.3 And 6.0l Ls Trucks
  • Features:
    • Modular design allows for fast and easy disassembly
    • Removable runners allow for porting
    • Include integrated nitrous bungs
    • Permits the use of factory accessories and OEM fuel/emission connections without adjustments or clearance issues.
    • Designed for use with FAST 102mm Big Mouth Throttle Body
    • 102mm inlet works with OEM electronic 78/90mm or aftermarket 90/92mm throttle bodies for high flow and minimal restriction (three-bolt electronic throttle bodies require an adapter)
    • Advanced polymer material is strong, lightweight and cools intake charge for enhanced power
    • Big gains in rear-wheel HP yet retains factory fitments and underhood clearance requirements
  • The LSXRT is constructed from a proprietary precision injection
Brand: FAST
Additional Fitment Information:
Vehicle Submodel Engine Designation Region Engine VIN Block Engine CID CC
2008 - Saab 9-7x 5.3i LH6 Canada M V 8 Cyl 5.3L 325 5328
FAST
2008 Saab 9-7x Engine Intake Manifold 8 Cyl 5.3L FAST

P311-47883EA    146302B  New

Qty:
In Stock & Ready to Ship
$1,263.96
  • LSXr 102mm Cathedral Port Intake Manifold for LS1/2/6
  • The use of lower profile car manifolds on trucks, vans and SUV's may require the changing of front drive accessories, throttle bodies, fuel rails and injectors.
  • The FAST LSX 102mm Intake Manifold for GM LS1, LS2 and LS6 engines provides bolt-on performance gains w/o any loss in bottom-end drivability.This manifold features our standard design runners for use in mild street-oriented applications.
  • Product Attributes:
    • C.A.R.B. EO Number: D-279-10
    • C.A.R.B. Exempt?: Yes
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Intake Port Style: Cathedral
    • Title: Lsxr 102mm Cathedral Port Intake Manifold For Ls1/2/6
  • Features:
    • Modular design allows for fast and easy disassembly
    • Removable runners allow for porting
    • Improved throttle body sealing flange and o-ring gasket
    • High quality polymer materials resist the heat sink effecct of aluminum
    • Maximizes potential of other engine performance upgrades like cylinder heads
    • Designed to work with FAST Big Mouth and Big Mouth LT Throttle Bodies
    • Includes stainless steel bolts, threaded insert throttle body mounts and necessary mounting hardware.
  • Constructed from the same advanced polymer material as the original FAST LSX 92mm Intake Manifold, but now in the popular black color, the LSXR offers a host of benefits over aluminum aftermarket intakes, including lighter weight, increased strength and improved heat dissipating characteristics.
Brand: FAST
Additional Fitment Information:
Vehicle Submodel Engine Designation Region Engine VIN Block Engine CID CC
2008 - Saab 9-7x 5.3i LH6 Canada M V 8 Cyl 5.3L 325 5328
FAST
2008 Saab 9-7x Engine Intake Manifold 8 Cyl 5.3L FAST

P311-1F78337    146602B  New

Qty:
In Stock & Ready to Ship
$1,324.57
  • LSXrt 102mm Cathedral Port Intake Manifold for 4.8, 5.3 and 6.0L LS Trucks
  • The FAST LSX 102mm Intake Manifold for GM 4.8, 5.3 and 6.0 truck engines provides bolt-on performance gains without any loss in bottom-end drivability.This manifold features our standard design runners for use in mild street applications.
  • Product Attributes:
    • C.A.R.B. EO Number: D-279-10
    • C.A.R.B. Exempt?: Yes
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Intake Port Style: Cathedral
    • Title: Lsxrt 102mm Cathedral Port Intake Manifold For 4.8, 5.3 And 6.0l Ls Trucks
  • Features:
    • Modular design allows for fast and easy disassembly
    • Removable runners allow for porting
    • Include integrated nitrous bungs
    • Permits the use of factory accessories and OEM fuel/emission connections without adjustments or clearance issues.
    • Designed for use with FAST 102mm Big Mouth Throttle Body
    • 102mm inlet works with OEM electronic 78/90mm or aftermarket 90/92mm throttle bodies for high flow and minimal restriction (three-bolt electronic throttle bodies require an adapter)
    • Advanced polymer material is strong, lightweight and cools intake charge for enhanced power
    • Big gains in rear-wheel HP yet retains factory fitments and underhood clearance requirements
  • The LSXRT is constructed from a proprietary precision injection
Brand: FAST
Additional Fitment Information:
Vehicle Submodel Engine Designation Region Engine VIN Block Engine CID CC
2008 - Saab 9-7x 5.3i LH6 Canada M V 8 Cyl 5.3L 325 5328
FAST
2008 Saab 9-7x Engine Intake Manifold 8 Cyl 5.3L FAST

P311-47883EA    146302B  New

Qty:
In Stock & Ready to Ship
$1,263.96
  • LSXr 102mm Cathedral Port Intake Manifold for LS1/2/6
  • The use of lower profile car manifolds on trucks, vans and SUV's may require the changing of front drive accessories, throttle bodies, fuel rails and injectors.
  • The FAST LSX 102mm Intake Manifold for GM LS1, LS2 and LS6 engines provides bolt-on performance gains w/o any loss in bottom-end drivability.This manifold features our standard design runners for use in mild street-oriented applications.
  • Product Attributes:
    • C.A.R.B. EO Number: D-279-10
    • C.A.R.B. Exempt?: Yes
    • California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
    • Intake Port Style: Cathedral
    • Title: Lsxr 102mm Cathedral Port Intake Manifold For Ls1/2/6
  • Features:
    • Modular design allows for fast and easy disassembly
    • Removable runners allow for porting
    • Improved throttle body sealing flange and o-ring gasket
    • High quality polymer materials resist the heat sink effecct of aluminum
    • Maximizes potential of other engine performance upgrades like cylinder heads
    • Designed to work with FAST Big Mouth and Big Mouth LT Throttle Bodies
    • Includes stainless steel bolts, threaded insert throttle body mounts and necessary mounting hardware.
  • Constructed from the same advanced polymer material as the original FAST LSX 92mm Intake Manifold, but now in the popular black color, the LSXR offers a host of benefits over aluminum aftermarket intakes, including lighter weight, increased strength and improved heat dissipating characteristics.
Brand: FAST
Additional Fitment Information:
Vehicle Submodel Engine Designation Region Engine VIN Block Engine CID CC
2008 - Saab 9-7x 5.3i LH6 Canada M V 8 Cyl 5.3L 325 5328
Dorman
2008 Saab 9-7x Engine Intake Manifold - Upper 6 Cyl 4.2L Dorman

P311-1FA4370    615-568  New

89060570

Qty:
In Stock & Ready to Ship
$292.53
Dorman Engine Intake Manifold  Upper
  • Upper Plastic Intake Manifold - Includes Gaskets
  • 1 Piece
  • Product Attributes:
    • Air Conditioning Compressor Mount: No
    • Alternator Mount: No
    • EGR Ready: No
    • Grade Type: Regular
    • Heated Choke Port: No
    • High-Riser: No
    • Installation Instructions Included: Yes
    • Manifold Height (in): 7 In
    • Package Contents: Manifold; Gaskets; Mounting Hardware
    • Port Outlet Dimensions: 2x1.5
    • Port Quantity: 6
    • Street Legal: Yes
  • Features:
    • Ideal replacement - this intake manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
    • Reliable construction - tested to ensure top-quality OEM performance and durability
    • Perfect fit - designed to match all specifications of the original part for convenient, trouble-free installation
    • Trustworthy design - built by the industry leader in aftermarket manifolds
  • This engine intake manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It is thoroughly tested to ensure top-quality OEM construction and superior reliability.
Brand: Dorman
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2008 - Saab 9-7x Upper L 6 Cyl 4.2L 256 -
Weiand
Engine Intake Manifold Weiand

P311-2466FAB    7151WND  New

Qty:
In Stock & Ready to Ship
$719.53
Weiand Engine Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold
  • 6-71 / 8-71 SuperCharger Intake Manifold; Lower; w/Rectangular Port Heads; Includes Rear Mounted Pop Off Plate; w/Boost Gauge Port; Satin Finish;
  • Product Attributes:
    • Blower Size:
      • 6-71
      • 8-71
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Big Block V8
    • Number of Carbs: None; For Fuel Injection
    • RPM Range: N/a
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Easier Installation
    • Satin Finish
  • 6-71/8-71 Chevy B/B 396-502

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Weiand
Additional Fitment Information:
Vehicle
FAST
Engine Intake Manifold FAST

P311-3C605F6    146303  New

Qty:
In Stock & Ready to Ship
$1,368.21
  • LSXHR 103mm Intake Manifold for Cathedral Port LS1, LS2 and LS6
  • FAST® is expanding their line of the industry’s first polymer tunnel ram-style intake manifold, ideal for generating maximum power in boosted and naturally aspirated GM Cathedral Port LS engines.
  • Product Attributes:
    • Aftermarket Fuel Rail Required: No
    • Basic Operating RPM Range: 5000-7500
    • Cylinder Head Configuration: Ls1 / Cathedral Port
    • EGR: No
    • Engine Block Style: Stock/ Oem Standard Deck
    • Injection Style: Multi-port
    • Injectors Included: No
    • Intake Section Included: Complete
    • Multi-Port Fuel Rails Included: Yes
    • Supplemental Bosses Cast-In: No
    • Supplemental Bosses Machined: Yes
    • Throttle Body Bore Size: 103mm
    • Throttle Body Included: No
  • The FAST LSXHR 103mm Intake Manifold is ideal for generating maximum power in boosted and naturally aspirated GM LS cathedral port engines. It ships with a set of “tall” removeable velocity stacks, however “medium” and “short” stack options can be purchased separately. This allows interchanging of the various runner lengths so racers can experiment with finding which combination makes the most power in their application. Its polymer construction is lightweight, very strong and virtually eliminates power-robbing heat soak that occurs with commonly available aluminum intake manifolds. The manifold has been optimized to make power from 5,000 to 7,500 RPM, with testing showing 20+ horsepower gains over competitor tunnel ram intake manifolds. The FAST LSXHR 103mm Intake Manifold is designed specifically with boosted applications in mind and is rated for up to 45psi of continuous boost pressure. The compound fuel injector angle aims the spray pattern for ideal atomization, resulting in maximum power production and superior drivability. Also included with the intake manifold are custom fuel rails and necessary hardware. A reversible top allows for forward- or firewall-facing throttle body installations. The intake manifold also features two nitrous nozzle bosses per runner for clean and easy direct port system installations. Additionally, its 103mm throttle body opening can be port matched up to 105mm.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: FAST
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 156 Products for Engine Intake Manifold.