Finish Selecting Your Vehicle

Choose your Engine for your 2008 Saab 9-3

  • 4 Cyl 2.0L
  • 6 Cyl 2.8L

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • Cometic Gasket
    Cometic Gasket
  • Elring
    Elring
  • FelPro
    FelPro
  • Ford Racing
    Ford Racing
  • Sce Gaskets
    Sce Gaskets
  • Victor Gaskets
    Victor Gaskets
  • Victor Reinz
    Victor Reinz

Showing Products For 2008 Saab 9-3 Engine Cylinder Head Gasket

Below are all the different brands and applications for 2008 Saab 9-3 Engine Cylinder Head Gasket

Showing 1 - 10 of 178 Products for Engine Cylinder Head Gasket.

Refine Your Search

ACDelco
2008 Saab 9-3 Engine Cylinder Head Gasket - Rear 6 Cyl 2.8L ACDelco

P311-16A6F11    W0133-1919389  New

Qty:
In Stock & Ready to Ship
$79.81
ACDelco Engine Cylinder Head Gasket  Rear
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
  • Firewall Side
Brand: ACDelco
Position: Rear
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2008 - Saab 9-3 Rear V 6 Cyl 2.8L 170 2792
ACDelco
2008 Saab 9-3 Engine Cylinder Head Gasket - Front 6 Cyl 2.8L ACDelco

P311-56C9513    W0133-1930592  New

Qty:
In Stock & Ready to Ship
$82.06
ACDelco Engine Cylinder Head Gasket  Front
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
  • Radiator Side
Brand: ACDelco
Position: Front
Additional Fitment Information:
Vehicle Position Block Engine CID CC
2008 - Saab 9-3 Front V 6 Cyl 2.8L 170 2792
Victor Reinz
2008 Saab 9-3 Engine Cylinder Head Gasket 4 Cyl 2.0L Victor Reinz

P311-3EA544A    W0133-1795480  New

Qty:
In Stock & Ready to Ship
$68.79
Victor Reinz Engine Cylinder Head Gasket
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Victor Reinz
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Saab 9-3 L 4 Cyl 2.0L 122 1998
Victor Gaskets
2008 Saab 9-3 Engine Cylinder Head Gasket 4 Cyl 2.0L Victor Gaskets

P311-4BABB10    54633  New

26584 PT , 93175913

Qty:
In Stock & Ready to Ship
$48.02
Victor Gaskets Engine Cylinder Head Gasket
  • Engine Cylinder Head Gasket
  • Multi-Layered Steel
  • Product Attributes:
    • Additional Package Contents: Head Gasket
    • Cylinder Bore Diameter:
      • 3.42
      • 86.74
    • Cylinder Head Gasket Material: Multi-layered Steel
    • Gasket Sealant Included: No
    • Item Grade: Oem Standard
    • Torque To Yield: Yes
  • MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Brand: Victor Gaskets
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Saab 9-3 L 4 Cyl 2.0L 122 1998
Elring
2008 Saab 9-3 Engine Cylinder Head Gasket 4 Cyl 2.0L Elring

P311-082B34C    081.581  New

081.580 , 10146600 , 26584 PT , 415139P , 54633 , 56 07 811 , 61-36220-00 , 93 175 913 , H80488-00

Qty:
In Stock & Ready to Ship
$54.74
  • Gasket, cylinder head
  • Diameter: 87.05mm
  • Product Attributes:
    • Additionally required articles (article numbers): 257.910
    • Gasket Design: Multilayer Steel (mls)
Brand: Elring
Additional Fitment Information:
Vehicle Engine Designation Body Block Engine CID CC
2008 - Saab 9-3 B207R Sedan L 4 Cyl 2.0L 122 1998
FelPro
2008 Saab 9-3 Engine Cylinder Head Gasket 4 Cyl 2.0L FelPro

P311-2EA6BAA    26584 PT  New

54633 , 93 17 5913

Qty:
In Stock & Ready to Ship
$70.16
  • Head Gasket
  • Head Bolts Not Included Head Bolt Replacement Recommended ; PermaTorqueMLS
  • FEL-PRO 26584 PT Head Gasket
  • Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Brand: FelPro
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Saab 9-3 L 4 Cyl 2.0L 122 1998
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-07A1D42    C5635-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
  • GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.530in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv/v/iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-2BD52D3    C5764-051  New

Qty:
In Stock & Ready to Ship
$125.00
Cometic Gasket Engine Cylinder Head Gasket
  • GM L18 Vortec 8100 Gen-VII Big Block V8 Cylinder Head Gasket
  • GM L18 Vortec 8100 Gen-VII Big Block V8 .051in. MLS Cylinder Head Gasket; 4.280in. Bore; LHS
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine 8.1l
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.051". Left Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-1EC80FE    C5641-060  New

Qty:
In Stock & Ready to Ship
$135.70
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .060in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.600in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.060". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Cometic Gasket
Engine Cylinder Head Gasket Cometic Gasket

P311-046971A    C5641-051  New

Qty:
In Stock & Ready to Ship
$114.71
Cometic Gasket Engine Cylinder Head Gasket
  • GM/Mercury Marine Gen-IV Cylinder Head Gasket
  • GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.600in. Bore
  • Product Attributes:
    • Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Provides Maximum Sealing Performance
    • Ideal For Aluminum Heads To Aluminum Blocks
    • Ideal For Aluminum Heads To Cast Iron Blocks
    • Comprised Of Multiple Layers Of Stainless Steel
    • Creates The Ability To Rebound And Resist Corrosion
    • Embossed Outer Layers Coated w/Viton
  • Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 178 Products for Engine Cylinder Head Gasket.