Finish Selecting Your Vehicle

Choose your Engine for your 2008 Mazda 3

  • 4 Cyl 2.3L

Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Dorman
    Dorman
  • MPA
    MPA
  • Mahle
    Mahle
  • Rotomaster
    Rotomaster
  • Thermo-Tec
    Thermo-Tec

Showing Products For 2008 Mazda 3 Turbocharger

Below are all the different brands and applications for 2008 Mazda 3 Turbocharger

Showing 1 - 9 of 9 Products for Turbocharger.

Refine Your Search

Mahle
2008 Mazda 3 Turbocharger 4 Cyl 2.3L Mahle

P311-58128D4    627TC20002100  Remanufactured

2T-751 , A8040102R , L3Y11370ZC , L3Y31370ZC , L3YB1370ZA

Qty:
In Stock & Ready to Ship
$200.00 $648.09
  • Remanufactured Turbocharger
  • Condition Remanufactured
  • MAHLE® turbochargers, for diesel and gasoline engines, are OE quality and are remanufactured to meet or exceed OE standards.
Brand: Mahle
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Mazda 3 L 4 Cyl 2.3L - 2260
Rotomaster
2008 Mazda 3 Turbocharger 4 Cyl 2.3L Rotomaster - New Turbocharger

P311-587F886    K1040182N  New

L3Y11370ZC , L3Y31370ZC , L3YB1370Z , L3YB1370ZA

Qty:
In Stock & Ready to Ship
$784.50
Rotomaster Turbocharger
  • Turbocharger
  • Engine oil and filter MUST be changed to ensure proper replacement turbo function. Refer to installation guide in box. Failure to follow VOIDS WARRANTY Special order only - SKU cannot be ordered as a part of a stocking PO. Please work with your sales rep on availability
  • New Turbocharger
  • Product Attributes:
    • Bearing Type: Journal
    • E-Waste: No
    • FAQs:
      • Can The Turbocharger Fail If A Foreign Object Is Sucked In?
      • Do I Need To Let The Engine Cool Off Before Shutting Down?
      • Do I Need To Replace The Engine Oil At Regular Intervals?
      • Do Your Aftermarket Turbochargers Meet Emission Regulations?
      • Yes, All Turbochargers Are Engineered To Match O.e. Performance And Comply With All Federal Regulations.
      • Yes, Cutting Off The Supply Of Fresh Oil To A Hot Turbocharger Can Cause Oil Coking.
      • Yes, Most Turbocharger Failures Are Caused By Oil Starvation From Old Or Contaminated Oil.
      • Yes, Replacing The Air Filter And Cleaning Entire Air And Exhaust System Will Prevent Damage To The Fragile Blades On The Turbocharger Wheels.
    • Features and Benefits:
      • 100% Dynamic Balancing Of Compressor Wheels, Turbine Shaft/wheel Assemblies And Complete Rotating Assembly Guarantees Proper Operation And Extends Unit Life.
      • 100% Dynamic Balancing Of Compressor Wheels, Turbine Shaft/wheel Assemblies And Complete Rotating Assembly Guarantees Proper Operation And Extends Unit Life.
      • All Units Come With The Required Gaskets And Mounting Hardware For Easy Installation.
      • Comes With A Pre-lube Syringe To Ensure Product Protection During Installation.
      • Manufactured With 100% New Components And Tested To Ensure Trouble-free Operation
      • Meets Or Exceeds O.e. Performance.
      • Unit Comes With A Pre-lube Syringe To Ensure Product Protection During Installation.
      • Unit Comes With The Required Gaskets And Mounting Hardware For Easy Installation.
    • Mounting Bracket Included: No
    • Mounting Hardware Included: No
    • Package Contents: Turbocharger; Instruction Sheets; Gaskets; Washers; Studs; Syringe
    • Product Condition: New
    • Product Description: Rotomaster 100% New Turbochargers Are Available For A Vast Array Of Automotive Applications To Meet The Growing Demand For Maximum Vehicle Performance With Optimal Fuel Efficiency. Every Rotomaster Turbocharger Has Been Designed And Tested To Guarantee O.
    • Troubleshooting Tip:
      • A Decrease In Engine Power May Be Your First Indication Your Turbocharger Is Damaged Or Has Failed.
      • Any Nicks, Scratches, Or Chips On Either Wheel Are Evidence Foreign Object Damage Caused By Contaminants Entering The Airflow To Or From The Engine.
      • Axial End Play Of The Wheels And Shaft In And Out Greater Than The Thickness Of A Sheet Of Paper Indicates A Worn Thrust Bearing Due To Excessive Exhaust Backpressure.
      • Before A Failed Turbocharger Is Replaced The Original Cause Of Failure Must Be Diagnosed And Corrected To Protect The New Installation.
      • Common Signs Of Wear Indicating Replacement May Be Required:
      • Contact Of Either Wheel Resulting From Excessive Radial Play Indicates Worn Rotating Components Likely Due To Improper Lubrication.
      • Worn Engines With Excessive Blow By Will Result In Crankcase Pressurization, Leading To Oil Leaking From The Turbochargers Internal Seals. This May Result In Oil Deposits In The Intake Manifold Or Smoke In The Exhaust. This Is Not Necessarily A Sign Of
    • Turbocharger Cooling Method: Oil & Coolant
    • Wastegate Actuator Included: Yes
  • Rotomaster 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.
Brand: Rotomaster
Additional Fitment Information:
Vehicle Engine Designation Block Engine CID CC
2008 - Mazda 3 MZR L 4 Cyl 2.3L - 2260
BBB Industries
2008 Mazda 3 Turbocharger 4 Cyl 2.3L BBB Industries - Reman Turbocharger with Gasket and Installation Kit

P311-08BCDE1    G8001  Remanufactured

L3K9-13-700F , L3Y1-13-70ZC , L3Y3-13-70ZC , L3Y4-13-70ZC , L3YB-13-70Z , L3YC-13-70Z , L3YC-13-70ZA

Qty:
In Stock & Ready to Ship
$120.00 $705.24
BBB Industries Turbocharger
  • Reman Turbocharger with Gasket and Installation Kit
  • Product Attributes:
    • Bearing Type: Journal
    • Coolant Return Line Included: Yes
    • Cooling Method: Oil Cooled
    • Exhaust Brake: No
    • Meets or Exceeds Original Equipment Manufacture Specifications: Meets Or Exceeds Oem Specs
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: Yes
    • Oil Supply Line Included: No
    • Position Sensor: No
    • Speed Sensor: No
    • Temperature Sensor: No
    • Turbine Type: Fixed Geometry
    • Wastegate Actuator Included: Yes
    • Wastegate Type: Pneumatic
Brand: BBB Industries
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
2008 - Mazda 3 Turbocharged L 4 Cyl 2.3L - 2260
MPA
2008 Mazda 3 Turbocharger 4 Cyl 2.3L MPA - New

P311-0B7AAE5    T2063N  New

2N750 , 2T750 , L33L-13-700B , L33L-13-700C , L3Y1-13-70ZC , L3Y3-13-70ZC , L3Y4-13-70ZC , L3YC-13-70Z , L3YC-13-70ZA

Qty:
In Stock & Ready to Ship
$726.26
MPA Turbocharger
  • Turbocharger New
  • Includes gaskets, actuator
  • New
  • Product Attributes:
    • Bearing Type: Journal
    • Boost Solenoid Included: Not Required
    • Cooling Method: Engine Oil And Or Coolant
    • Gasket and Mounting Kit Included: Yes
    • Recirculation Valve Included: Not Required
    • Sensor Included: Not Required
    • Turbine Housing Material: Cast Iron / Cast Iron Alloy
    • Turbocharger Compressor Housing Material: Aluminum Alloy
    • Vane Control Solenoid / Servo Valve Included: Not Required
    • Vane Controller Included: Not Required
    • Wastegate Actuator Included: Yes
Brand: MPA
Additional Fitment Information:
Vehicle Engine Designation Aspiration Block Engine CID CC
2008 - Mazda 3 MZR Turbocharged L 4 Cyl 2.3L - 2260
Dorman
2008 Mazda 3 Turbocharger 4 Cyl 2.3L Dorman

P311-3B411A1    917-152  New

2N-751 , 627TC20002100 , L3K913700F , L3Y11370Z , L3Y11370ZA , L3Y11370ZB , L3Y11370ZC , L3Y31370ZC , L3YB1370Z , L3YB1370ZA

Qty:
In Stock & Ready to Ship
$803.42
Dorman Turbocharger
  • Turbocharger And Gasket Kit
  • Product Attributes:
    • Center Housing Cooling Type: Coolant And Oil
    • Color/Finish: Natural
    • Item Grade:
      • Regular
      • Standard Replacement
    • Mounting Hardware Included: No
    • Package Contents: Turbocharger And Gaskets
    • Wastegate Actuator Included: Yes
  • Features:
    • Direct replacement - this turbocharger is built to match the performance of original equipment for specific vehicles
    • Complete kit - comes with turbocharger and gasket kit for added convenience
    • Thoroughly tested - part has undergone fit, performance and corrosion testing to ensure longevity and reliability
    • Repair tip - also replace oil and coolant inlet and drain tubes (not included) to ensure turbo function
  • Turbocharger seals or bearings gone bad? This replacement turbocharger is designed to replace the original equipment on specific vehicle years, makes and models to reliably restore engine performance.
Brand: Dorman
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
2008 - Mazda 3 Turbocharged L 4 Cyl 2.3L - 2260
Thermo-Tec
Turbocharger Thermo-Tec

P311-0B1E277    15073  New

Qty:
In Stock & Ready to Ship
$148.62
Thermo-Tec Turbocharger
  • Rogue Series Ricochet Turbo Cover
  • Rogue Series Ricochet Turbo Cover; T3; Black;
  • Features:
    • New Easy Fit Design
    • Keeps Turbine Spooled Reducing Turbo Lag
    • Dual Layer Construction
    • Increases Performance And Durability
    • Reduces Under Hood Temperatures
    • Improves Horsepower And Performance
    • Maintains Temperatures Inside The Turbo
    • Includes Wiring For Easy Installation
  • The new, easy fit design of the Rogue Series Turbo Cover keeps the turbine spooled up, reducing turbo lag. The dual layer construction increases performance and durability, reduces under hood temperatures, improves horsepower and performance by maintaining temperatures inside the turbo. Includes wiring for easy installation.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle
Thermo-Tec
Turbocharger Thermo-Tec

P311-1ABA984    15003  New

Qty:
In Stock & Ready to Ship
$54.37
Thermo-Tec Turbocharger
  • Turbo Insulating Kit
  • Turbo Insulating Kit; Includes Turbo Insulation Cover Only;
  • Features:
    • Easy Fit Design
    • Improves Turbo Lag Problems
    • Reduces Temperature Under The Hood
    • Construction Increases Performance And Durability
    • Made In The USA
  • The Turbo Kit was designed to protect, improve performance, and eliminate turbo lag of a turbo charger. The key to turbo performance is to keep a flow of high temperature exhaust gases moving through the exhaust side impeller. This complete kit, to contain the heat produced by a turbo, fits a wide variety of turbines. The custom cut-to-fit kit comes with an excessive amount of material to cover turbos from the smallest automotive application to heavy-duty truck applications.Two Turbo Kits are available - a four cylinder kit, and a six and eight cylinder kit. Each kit contains a roll of Exhaust Insulating Wrap 1 or 2 inch, 1 yard of Aluminized Heat Barrier, and a 3-foot X 6-inch piece of Exhaust Insulating Wrap. Hardware and instructions are included. Also available with the turbo insulation cover only containing a 3-foot X 6-inch piece of exhaust wrap and a 20-inch X 24-inch piece of Aluminized Heat Barrier.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle
Thermo-Tec
Turbocharger Thermo-Tec

P311-57E2465    15004  New

Qty:
In Stock & Ready to Ship
$229.70
Thermo-Tec Turbocharger
  • Turbo Insulating Kit
  • Turbo Insulating Kit; Includes Grommets And Wiring; Fits T3 And T4 Turbine;
  • Features:
    • Easy Fit Design
    • Improves Turbo Lag Problems
    • Reduces Temperature Under The Hood
    • Construction Increases Performance And Durability
    • Made In The USA
  • The Turbo Kit was designed to protect, improve performance, and eliminate turbo lag of a turbo charger. The key to turbo performance is to keep a flow of high temperature exhaust gases moving through the exhaust side impeller. This complete kit, to contain the heat produced by a turbo, fits a wide variety of turbines. The custom cut-to-fit kit comes with an excessive amount of material to cover turbos from the smallest automotive application to heavy-duty truck applications.Two Turbo Kits are available - a four cylinder kit, and a six and eight cylinder kit. Each kit contains a roll of Exhaust Insulating Wrap 1 or 2 inch, 1 yard of Aluminized Heat Barrier, and a 3-foot X 6-inch piece of Exhaust Insulating Wrap. Hardware and instructions are included. Also available with the turbo insulation cover only containing a 3-foot X 6-inch piece of exhaust wrap and a 20-inch X 24-inch piece of Aluminized Heat Barrier.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle
Thermo-Tec
Turbocharger Thermo-Tec

P311-2DB5F99    15074  New

Qty:
In Stock & Ready to Ship
$215.86
Thermo-Tec Turbocharger
  • Rogue Series Ricochet Turbo Cover
  • Rogue Series Ricochet Turbo Cover; T4; Black;
  • Features:
    • New Easy Fit Design
    • Keeps Turbine Spooled Reducing Turbo Lag
    • Dual Layer Construction
    • Increases Performance And Durability
    • Reduces Under Hood Temperatures
    • Improves Horsepower And Performance
    • Maintains Temperatures Inside The Turbo
    • Includes Wiring For Easy Installation
  • The new, easy fit design of the Rogue Series Turbo Cover keeps the turbine spooled up, reducing turbo lag. The dual layer construction increases performance and durability, reduces under hood temperatures, improves horsepower and performance by maintaining temperatures inside the turbo. Includes wiring for easy installation.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle

Showing 1 - 9 of 9 Products for Turbocharger.