Finish Selecting Your Vehicle

Choose your Engine for your 2008 Ford Escape

  • 4 Cyl 2.3L
  • 6 Cyl 3.0L

Shop By Brand

The Following brands are available based on your search.

  • AutoBest
    AutoBest
  • Autopart International
    Autopart International
  • Delphi
    Delphi
  • Holley
    Holley
  • Motorcraft
    Motorcraft
  • US Motor Works
    US Motor Works

Showing Products For 2008 Ford Escape Fuel Pump Module Assembly

Below are all the different brands and applications for 2008 Ford Escape Fuel Pump Module Assembly

Showing 1 - 10 of 27 Products for Fuel Pump Module Assembly.

Refine Your Search

Autopart International
2008 Ford Escape Fuel Pump Module Assembly Autopart International

P311-1B44B0D    W0133-3424090  New

Qty:
In Stock & Ready to Ship
$153.99
Brand: Autopart International
Additional Fitment Information:
Vehicle Fuel Type
2008 - Ford Escape FULL HYBRID EV-GAS (FHEV)
AutoBest
2008 Ford Escape Fuel Pump Module Assembly 4 Cyl 2.3L AutoBest

P311-549CE81    F1406A  New

Qty:
In Stock & Ready to Ship
$122.45
AutoBest Fuel Pump Module Assembly
  • w/Onboard Refuel Vapor Recovery Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir and Fuel Strainer,GAS
Brand: AutoBest
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
2008 - Ford Escape GAS L 4 Cyl 2.3L 140 -
AutoBest
2008 Ford Escape Fuel Pump Module Assembly 6 Cyl 3.0L AutoBest

P311-549CE81    F1406A  New

Qty:
In Stock & Ready to Ship
$122.45
AutoBest Fuel Pump Module Assembly
  • w/Onboard Refuel Vapor Recovery Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir and Fuel Strainer
Brand: AutoBest
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Ford Escape V 6 Cyl 3.0L 181 2968
US Motor Works
2008 Ford Escape Fuel Pump Module Assembly 6 Cyl 3.0L US Motor Works - ELECTRIC FUEL PUMP MODULE

P311-5BEC77A    USEP2440M  New

Qty:
In Stock & Ready to Ship
$190.35
US Motor Works Fuel Pump Module Assembly
  • with onboard fuel vapor recovery
  • ELECTRIC FUEL PUMP MODULE
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
  • Includes: Tank Seals, Hardware
Brand: US Motor Works
Additional Fitment Information:
Vehicle Block Engine CID CC
2008 - Ford Escape V 6 Cyl 3.0L 181 2968
US Motor Works
2008 Ford Escape Fuel Pump Module Assembly 4 Cyl 2.3L US Motor Works

P311-0B80569    USEP2495M  New

Qty:
In Stock & Ready to Ship
$137.49
US Motor Works Fuel Pump Module Assembly
  • WITH ONBOARD VAPOR RECOVERY
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
  • Includes: Tank Seal
Brand: US Motor Works
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
2008 - Ford Escape GAS L 4 Cyl 2.3L 140 -
Delphi
2008 Ford Escape Fuel Pump Module Assembly 4 Cyl 2.3L Delphi

P311-41F426B    FG0967  New

69369 , 8L8Z 9H307-C , 8L8Z 9H307-D , 8L8Z9H307D , 953-4047 , 9534047 , A27099 , AFS0916S , DFG0967 , E16028 , E2314 , E2386 , E2495M , P76103 , PFS-468 , PFS468 , SP1134 , SP2135M , ZZC2-13-35X , ZZC2-13-35XA , ZZC21335XA

Qty:
In Stock & Ready to Ship
$250.51
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • with Onboard Fuel Vapor Recovery OE Part has White Label on Pump Cover ; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 14
    • Average Flow Rating: 19
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 78.0
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: No
    • Resistance Ohms Empty: 180.0
    • Resistance Ohms Full: 10.0
    • Strainer Included: Yes
    • System Pressure: 73 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Pin
    • Vapor Pressure Sensor: No
    • Voltage: 12.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
2008 - Ford Escape GAS L 4 Cyl 2.3L 140 -
Delphi
2008 Ford Escape Fuel Pump Module Assembly 4 Cyl 2.3L Delphi

P311-58011E1    FG0968  New

69370 , 8L8Z 9H307-B , 8L8Z 9H307-F , 8L8Z 9H307-G , 8L8Z9H307G , 953-4178 , 9534178 , A30289 , AFS0917S , DFG0968 , E16028 , E2314 , E2499M , P76103 , PFS-478 , PFS478 , SP1134 , SP1150 , SP2387M

Qty:
In Stock & Ready to Ship
$217.27
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • without Onboard Fuel Vapor Recovery OE Part has Blue Label on Pump Cover ; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 14
    • Average Flow Rating: 19
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 78.0
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: No
    • Resistance Ohms Empty: 180.0
    • Resistance Ohms Full: 10.0
    • Strainer Included: Yes
    • System Pressure: 73 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Pin
    • Vapor Pressure Sensor: No
    • Voltage: 12.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
2008 - Ford Escape GAS L 4 Cyl 2.3L 140 -
Delphi
Fuel Pump Module Assembly Delphi

P311-1AC5F71    FG1483  New

3924710C1 , EFG1483

Qty:
In Stock & Ready to Ship
$255.27
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 46
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 80.0
    • Notes: Used On 2012 F64 Navistar
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 2
    • Pump Type: Electric
    • Regulator Included: Yes
    • Resistance Ohms Empty: 180.0
    • Resistance Ohms Full: 10.0
    • Strainer Included: Yes
    • System Pressure: 54 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Delphi
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-473F3E1    12-131  New

Qty:
In Stock & Ready to Ship
$705.55
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Returnless; Installs In Any Tank From 7.25 in. To 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-3FEFDF7    12-130  New

Qty:
In Stock & Ready to Ship
$851.97
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 255 LPH; Install In Any Tank From 6.5 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fully Open: 255
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 27 Products for Fuel Pump Module Assembly.