2008 Chrysler Aspen Exhaust Muffler Exhaust - AP Exhaust, BBK Performance, Borla, Dynomax, FlowTech, Flowmaster, Gibson, Hooker, MBRP Exhaust, Magnaflow, Pypes Performance exha

Exhaust Muffler Flowmaster

Part # P311-5E1182D Manu # 53545-10 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $213.20

40 Series™ Delta Force Alcohol Sprint Car Race Muffler
40 Series™ Delta Force Alcohol Sprint Car Race Muffler; 3.5 in. Offset Inlet/3 in. Same Side Offset Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 19.5 in. Overall Length;
Product Attributes:
- Automotive Item Grade: High Performance
- Body Width: 10.000 In.
- Fitment: Universal
- Inlet Connection Type: Pipe
- Inlet Position: Offset
- Inlet Type: Single Offset
- Main Piping Diameter: Oem
- Muffler Series: 40 Series Delta Force
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Same Side
- Outlet Type: Single Offset Outlet
- Sound Level: Aggressive
- Tip Quantity: 0
- WARNING CA Proposition 65: No
Features:
- Durable Fully Welded 16ga Aluminized Steel
- Two Chamber Race Muffler
- Good Decibel Reduction Over Open Headers
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
Alcohol race mufflers incorporate strategically placed "burn holes" inside the muffler in all of the low-pressure areas to prevent damage from excess methanol fuel from puddling and backfiring on deceleration. Through years of racing and partnerships with leading race sanctioning bodies, Flowmaster has developed these specialty mufflers that have been specifically engineered for race vehicles in organizations such as NASCAR, ARCA, and the W.O.O. sprint car series. These include race mufflers for low ground clearance, special race fuels, packaging restraints, etc.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Flowmaster

Vehicle

Exhaust Muffler Flowmaster

Part # P311-0BC81DB Manu # 9430512 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $166.62

50 Series™ Delta Flow Muffler
50 Series™ Delta Flow Muffler; 3.0 in. Offset Inlet/2.5 Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
Product Attributes:
- Automotive Item Grade: High Performance
- Body Width: 9.750 In.
- Fitment: Universal
- Inlet Connection Type: Pipe
- Inlet Position: Offset
- Inlet Type: Single Offset
- Muffler Series: 50 Series Delta Flow
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Outside Diameter: 2.500 In.
- Outlet Position: Dual
- Outlet Type: Dual Offset Outlet
- Sound Level: Moderate
- Tip Quantity: 0
- WARNING CA Proposition 65: No
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
The three chamber design utilizes Flowmaster's Delta Flow(R) technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Flowmaster

Vehicle

Exhaust Muffler Pypes Performance exhaust

Part # P311-3F45EAC Manu # MVS10 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $114.89

Street Pro 14in. 2.5in. off/off
Street Pro 14in. 2.5in. off/off
Product Attributes:
- Body Height: N/a
- Body Width: N/a
- Inlet Connection Type: Clamp-on
- Inlet Inside Diameter: 2.500 In.
- Inlet Outside Diameter: 2.500 In.
- Inlet Position: Offset
- Inlet Type: Single Offset
- Main Piping Diameter: 2.500 In.
- Muffler Count: 1
- Outlet Outside Diameter: 2.500 In.
- Outlet Position: Offset
- Outlet Type: Single Offset
- Shape: Rectangular
- Tip Quantity: 0
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Including Hexavalent Chromium Which Is Known To The State Of California To Cause Cancer; Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- Stainless Steel Construction Resists Corrosion
- Welded Case Ensures Long Life And No Rattle
- Designed To Match Your Needs
- Limited Lifetime Warranty
- Highly Recommended For The Track Where Every 1/10th Counts
- Welded Case Makes For A Sturdy Muffler That Will Not Rattle
- Resists Corrosion
- Superior Flow Improves Gas Mileage
- Delivers The Ultimate In Sound And Performance
- Street Pro Muffler
Don't let the looks of this muffler fool you. Although at idle, you may cause passengers to immediately reach for their seat belts, upon acceleration, a smooth authoritative tone turns apprehension into a reassuring confidence. This is a great street/strip muffler that will maintain its rich sound qualities for the life of the muffler because there is no filler to burn off.Recommended for stock to medium modified vehicles where an aggressive sound is appreciated but not advertised. Designed with acoustics in mind, these resonance chambers create the unique sound of this muffler and keep it that way for years to come. The welded case makes for a sturdy muffler that will not rattle.The aluminizing and seam-coating treatment of our mufflers enables them to resist corrosion and extends the lifespan of the product, while their superior flow improves gas mileage. Pypes mufflers, when used as a Pypes system component, can be precision matched to deliver the ultimate in sound and performance. Sound Rating equals 7.0.
Features:Stainless Steel Construction Resists CorrosionWelded Case Ensures Long Life And No RattleDesigned To Match Your NeedsHighly Recommended For The Track Where Every 1/10th CountsWelded Case Makes For A Sturdy Muffler That Will Not RattleResists CorrosionSuperior Flow Improves Gas MileageDelivers The Ultimate In Sound And PerformanceStreet Pro MufflerInlet Inside Diameter: 2.5 InchOutlet Outside Diameter: 2.5 InchOutlet Type: Single OffsetInlet Type: Single OffsetInstall Method: Clamp-OnInlet Position: OffsetOutlet Position: OffsetShape: RectangleMaterial: 409 Stainless SteelSold As: EachWarranty: Limited Lifetime

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Pypes Performance exhaust

Vehicle

Exhaust Muffler Pypes Performance exhaust

Part # P311-1D95C13 Manu # MVV10 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $113.10

Violator 14in. 2.5in. off/off
Violator 14in. 2.5in. off/off
Product Attributes:
- Body Height: N/a
- Body Width: N/a
- Inlet Connection Type: Clamp-on
- Inlet Inside Diameter: 2.500 In.
- Inlet Outside Diameter: 2.500 In.
- Inlet Position: Offset
- Inlet Type: Single Offset
- Main Piping Diameter: 2.500 In.
- Muffler Count: 1
- Outlet Outside Diameter: 2.500 In.
- Outlet Position: Offset
- Outlet Type: Single Offset
- Shape: Rectangular
- Tip Quantity: 0
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Including Hexavalent Chromium Which Is Known To The State Of California To Cause Cancer; Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- Stainless Steel Construction Resists Corrosion
- Welded Case Ensures Long Life And No Rattle
- Designed To Match Your Needs
- Limited Lifetime Warranty
- Highly Recommended For The Track Where Every 1/10th Counts
- Welded Case Makes For A Sturdy Muffler That Will Not Rattle
- Resists Corrosion
- Superior Flow Improves Gas Mileage
- Delivers The Ultimate In Sound And Performance
- Violator Muffler
Sometimes you just gotta have the best of everything. When it comes to flow, you just can't get anything better than our Violator Muffler. This baby features a straight through path that gives you two options for flow, 90 percent or 95 perent of straight tubing!Finally, the sound of a chambered muffler but the flow of a 'straight thru' muffler. Yet the sound is surprisingly tame when cruising considering the absence of any impedance when you look down its barrel. At idle and low rpm cruising, you will not draw much attention, but upon acceleration, bystanders lookout!The Violator's aggressive sound is the result of a unique internal tube with louvers acting as sound baffles. Highly recommended where the ultimate in sound and flow is preferred. Of course, there are plenty of these mufflers hidden under some fine street machines too. The 409 stainless construction of our mufflers enables them to resist corrosion and extends the lifespan of the product, while their superior flow improves gas mileage.Pypes mufflers, when used as a Pypes system component, can be precision matched to deliver the ultimate in sound and performance. Sound Rating equals 9.0/10.
Features:Stainless Steel Construction Resists CorrosionWelded Case Ensures Long Life And No RattleDesigned To Match Your NeedsHighly Recommended For The Track Where Every 1/10th CountsWelded Case Makes For A Sturdy Muffler That Will Not RattleResists CorrosionSuperior Flow Improves Gas MileageDelivers The Ultimate In Sound And PerformanceViolator MufflerInlet Inside Diameter: 2.5 InchOutlet Outside Diameter: 2.5 InchOutlet Type: Single OffsetInlet Type: Single OffsetInstall Method: Clamp-OnInlet Position: OffsetOutlet Position: OffsetShape: RectangleMaterial: 409 Stainless SteelSold As: EachWarranty: Limited Lifetime

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Pypes Performance exhaust

Vehicle

Exhaust Muffler Pypes Performance exhaust

Part # P311-5656778 Manu # MVV16 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $120.37

Violator 14in. 3in. off/off
Violator 14in. 3in. off/off
Product Attributes:
- Body Height: N/a
- Body Width: N/a
- Inlet Connection Type: Clamp-on
- Inlet Position: Offset
- Inlet Type: Single Offset
- Muffler Count: 1
- Outlet Position: Offset
- Outlet Type: Single Offset Outlet
- Shape: Rectangular
- Tip Quantity: 0
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Including Hexavalent Chromium Which Is Known To The State Of California To Cause Cancer; Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
Features:
- Stainless Steel Construction Resists Corrosion
- Welded Case Ensures Long Life And No Rattle
- Designed To Match Your Needs
- Limited Lifetime Warranty
- Highly Recommended For The Track Where Every 1/10th Counts
- Welded Case Makes For A Sturdy Muffler That Will Not Rattle
- Resists Corrosion
- Superior Flow Improves Gas Mileage
- Delivers The Ultimate In Sound And Performance
- Violator Muffler
Sometimes you just gotta have the best of everything. When it comes to flow, you just can't get anything better than our Violator Muffler. This baby features a straight through path that gives you two options for flow, 90 percent or 95 perent of straight tubing!Finally, the sound of a chambered muffler but the flow of a 'straight thru' muffler. Yet the sound is surprisingly tame when cruising considering the absence of any impedance when you look down its barrel. At idle and low rpm cruising, you will not draw much attention, but upon acceleration, bystanders lookout!The Violator's aggressive sound is the result of a unique internal tube with louvers acting as sound baffles. Highly recommended where the ultimate in sound and flow is preferred. Of course, there are plenty of these mufflers hidden under some fine street machines too. The 409 stainless construction of our mufflers enables them to resist corrosion and extends the lifespan of the product, while their superior flow improves gas mileage.Pypes mufflers, when used as a Pypes system component, can be precision matched to deliver the ultimate in sound and performance. Sound Rating equals 9.0/10.
Features:Stainless Steel Construction Resists CorrosionWelded Case Ensures Long Life And No RattleDesigned To Match Your NeedsHighly Recommended For The Track Where Every 1/10th CountsWelded Case Makes For A Sturdy Muffler That Will Not RattleResists CorrosionSuperior Flow Improves Gas MileageDelivers The Ultimate In Sound And PerformanceViolator MufflerInlet Inside Diameter: 3.0 InchOutlet Outside Diameter: 3.0 InchOutlet Type: Single OffsetInlet Type: Single OffsetInstall Method: Clamp-OnInlet Position: OffsetOutlet Position: OffsetShape: RectangleMaterial: 409 Stainless SteelSold As: EachWarranty: Limited Lifetime

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Pypes Performance exhaust

Vehicle

Exhaust Muffler Flowmaster

Part # P311-0D4A1E9 Manu # 42442 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $129.31

40 Series™ Muffler
40 Series™ Muffler; 2.25 in. Center Inlet/Offset Outlet; Case Dimensions 13 in. Length/4 in. Thick; 19 in. Overall Length; W-9.75 in.; Aluminized Steel;
Product Attributes:
- Body Width: 9.500 In.
- Inlet Connection Type: Pipe
- Inlet Diameter: 2.250 In.
- Inlet Inside Diameter: 2.500 In.
- Inlet Outside Diameter: 2.250 In.
- Inlet Position: Center
- Inlet Type: Dual
- Main Piping Diameter: 2.250 In.
- Muffler Series: Original 40 Series
- Outlet Outside Diameter: 2.500 In.
- Outlet Position: Offset
- Outlet Type: Dual Outlet
- Sound Level: Aggressive
- Tip Quantity: 0
- WARNING CA Proposition 65: No
Features:
- Aluminized Steel
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Flowmaster

Vehicle

Exhaust Muffler Flowmaster

Part # P311-2AB8D2A Manu # 12012409 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $176.20

Super HP-2 Series Muffler
Super HP-2 Series Muffler; 2 in. Center Inlet/Offset Outlet; Oval; 4 in. x 5 in. x 12 in.; 18 in. Overall L; 409 Stainless Steel;
Product Attributes:
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Inlet Diameter: 2.000 In.
- Inlet Inside Diameter: 2.000 In.
- Inlet Outside Diameter: 2.000 In.
- Inlet Position: Center
- Inlet Type: Single Center
- Main Piping Diameter: Oem
- Muffler Series: Hp-2 Series
- Outlet Outside Diameter: 2.000 In.
- Outlet Position: Center
- Outlet Type: Single Offset Outlet
- Sound Level: Aggressive
- Tip Quantity: 0
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Stainless Steel Construction
- Dyno Tuned for Maximum Performance
- Patented Laminar Flow Technology
- Lifetime Limited Warranty
Flowmaster has taken the laminar core of our classic HP-2 muffler and wrapped it in a new compact square case. The new Super HP-2 Series muffler offers the same great performance benefits and moderate tone that you would expect from our laminar flow mufflers, now in a new sleek styling. These mufflers are available in either a 409S stainless steel case or a polishable 304S stainless steel case and in sizes ranging from 2.00 in., 2.25 in. and 2.50 in.. These mufflers are covered by Flowmaster's Lifetime Limited Warranty.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Flowmaster

Vehicle

Exhaust Muffler Flowmaster

Part # P311-31F2752 Manu # 12512304 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $215.00

Super HP-2 Series Muffler
Super HP-2 Series Muffler; 2.5 in. Center Inlet/Outlet; Oval; 4 in. x 5 in. x 12 in.; 304 Stainless Steel;
Product Attributes:
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Inlet Diameter: 2.500 In.
- Inlet Inside Diameter: 2.500 In.
- Inlet Outside Diameter: 2.500 In.
- Inlet Position: Center
- Inlet Type: Single Center
- Main Piping Diameter: Oem
- Muffler Series: Hp-2 Series
- Outlet Outside Diameter: 2.500 In.
- Outlet Position: Center
- Outlet Type: Single Center Outlet
- Sound Level: Aggressive
- Tip Quantity: 0
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Stainless Steel Construction
- Dyno Tuned for Maximum Performance
- Patented Laminar Flow Technology
- Lifetime Limited Warranty
Flowmaster has taken the laminar core of our classic HP-2 muffler and wrapped it in a new compact square case. The new Super HP-2 Series muffler offers the same great performance benefits and moderate tone that you would expect from our laminar flow mufflers, now in a new sleek styling. These mufflers are available in either a 409S stainless steel case or a polishable 304S stainless steel case and in sizes ranging from 2.00 in., 2.25 in. and 2.50 in. These mufflers are manufactured in the USA and are covered by Flowmaster's Lifetime Limited Warranty.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Flowmaster

Vehicle

Exhaust Muffler Flowmaster

Part # P311-5367341 Manu # 9425432 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $146.64

40 Series™ Delta Flow Muffler
40 Series™ Delta Flow Muffler; 2.5 in. Offset Inlet/2.25 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
Product Attributes:
- Automotive Item Grade: High Performance
- Body Width: 9.750 In.
- Fitment: Universal
- Inlet Connection Type: Pipe
- Inlet Diameter: 2.500 In.
- Inlet Inside Diameter: 2.500 In.
- Inlet Outside Diameter: 2.500 In.
- Inlet Position: Offset
- Inlet Type: Single Offset
- Main Piping Diameter: 2.500 In.
- Muffler Series: 40 Series Delta Flow
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Outside Diameter: 2.250 In.
- Outlet Position: Dual
- Outlet Type: Dual Outlet
- Sound Level: Aggressive
- Tip Quantity: 0
- WARNING CA Proposition 65: No
Features:
- Durable Fully Welded 16ga Aluminized Steel
- Race Proven Patented Delta Flow® Technology
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
This two chamber design incorporates Flowmaster's Delta Flow(R) technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Flowmaster

Vehicle

Exhaust Muffler Flowmaster

Part # P311-23200F3 Manu # 8435409 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 17517

Qty:

In Stock & Ready to Ship

Best Price: $192.62

40 Series™ Delta Force Race Muffler
40 Series™ Delta Force Race Muffler; 3.5 in. Center Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
Product Attributes:
- Automotive Item Grade: High Performance
- Body Width: 9.750 In.
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Fitment: Universal
- Inlet Connection Type: Pipe
- Inlet Position: Center
- Inlet Type: Single Center
- Muffler Series: 40 Series Delta Force
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Outlet Type: Single Center Outlet
- Sound Level: Aggressive
- Tip Quantity: 0
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Durable Fully Welded 16ga Stainless Steel
- Two Chamber Race Muffler
- Good Decibel Reduction Over Open Headers
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
The Delta Force 40 series race mufflers utilize Flowmaster's Delta Flow technology and feature excellent power characteristics with good sound reduction qualities. Recommended for all racing applications where mufflers are required with a substantial decibel reduction over open headers.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Flowmaster

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 2008 Chrysler Aspen Exhaust Muffler